> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/salto-wired-online-devices.md).

# Salto wired (online) devices

### Introduction

When creating a Salto wired reader with online control unit, you will need to assign an IP address to the control unit and initialise it at the same time.

### Before you begin

Before you begin this procedure, ensure you have created the Salto Door within the Salto application.

### Procedure

1. On the Door screen, click the **Save** button.

   The **Configure** button becomes enabled.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-04220bda8aa10e8616c33ba7a435f7378767f56a%2Fconfiguredoor.png?alt=media)

   **Note:** The **Update Required** button (located at the top of the screen) can be used to transmit new information to this wired door when changes are made. This button is available once the door has been saved and initialised.
2. Click **Configure**.

   The Peripheral screen displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7a390a1483e93988df928b1b969bf288559795b1%2Fperipherals.png?alt=media)
3. Enter the **IP address** you are going to assign to this control unit in your local area network.

   **Note:** Consult your LAN Administrator if you are not sure which IP address should be given to this device. Ensure the IP address is a valid one that is not already in use by another device.
4. Click **Save**.
5. What type of online control unit are you initialising?

   <table><thead><tr><th width="126">If...</th><th>then...</th></tr></thead><tbody><tr><td>UBOX900003<br>(update point),<br>UBOX4000 (update point),<br>OR<br>CU50ENSVN<br>(update point with door control)</td><td><p>either:</p><ul><li>press the <strong>CLR</strong> button on the control unit circuit for several seconds until the LED starts flashing.</li><li>In the Salto application open the ‘Monitoring of online locks’ screen and click the <strong>Maintenance</strong> tab.</li><li><p>Check the checkbox for the door, then click the <strong>Address</strong> button to send the address to the reader.</p><p><strong>Note:</strong> Ensure the LED is flashing on the control unit before addressing the reader.</p><p>OR</p></li><li>initialise the door using the Salto Portable Programming Device (PPD). See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/initialising-a-door-using-the-ppd.md">Initialising a door using the PPD</a>.</li></ul></td></tr><tr><td>CU42E0</td><td>Initialise the door using the Salto Portable Programming Device (PPD). See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/initialising-a-door-using-the-ppd.md">Initialising a door using the PPD</a>.</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/salto-wired-online-devices.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
