Controller 6000
Understand Controller 6000 lifecycle, variants, accessories, and support status.
The Controller 6000 (C6000) is an IP based controller for localized access control, intruder alarms, perimeter security, and business automation. The range was introduced in 2009, initially with WinCE as the operating system. In late 2019, with the release of Command Centre version 8.20, the operating system migrated to Linux for improved security and performance.

🧭 Where to start
Bringing one online / setting it up? → Bringing online and networking
Upgrading factory WinCE controllers? → FAQs - Upgrading Factory WinCE Controller 6000s
Chasing a fault? → Controller Drops Offline Immediately After Coming Online
Just need capacities and limits? → Limits
Lifecycle
C6000 standard manufacture ends
July 2026
C6000 HS manufacture ends
July 2027
C6000 family support ends
July 2031
Note: 6000 controllers now ship with Linux installed. WinCE is no longer available from factory.
Variants
C300100
Standard
The standard 6000 controller
CC 6.01
C300110
Starter Kit
Starter controller variant of the 6000 family
CC 7.30
C300111
2 Door
The 2 Door variant of the 6000 Controller family
CC 7.30
C300101
Enhanced
Enhanced variant of the 6000 controller, dual higher-network-speed
CC 7.10
C305101
High Security
High Sec variant, dual higher-network-speed, high security rating
CC 7.21
C305111
High Sec 2 Door
2 Door High Sec variant, dual higher-network-speed, high security rating
CC 8.10
⚠️ Naming change (2023): "Controller 6000 High Spec" became "Controller 6000 Enhanced" (C300101). "Controller 6000 (HS) PIV" became "High Sec Controller 6000" (C305101). See High Sec Specific Information for details.
Accessories
C300142 / C300182
4H Module / 8H Module
Plugs directly into a 6000 controller, allowing I/O and HBUS port expansion
3E2891 Install Note HBUS Module
C300141 / C300181
4R Module / 8R Module
Plugs directly into a 6000 controller, allowing I/O and CardaxIV or Wiegand reader connection
3E2092 Install Note Reader Module
C200620
PSTN Dialler
Allows a 6000 to be connected to a PSTN
3E5364 Install Note PSTN Dialler
Power LED removal (2025 hardware change)
In 2025 the bright Power LED is being omitted from the controller, as it is no longer a requirement. It is removed at controller serial number 2532XXXXXX onwards. This affects the 6000 Standard, Enhanced, Starter, and 2 Door variants only. SMB and High Sec continue to have them fitted.
In this section
🔗 Related
Controller 7000. The current controller that replaces the 6000 family.
Limits. Capacities, cabling distances, and per-device limits.
Bringing online and networking. Assign an IP and get the controller talking to the server.
Last updated
Was this helpful?
