> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/products/integrations/third-party-readers/idemia-morpho/configure/enrol-cardholder-biometrics.md).

# Enrol cardholder biometrics

Add the Cardholder Biometrics tile and capture fingerprints or MorphoWave hands for a cardholder.

Biometric credentials are captured in the Command Centre Client. Set up the Morpho Biometric Card Type first: see [Create a Morpho biometric card type and reader](https://help.security.gallagher.com/knowledge-hub/products/integrations/third-party-readers/idemia-morpho/configure/create-a-morpho-biometric-card-type-and-reader.md).

### Add the Cardholder Biometrics tile

The Cardholder Biometrics tile captures and verifies biometrics (fingerprint, finger vein and face) and is used only on a Cardholder Viewer.

1. Open the Command Centre Client and go to the **Viewers** menu tab.
2. Select **Cardholder Viewer** and click **Viewer Configuration**.

   ![Viewers menu: Cardholder Viewer](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-45a7eee6c9800d6b3322f34e083ee3257c835e37%2FSECHUB-TS-MORPHO-SETUP-70-cardholder-viewer.png?alt=media)

   ![Viewer Configuration button](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-fa6455c69cce0961bb07201c8221324a864c6fdc%2FSECHUB-TS-MORPHO-SETUP-71-viewer-configuration.png?alt=media)
3. In Viewer Configuration, find the **Cardholder Biometrics** tile in the **Tile Toolbox** and drag it to the window pane.

   ![Viewer Configuration: drag the Cardholder Biometrics tile from the Tile Toolbox into the viewer, then Save (the operator name in the title bar is covered)](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-4df9bf038c45c60e8c4693f81c00b03f56cced8f%2FSECHUB-TS-MORPHO-SETUP-72-tile-toolbox-cardholder-biometrics.png?alt=media)
4. In the Cardholder Biometrics tile click **Click to configure**, make sure **Capture duress biometrics** is enabled, then click **Close** and **Save**.

   ![Cardholder Biometrics Configuration: Show Tile Header, Capture duress biometrics (Finger only), Allow choice of reader database, Show the MorphoWave tab, Show the Face tab](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-fedc9ef59625b3b5554898ccb43c85f3ba2bda89%2FSECHUB-TS-MORPHO-SETUP-73-cardholder-biometrics-configuration.png?alt=media)

### Capture biometrics

1. In the Cardholder Viewer, choose the cardholder to enrol.
2. Click **Capture** for the Main or Duress Biometrics group.

For fingerprint or finger-vein capture, both the **server workstation** and the **client workstation** need **vc10redist\_x86, vc12redist\_x86, vc14redist\_x86 and vc14redist\_x64**.

#### Sigma (fingerprint)

If the redistributables are missing, clicking Capture gives "Failed to capture fingerprints. Reason: Device dll or one of it's dependencies is missing or not registered." The files are in `Utilities\Morpho\Microsoft Redistributables` (see [Microsoft redistributables](https://help.security.gallagher.com/knowledge-hub/products/integrations/third-party-readers/idemia-morpho/configure/idemia-readers-installation-tips.md#microsoft-redistributables)). Otherwise the Capture Finger screen displays, with instructions in each finger capture area.

![Cardholder Viewer, Cardholder Biometrics tile, Finger tab: Main Biometrics Right Index and Left Index with Capture (the cardholder's name is covered)](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-7a52df86dc8e691bba8e475d22407614367b4f8c%2FSECHUB-TS-MORPHO-SETUP-75-cardholder-capture-fingerprint.png?alt=media)

#### MorphoWave (hand)

Enrol a cardholder's fingerprints with a MorphoWave reader. Previously used DESFire cards should not be encoded for different cardholders. These steps follow the *Morpho Biometric Integration, Command Centre Configuration Client User Guide* (part no. **C209000**).

![Cardholder Viewer, Cardholder Biometrics tile, Hand tab with Capture (the cardholder's name and email are covered)](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-2cf3cd5d04e667a4367df478866328fea7387055%2FSECHUB-TS-MORPHO-SETUP-74-cardholder-capture-hand.png?alt=media)

1. Click the **Hand** tab. All eight finger locations showing blank means the cardholder is not enrolled for MorphoWave.
2. Click **Capture**. The MorphoWave Fingerprint Enrolment screen displays; hand overlays briefly show the order of the fingers.

   ![MorphoWave Fingerprint Enrolment: fingerprint quality, left and right hand Access / Unused / Duress, and the Enrolment Reader list (Wave Reader 1 to 3)](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-d22c6a60b598d27c1a0e951baf4f99fa3ce748ea%2FSECHUB-TS-MORPHO-SETUP-76-morphowave-enrolment-readers.png?alt=media)
3. If the Morpho Biometric Card Type allows changes at enrolment, change the defaults if needed: **Fingerprint Quality** (Standard, High or Very High; default and recommended: Standard) and **Access and Duress hands** (Access, Unused or Duress for each hand).
4. If more than one enrolment reader is listed, select the right one.
5. Change the status of each fingerprint as required. At least one fingerprint must be active on each hand.

   ![Fingerprint status: Active, Bandaged, Missing](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-b97dfb391122c84bca22b59a1fa7f38a5f14ae38%2FSECHUB-TS-MORPHO-SETUP-77-fingerprint-status-legend.png?alt=media)
6. Click **Next**. The wizard shows the enrolment screen for the hand set as the access hand.

   * When both hands are "ACCESS" hands, the right hand is enrolled first.
   * Only "ACCESS" biometrics are encoded to the card (a hand set as "DURESS" is not written to the card).

   ![MorphoWave Fingerprint Enrolment with both hands Access and the enrolment reader selected, Next](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-34d202f6f9e24c22673fe6bfed64c7cc9fc4afd9%2FSECHUB-TS-MORPHO-SETUP-78-morphowave-enrolment-next.png?alt=media)

   A **green light** on the MorphoWave reader shows the connection is established.
7. Insert the hand between the cover and the optical sensor, flat, palm down, fingers slightly apart.
8. Slide the hand in the right direction: **right to left for the right hand, left to right for the left hand, index finger first**. When the hand has enrolled, a message says the device is ready for the other hand.

   ![MorphoWave hand wave: from the left with index finger first to enrol the left hand, from the right with index finger first to enrol the right hand](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-63384af2e4b3aeea94f1ae5ffa214d0f936fcf80%2FSECHUB-TS-MORPHO-SETUP-79-hand-wave-direction.png?alt=media)

   * After **5 unsuccessful attempts** the system times out.
   * A failed enrolment shows the reason, for example "Bad hand direction" (hand slid the wrong way) or "Wave hand in parallel" (hand not waved properly between the cover and the optical sensor).
9. Repeat steps 7 and 8 for the other hand. When it has enrolled, a message says so and **Accept** becomes available.
10. Click **Accept**. The enrolment screen closes and the **Hand** tab shows the enrolled fingerprints.

    ![Cardholder Biometrics, Hand tab: enrolled fingerprints, left hand Duress and right hand Access, with Capture, Clear and Verify](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-d3cf25395862b9c6960cb87360cc89ed4a9f0f5e%2FSECHUB-TS-MORPHO-SETUP-80-hand-tab-enrolled.png?alt=media)

    * The MorphoWave DESFire object does **not** encode "UNUSED" and "DURESS" fingerprints to a card; only "ACCESS" fingerprints are encoded.
    * Once fingerprints are enrolled and saved (database and card, or database only), any change to fingerprint status shows on the tile: "If these biometrics are encoded to a card, the card will need re-encoding."
    * If both hands have been changed to "UNUSED" for a cardholder enrolled before, the tile shows: "At least one hand must be set to Access to use the reader. If these biometrics are encoded to a card, the card will need re-encoding." When the operator starts encoding the card ("Card Number + Biometrics"), a warning offers to proceed or not:

    ![No Access Hand: Encoding the card with both hands 'unused' will remove the fingerprints from the card, and access will be denied at MorphoWave Biometric Readers. Would you like to proceed? Yes / No](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-0035dc0bb68fe62d09ddf310e8e3c9611f157dd3%2FSECHUB-TS-MORPHO-SETUP-81-no-access-hand-warning.png?alt=media)

    **IMPORTANT:** even if the card is encoded, the cardholder cannot access any MorphoWave biometric reader. A card with other objects (for example a MIFARE DESFire object) can still be read by Gallagher readers.
11. Click **Save** to save the fingerprints to the database, or **Revert to Saved** to undo.
12. Click **Verify**. If more than one enrolment reader is available, select the right one and click **Next**. The tile says which hand to verify.

    ![Cardholder Biometrics, Hand tab: Ready to verify right hand](https://328339335-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6bM8WhlBE9BYizPWJaPN%2Fuploads%2Fgit-blob-b65b0b921745068bf0f2b42c9823ac266dfd84e1%2FSECHUB-TS-MORPHO-SETUP-82-ready-to-verify-right-hand.png?alt=media)
13. Wave that hand over the enrolment reader. A message confirms the hand, then says the reader is ready for the other hand.
14. Wave the other hand. A message confirms it.
15. Click **Close**.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/products/integrations/third-party-readers/idemia-morpho/configure/enrol-cardholder-biometrics.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
