> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/products/product-advisories/current-advisories/controllers-and-infrastructure/f3x-and-f4x-fence-controller-superseded-september-2026.md).

# F3x and F4x Fence Controller superseded - September 2026

As part of our ongoing commitment to safe, standards-compliant perimeter security, we want to advise of a lifecycle change affecting the F3 and F4 Fence Controller series. Following the release of the F5 and F6 Fence Controllers in March 2026, the F3 and F4 Fence Controllers moved to Superseded status on 1 September 2026.

Your fence keeps running. Superseded means the product is still available while stock lasts and still fully supported, with no new features added. If your site is working and meeting your requirements, nothing needs to happen immediately.

**Why are we making this change?**

IEC 60335-2-76 has been revised, setting stricter requirements for how fence controllers are tested for new installations. The F5 and F6 Fence Controller series is built to the current edition and is the platform we will carry forward. It also brings Smart Sync, which reduces sync wiring and automatically lowers energy levels if synchronization is lost, and SELV Ready capability on the F61 and F62.

**To make sure you have the key information, we've put together an FAQ below:**

​​What are the important dates\* I need to know?

* March 2026 - F5 and F6 Fence Controllers released
* 1 September 2026 - F3 and F4 Fence Controllers move to Superseded status
* While stock lasts - F3 and F4 Fence Controllers, replacement modules and service parts remain available
* 1 January 2030 - Technical support for F3 and F4 Fence Controllers ends

*\*Gallagher will make commercially reasonable efforts to adhere to these dates.*

**​How will my system be repaired?**

F3 and F4 Fence Controllers are serviced by replacing individual modules, and those modules remain available while stock lasts. Once module stock is exhausted, a failed unit is replaced by upgrading to the current controller. The F5 and F6 Series are designed as direct replacements for the F3 and F4 Series, using the same footprint, so that replacement is straightforward.

**Does this affect my warranty?**

No. Your F3 and F4 Fence Controllers carry Gallagher's Five Year Warranty, running from date of manufacture, and supersession does not shorten it. If you maintain continuous Care Plan coverage, that extends by a further five years. Cover can therefore run well past January 2030, and it will be honored. If an F3 or F4 Fence Controller fails under warranty once F3 and F4 parts are exhausted, we supply the equivalent F5 or F6 unit. Full terms are in Gallagher's [Warranty and Returns Policy](https://security.gallagher.com/Legal/Warranty-and-Returns-Policy).

**Is my existing system still compliant?**

Yes. Your installed F3 and F4 system remains compliant with the standards it was certified against. The IEC 60335-2-76 changes apply to new and modified installations rather than retroactively to systems already in the ground. New sites and extensions should use F5 or F6 Fence Controllers.

**What if I extend or upgrade my site?**

Adding an F5 or F6 Fence Controller to an existing F3 or F4 site requires a firmware update to your existing fence controllers first, so the whole system synchronizes correctly. Your Channel Partner will handle this as part of the work, along with checking your Command Centre version supports it.

**What are my upgrade options?**

The F5 and F6 Fence Controllers are Gallagher's current generation of fence controller, compatible with Command Centre v9.40 and above. There is no need to change everything at once. Most sites replace units as they fail, or take a zone at a time when other work is already happening.

**Need to know more or have questions?**

Please contact your Gallagher Channel Partner or your [local Gallagher representative](https://security.gallagher.com/Meet-the-Team) to plan the approach that suits your site.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/products/product-advisories/current-advisories/controllers-and-infrastructure/f3x-and-f4x-fence-controller-superseded-september-2026.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
