Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Disable biometric authentication for a card

Configure MBTB settings for card-only access on IDEMIA (Morpho) biometric readers.

You can disable biometric on a card encoded with the Morpho MIFARE object set to Card Number + Biometric, without re-encoding it to Card Number only. Change the configuration keys below in MBTB (Biobox Toolbox) for card-only user authentication. Click the green tick to apply each change.

The keys depend on the reader and its protocol: Legacy protocol (MA100/120, MA J, MA520, OMA520), Native MA5G (Sigma Lite, Sigma, Extreme), or Sigma in Legacy MA2G.

Legacy protocol readers

This applies to MA100/120, MA J Series, MA520 and OMA520 readers only. It does not apply to MA Sigma range readers in Legacy mode (MA2G).

  • app/bio ctrl/bypass authentication = 1 (default = 0)

Native mode (MA5G) Sigma readers

This applies to MA Sigma readers: MA Sigma Lite, MA Sigma and MA Sigma Extreme.

  • ucc.Finger_bio_auth_rule=0 (default = 0)

  • ucc.per_user_rules=0 (default = 1)

  • ucc.trigger_event=3 (default = 3)

Sigma readers in Legacy mode (MA2G)

This applies to MA Sigma Lite, MA Sigma and MA Sigma Extreme readers in Legacy mode. Change these configuration keys:

  • app/bio ctrl/authent card mode = 0

  • app/bio ctrl/authent ID contactless = 0

  • app/bio ctrl/authent PK contactless = 1

  • app/bio ctrl/bypass authentication = 1

To confirm reader behaviour after the change, see Collect IDEMIA diagnostic logs.

Last updated

Was this helpful?