> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-tiles/configuring-individual-tile-types/configuring-a-camera-tile.md).

# Configuring a Camera Tile

This tile is used to display either a live feed or stored footage (depending upon its configuration) for a camera.

The camera tile can be operated independently from a Viewers Navigation Panel, so can therefore have static configuration (or Operator selected). This tile can be added to any Viewer. Depending on the type of Viewer the Camera tile is being added to, the Camera tile can be configured to show:

* a live feed from a **Specific Camera**, OR
* live or stored footage from a camera which is **Event Based**,
* a blank tile where by an Operator can select a camera at will,
* a live feed from a camera associated with a Spot Monitor or an Intercom,
* live or stored footage from a camera associated with an event source,
* a live video stream from the integrated Camera on the Jacques Intercom Panel from which the call was made.

**Note:** If you intend viewing camera footage on a Spot Monitor Viewer, you need to set up cameras in Configuration Client. See [Setting up DVR Cameras](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/spot-monitor-viewer/setting-up-dvr-cameras.md) for further detail.

### How to configure

1. Double-click on **Camera** on the 'Tile Toolbox'.

   The Camera Tile appears on the Configuration Panel section of the screen in preview mode.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-468308d8171675aeec327a36dc668db7f55c37aa%2Fcamera_previewmode.png?alt=media)

   **Note:** This example is how the tile preview will appear when being placed on an Alarm Viewer only. On a Controlled Challenge Viewer, Monitor Site Viewer or Spot Monitor Viewer, it will remain empty until it is properly configured.
2. Move the mouse over the Camera Tile you have added, and click on the **Click to configure** button that appears.

   The Camera Tile Configuration pop-up displays, and differs slightly depending on the type of Viewer you are adding the Camera tile to:

<details>

<summary>Alarm Viewer or Event Viewer</summary>

![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-5477313da2c962b70c41541f2b979261ca01d2a9%2Fcamera_tilealarmviewer.png?alt=media)

</details>

<details>

<summary>Controlled Challenge Viewer or Monitor Site Viewer</summary>

![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-7d1b6729ab8fc76207f87bb43cae0d53d7f4d390%2Fcamera_tile.png?alt=media)

</details>

<details>

<summary>Spot Monitor Viewer</summary>

![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-3aa164c73f9b3b95e4e19025f0a69f0f76abb2f7%2Fcamera_tileintercomviewer.png?alt=media)

</details>

<details>

<summary>Intercom Viewer</summary>

![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-eb66bd62890ef367183848cd36b798470906ac13%2Faustcocameratileconfig_popup.png?alt=media)

</details>

<details>

<summary>Jacques Intercom Viewer</summary>

![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-4babece422b22444d1dea3bb6580685e5bba4e4e%2Fjacquescameratileconfig_popup.png?alt=media)

</details>

3. Enter an appropriate **Title** for this Tile.
4. Uncheck the **Show Tile Header** checkbox if you want the tile header to be removed in operational mode.

   **Note:** While this feature maximises the available screen real estate, be aware of the following impacts this has:

   * Tile maximise/minimise can only be achieved using hot keys < **Ctrl** + **M** >
   * The Camera tile cannot be manually refreshed.
5. Uncheck the **Show Camera Controls** checkbox if you want the camera controls to be removed on the Camera tile.
6. Do you want a configuration free Camera tile so operators can select a camera to view in operational mode?

   If **no**, go to Step 7.

   If **yes**, click the **Operator Selected Camera** radio button, and go to Step 8.
7. Configure what you want displayed on the tile, as follows:

   <table><thead><tr><th width="228">For...</th><th>then...</th></tr></thead><tbody><tr><td>live feed from a specific camera,</td><td><ol><li>Click the <strong>Please select a camera</strong> button.<br>A browse tool displays, listing all Cameras the operator configuring the tile is able to see, displayed in alphabetical order.<br><img src="https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-ae98862572eb4b8fcc64868a2f321e9cb4f1001b%2Fselectdvrcamera_popup.png?alt=media" alt=""><br></li><li>Select the <strong>Camera</strong> you want to use.</li><li>Click the <strong>OK</strong> button.<br>The pop-up closes and the <strong>Please select a camera</strong> button changes to the name of the Camera you selected.</li></ol></td></tr><tr><td>stored footage recorded automatically in response to an event (as configured in the Action Plan),</td><td>click the <strong>Stored footage from Action Plan Camera(s)</strong> radio button.</td></tr><tr><td>live feed from the Camera(s) that recorded footage in response to the event,</td><td>click the <strong>Live feed from Action Plan Camera(s)</strong> radio button.</td></tr><tr><td>live feed or stored footage from event source camera,</td><td><ol><li>Click the appropriate radio button, (i.e. either <strong>Stored Footage from Event Source Camera</strong> or <strong>Live feed from Event Source Camera</strong>).</li><li>Enter the 'position in list' number of the camera, for stored or live video from a camera associated with the Intercom or Item identified as the source of the event.<br>The system will use the 'position in list' number to find the required camera from the list of cameras configured for the Spot Monitor, Intercom or Alarm Viewer identified as the source of the event.<br><br><strong>Note:</strong> The 'position in list' number of a camera is determined by the order of cameras on the <strong>Cameras</strong> tab in Configuration Client.</li></ol></td></tr><tr><td>live video stream from the integrated Camera on the Jacques Intercom Panel from which the call was made,</td><td>click the <strong>Jacques Video Stream</strong> radio button.</td></tr></tbody></table>

   **Note:** When the application is run, if there is more than one camera to display stored or live video from event related cameras, additional tabs will appear for the tile, with each one displaying the footage or feed from one of the cameras.
8. Click the **Close** button.

   The preview mode of the Camera Tile now displays the title given. It is unable to show a preview of what will appear in operational mode, so when viewed in preview mode the configuration will display a 'still' image that has been shipped with the product.

   **Note:** The Camera Tile is the only tile that can be configured on top of or overlapping other tiles.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-tiles/configuring-individual-tile-types/configuring-a-camera-tile.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
