> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/austco-intercom-feature-configuration.md).

# Austco Intercom feature Configuration

The Austco Intercom licensable feature enables an operator to place an intercom call, or respond to an intercom call from within the Command Centre Client. The Austco Intercom Viewer lists the intercom call events for the intercoms configured for the Viewer, where the call event has not been processed. Selecting a call event displays either the Viewer Panel configured specifically for the intercom for which the call event was generated, or the default Panel.

To configure the Austco Intercom feature, perform the following procedures:

<details>

<summary>Creating the Austco Intercom Viewer</summary>

Perform the following procedure to create the Austco Intercom Viewer:

1. Select the **Viewers** tab on the Command Centre title bar, and then click the **Viewer Configuration** button on the toolbar.

   The Configuration Viewer displays.
2. Click the **New Viewer** button, and then **Austco Intercom Viewer**.

   The Austco Intercom General Configuration pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-beca596474431409e20bd7f023aff47c90e386e3%2Faustcointercomgeneral.png?alt=media)
3. Type in the Name, Viewer Description and select the Division.
4. Select the position of the Viewer's Navigation Panel from the **Dock** drop-down list. Available options are Top, Bottom, Left or Right, with the default value being Top.
5. Select the screen resolution from the **Resolution** drop-down list.

   **Note:** Choose resolution of the screen on which you intend to use this Viewer. If the correct resolution is not selected the Viewer Panel may display with scroll bars.
6. If required, check the **Display viewer when a new intercom request occurs** checkbox.

   When a new intercom call event occurs the Austco Intercom Viewer will pop to the front.

   **Note:** If an Alarm Viewer has been configured to display when a new alarm is raised, the Alarm Viewer may have priority over the Intercom Viewer.
7. Click the **Close** button.

   The Austco Intercom Viewer displays down the left hand side of the Configuration Navigation Panel.
8. Click the **Save** button.

   The Austco Intercom Viewer is saved.
9. Assign the Viewer to the operators who will require it.
10. Right click the **Viewer Configuration** button and select **Reload Viewers**.

    The Austco Intercom Viewer appears in the toolbar.

</details>

<details>

<summary>Configuring the Austco Intercom Viewer</summary>

Perform the following procedure to configure the Austco Intercom Viewer:

1. From the Configuration Viewer, ensure the Austco Intercom Viewer is highlighted in the Configuration Navigation Panel, then click the **Click to configure** button.

   The Austco Intercom Viewer Configuration pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-c0bc0e081ca2a2e96bdfadc55a6c5253c4425f95%2Faustcopanelconfiguration.png?alt=media)
2. Ensure the **All Intercoms** radio button is selected. This Viewer will display events for all intercoms.

   **Note:** The recommended configuration is to create a single Austco Viewer that displays events for all intercoms. Once the viewer and Intercom Panels are configured you can restrict the intercom call events an operator can view by assigning the intercoms to specific divisions. An operator can only process call events for intercoms within their division.
3. Configure the Panel(s) you want to display for each intercom. Create a Panel as follows:
   1. Click the **Create entry** button.

      The Assign Panel for Intercom pop-up opens.

      ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-fdba294dece37533eb6dafc330b4f561500736a5%2Faustcoassignpanel.png?alt=media)
   2. Select the intercom from the **Select Intercom** drop-down list.
   3. Select the **Creating a new Panel** radio button.
   4. Enter a name for the new Panel, (e.g. Intercom 1 Panel).
   5. Click the **OK** button.

      The Assign Panel for Intercom pop-up closes and the new entry appears in the grid.
4. Click the **OK** button.

</details>

<details>

<summary>Configuring Tiles</summary>

Tiles can be configured to appear on an Intercom Panel. The floating 'Tile Toolbox' contains a list of the tile types that are available for the Austco Intercom Viewer. Tile types available are:

* Camera
* Event Trail
* Guard Tour
* Operator Sessions
* Site Plan
* Status
* Tag Board
* URL Tile

To add a tile to an Intercom Panel:

1. From the Configuration Viewer, ensure the Austco Intercom Viewer is highlighted in the Configuration Navigation Panel and select the Intercom Panel you want to configure from the **Currently viewing panel** drop-down list.

   **Note:** The Panel will display as blank if not previously configured.
2. Double-click the tile entry on the 'Tile Toolbox'.

   The tile appears on the Panel section of the screen, in a position determined by the system.

   **Note:** Once a tile has been added to a Panel, it can be repositioned and resized as required.
3. Move the mouse over the Tile you have added, and click on the **Click to configure** button that appears.

   A Tile Configuration pop-up displays allowing you to configure as required.
4. What type of tile are you configuring?

   <table><thead><tr><th width="174">If...</th><th>then refer to...</th></tr></thead><tbody><tr><td>a Camera tile,</td><td><a href="https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-tiles/configuring-individual-tile-types/configuring-a-camera-tile.md">Configuring a Camera Tile</a></td></tr><tr><td>an Event Trail tile,</td><td><a href="https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-tiles/configuring-individual-tile-types/configuring-an-event-trail-tile.md">Configuring an Event Trail Tile</a></td></tr><tr><td>a Site Plan tile,</td><td><a href="https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-tiles/configuring-individual-tile-types/configuring-a-site-plan-tile.md">Configuring a Site Plan Tile</a></td></tr><tr><td>a Status tile,</td><td><a href="https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-tiles/configuring-individual-tile-types/configuring-a-status-tile.md">Configuring a Status Tile</a></td></tr></tbody></table>

</details>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/austco-intercom-feature-configuration.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
