> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/initialising-a-door-using-the-ppd.md).

# Initialising a door using the PPD

### Introduction

The Portable Programming Device (PPD) allows data to be transferred between the operator’s PC and the locks. Data is downloaded from the PC to the PPD, and the PPD is used to perform tasks such as lock initialization and emergency openings.

### Before you begin

* It is important that the time is set correctly for the PC on which the Salto software is running, as this controls the time and date settings for locks.
* The locking schedule configured in Salto will be transferred to the door when the door is initialised.
* If you initialize a lock that is already in use, its audit trail is deleted.
* If the Salto Local IO Bridge software has not been installed, the installer will launch when a USB device is connected to Salto ProAccess SPACE.

### Procedure

1. Connect the PPD to the Salto server.
2. On the PPD, switch the **Power** button on.

   The screen on the PPD displays the main menu with the options available.
3. In the Salto application, select **System > PPD**.

   The PPD information screen is displayed.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-5fc669e8f7fb36ae6f0e284bc3163125a36bb0e0%2Fppdconnection.png?alt=media)

   **Note:** It is not compulsory to initialise all of the doors simultaneously, although it is highly recommended not to leave any pending doors.
4. Select the checkbox of the access point for which you want to initialize the lock.

   You can select more than one access point if required. However, you cannot select access points with different calendars; multiple selections must be controlled by the same calendar.

   **Note:** By selecting **Initialise locks**, this will now be one of the options available on the main menu of the PPD.
5. Select the **Initialise locks** checkbox in the Actions To Do panel.
6. Click the **Download** button.

   The PPD progress screen is displayed.
7. Wait for the download to complete. A pop-up is displayed confirming that the operation was completed successfully.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-bda881e969af00cb4e14bf6c859bdaba23c2c5b9%2Ftransfercomplete.png?alt=media)
8. Disconnect the PPD from the PC and take it to the door to initialise it.
9. Connect the 3 pins cable to the PPD. This cable has 3 conductors on one end and an RJ11 phone connector on the opposite end.

   Bluetooth PPD’s do not connect by pins, so if you have a Bluetooth PPD hold it near the lock.
10. Turn the PPD on by pressing the red key once.
11. To initialise the door:
    1. Turn the PPD on by pressing the 'red' key once.
    2. From the PPD main menu, select the **Initialize Lock** menu option.

       The Door list displays.
    3. Select the door that you want to initialiase.

       **Note:** Take extra care that you are selecting the correct door, as the door names have a limited length.
    4. When the name of the door displays on the PPD screen, press the **OK** button on the PPD.

       The message *"Connect to lock"* displays on the PPD.
    5. Press and hold the **CLR** button on the hardware you are initialising.
    6. Insert the 3 pins cable into the lock reader.

       A progress bar displays on the PPD screen, a sharp beep sound is emitted and the LED turns red, indicating that the data transfer is in progress. The message *"Initialized"* displays on the PPD, once the door has been initialised.

       **Note:** If the communication is interrupted for longer than three seconds, you will need to repeat the communication, (i.e. reconnect the PPD).
12. Once you have initialised the door, reconnect the PPD to the PC using the USB cable and select **System > PPD**. This will update the software data comparing it with actual battery status values, as well as pending updates.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/initialising-a-door-using-the-ppd.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
