For the complete documentation index, see llms.txt. This page is also available as Markdown.

Create a Morpho biometric card type and reader

Create the Morpho Biometric Card Type and a Morpho Biometric Reader in Configuration Client, and assign the reader.

Set up MorphoWave and Sigma readers in Configuration Client: first the Morpho Biometric Card Type, then the reader, then assign the reader to a controller and the devices it serves.

Create the Morpho Biometric Card Type

A Morpho Biometric Card Type must be created in Configuration Client before the readers are added.

  • Only one Morpho Biometric Card Type is available per Command Centre server.

  • Operators need the Configure Site privilege to create, edit, view and delete Biometric Types, including the MIFARE Key on the Card Encoding tab. With View Site but not Configure Site, an operator can view the Biometric Type properties except the MIFARE Key properties.

  • Multi-server systems: each server needs its own Morpho Biometric Type set up manually. Otherwise cardholders with a Biometric Type from a remote server are not replicated on the local server. Biometric inactivity is managed by each server independently, using the Morpho Biometric Type configuration unique to that server.

  1. In Configuration Client, click Configure > Card Types. The Card Type list window opens.

  2. Right-click and select New… > Morpho Biometric Type. The General tab displays. Only one Morpho Biometric Type can exist in the system at any one time.

    Card Type list: right-click New > Morpho Biometric Type
  3. Enter a Name and Description, and select the Division.

  4. Click the Card Encoding tab.

    Morpho Biometric Type 1 Properties, Card Encoding: Region Code A, Facility Code 49999, Current Facility Codes A49999, fingerprint and finger vein starting sectors, Import Keys and Export Keys, MIFARE Classic A Key and DESFire Key (masked) with Generate key
  5. Configure the settings on this screen as appropriate:

    Field
    Description

    Region Code

    The letter representing the Region Code for your Facility Code. Note: 'A' is the default and should be changed to match the Region Code in your site licence. See the Licensing tab of the Server Properties for the Region Code.

    Facility Code

    Although any Facility Code can be used for the Morpho Biometric Card Type, we recommend the Facility Code listed in the site licence (Licensing tab of the Server Properties). ⚠️ The Facility Code can only be changed once. If changed, all existing fingerprint templates must be re-captured.

    Current Facility Codes

    If your site Facility Code has already been entered, select it from this drop-down list. Adjust the card number allocation of the existing Card Type; the range needs to be 31 to 8388607.

    Capture Type

    Options for 'Fingerprint Only' or 'Fingerprint +Vein'. This drives the system's behaviour for the correct templates to capture during enrolment, and the associated warnings.

    Card Facility field descriptions: Region Code, Facility Code, Current Facility Codes, Capture Type
  6. The Card Encoding section is required for card encoding:

    Field / Button
    Description

    Fingerprint Starting Sector and Finger Vein Starting Sector

    Select which sector of the MIFARE object is used (range 1 - 6, default 1).

    MIFARE Classic A Key

    Protects reading cards encoded with Morpho biometric templates; gives read access to the Morpho section of encoded cards. The A Key on the Morpho Card Type should match the A Key on the Card Object. The key must be unique to the site, to prevent cards being used on other sites, so use the Generate key button. The key is masked with 'X' characters once Apply is clicked.

    Generate key button

    Generates a random value for the MIFARE Classic A Key field.

    DESFire Key

    Controls access to the Morpho data encoded on a card. To prevent cards from another site being used, the key must be unique: use the Generate key button. The key is masked with 'X' characters once Apply is clicked.

    Generate key button

    Generates a random value for the DESFire Key field.

    Card Encoding field descriptions: starting sectors, MIFARE Classic A Key, DESFire Key and the two Generate key buttons
  7. Multi-server: export a key to send to another system:

    1. Click Export Keys…. A "Please choose a password" dialog displays.

    2. Enter a password (at least 8 characters, at most 32).

    3. Click OK. A Save As dialog displays with the default file name MorphoBiometricKeys.txt.

    4. Change the file name if required, and go to where you want to save it.

    5. Click Save. The message "Key successfully exported and protected by your password" displays.

  8. Import a key from an exported file:

    1. Click Import Key….

    2. Go to the key file and select it.

    3. Click Open. An "Enter password" dialog displays.

    4. Enter the password for the key file (the site that exported the key supplies it).

    5. Click OK. The MIFARE Classic A Key field shows 'IMPORTED KEY', and/or the DESFire Key field shows 'XXXXXXXXX IMPORTED KEY XXXXXXXXX', to confirm the import. Keys exported by Command Centre versions earlier than vEL8.00 cannot be imported.

    6. Click Apply to save the new key(s). The key is masked with 'X' characters.

  9. Click the Biometric Inactivity tab.

    Biometric Inactivity tab: Disable Inactive Biometrics, disable biometrics after 30 days of inactivity
  10. Do you want to enable the Inactive Biometrics Expiry feature?

    If…
    then…

    yes

    check the Disable Inactive Biometrics checkbox, and go to step 11.

    no

    leave the Disable Inactive Biometrics checkbox unchecked, and go to step 12.

    Inactive Biometrics: yes, check Disable Inactive Biometrics and go to step 11; no, leave it unchecked and go to step 12
  11. Enter the number of days of inactivity that will disable biometrics.

    • When the feature is first enabled the default timeout is 30 days; the range is 1-999 days.

    • Set to 1 day, biometrics become disabled 24 hours to the second after Apply is clicked.

    • Cardholders are expired regardless of activity if card activity events are not configured to log events throughout the site (Event Defaults tab of the Server Properties).

  12. Click the Advanced tab. The fields show any previously configured values for existing biometric types.

    Advanced tab: Privacy Settings (Save biometrics to database), Duplicate Detection with Threshold, Send encryption keys via network
  13. Configure the Privacy Settings (Template Storage Mode): whether biometric templates are stored in the Command Centre database, and whether operators may override this for individual cardholders. For privacy reasons some sites prevent templates from being stored in the database and encode them onto cards instead.

  14. Duplicate Detection prevents the same fingerprint, vein or Wave template from being enrolled twice. Tick Prevent duplicate biometrics from being enrolled if required, and select the Threshold.

    • The first time this option is applied, the system checks for duplicate fingerprints and raises an event for each duplicate it finds.

    • Duplicate Detection needs an IDENT licence and USB dongle (C864403/C864405) on the server.

  15. Keep Send encryption keys via network ticked if you want Command Centre to send the encryption keys and certificates to the readers over the network. Without it, a separate Biometric Encryption Utility (on a laptop or similar in a safe room or network) connects to the readers and assigns the keys and certificates, from the reader properties.

MorphoWave readers: the MorphoWave tab

  1. If the site uses MorphoWave readers, click the MorphoWave tab.

    Morpho Biometric Type 1 Properties, MorphoWave tab: Fingerprint Quality, Access and Duress hands, Enrolment reader(s) with Reader Name, Reader IP Address and Workstation

    This screen identifies network-connected MorphoWave readers intended for enrolment.

    • MorphoWave readers used for enrolment are not added to Command Centre as Morpho Biometric Reader items. They are configured only on this screen and are limited to enrolment. If a site wants to use an enrolment reader for access, remove the enrolment configuration and create the reader as a Morpho Biometric Reader item, so it can be used at a door.

    • Encrypted MorphoWave readers cannot be used for enrolment. A connection error is seen when trying to capture.

  2. Configure the settings:

    Section
    Description

    Fingerprint Quality

    The default acceptable fingerprint quality (default and recommended: Standard). Tick Allow change at enrolment to let operators change it at enrolment.

    Access and Duress hands

    Default access and duress hands (default: both hands for access, so none for duress). At least one hand must be selected for access. Tick Allow change at enrolment to let operators change it at enrolment.

  3. Add the network-connected MorphoWave readers used for enrolment: click Add. The Add or Modify Enrolment Readers dialog displays.

    Add or Modify Enrolment Readers: Reader Name, IP Address and Workstation (the PC name is covered)
  4. Enter the Reader Name and IP Address, and select the Workstation.

  5. Click OK. The reader's details fill the Enrolment reader(s) grid. Modify and Delete change or remove existing enrolment readers. Enrolment of a cardholder's fingerprints for a MorphoWave reader is done in the Cardholder Biometrics tile in the Command Centre client (see "Cardholder Biometrics Tile actions" in the Command Centre Client Help).

    Cardholder Biometrics tile, Hand view: left and right hand, Access, Unused and Duress

Sigma readers: the Morpho Finger tab

  1. If the site uses Morpho fingerprint or finger-vein readers, click the Morpho Finger tab (if not, skip to the result below).

    Morpho Biometric Type 1 Properties, Morpho Finger tab: Capture Type Fingerprint Only, main finger defaults Right Index and Left Index, duress finger defaults Right Middle and Left Middle
  2. Configure the settings:

    Field
    Description

    Capture Type

    Options for 'Fingerprint Only' or 'Fingerprint +Vein'. This drives the system's behaviour for the correct templates to capture during enrolment, and the associated warnings.

    Main Finger Defaults *

    Select the fingers to use for normal day-to-day identification at a reader.

    Duress Finger Defaults *

    Select the fingers to use for identification at a reader when under duress.

    Morpho Finger field descriptions: Capture Type, Main Finger Defaults, Duress Finger Defaults

    All four finger selections on this screen must be unique. Otherwise an error message displays.

Result: a Morpho Biometric Card Type has been configured and is ready to use. To capture fingerprints against cardholders, see Enrol cardholder biometrics. You cannot delete Morpho Biometric Types if any cardholders are enrolled with Morpho biometrics, or any Morpho Biometric Readers are assigned to Gallagher controllers, doors, elevator cars or HLI elevator cars.

Create a Morpho Biometric Reader

This creates a new Morpho Biometric Reader and configures its system-wide settings. A Morpho Biometric Type must already exist (above).

  1. In Configuration Client, click Configure > Hardware. The Hardware list window opens.

  2. Right-click and select New… > Morpho Biometric Reader. The General tab displays.

    Hardware tree: right-click New > Morpho Biometric Reader (the site name, a staff member's name, is covered)
  3. Enter a Name and Description, and select the Division.

  4. Click the Event Response tab and assign a primary Alarm Zone for all events.

  5. Click the Alarm Instructions tab and assign Alarm Instructions to each Event Type and/or Event Group as required.

  6. Some Morpho readers have front and rear tampers (optical or switches) that detect the glass being removed or damaged, or the reader being removed from the wall. By default, either tamper raises an alarm, sounds a buzzer and flashes an LED. To stop tamper alarms, click Status and Overrides and set Tamper Setting to "Disabled". Or set it to "Send alarm" to raise an alarm without the buzzer. Other temporary security overrides are also on this tab (see "Performing Overrides on a Morpho Biometric Reader").

  7. Click the Connections tab and select the controller the reader is connected to.

    Morpho Biometric Reader 1 Properties, Connections: Reader interface Controller 7000 Single Door - Wiegand, Reader number 1
  8. Click the Setup tab. (Just change the IP and leave the defaults, unless you want to change or use the other settings.)

    Morpho Biometric Reader 1 Properties, Setup: Reader Connection IP address (covered), Encrypt TCP/IP Communications, Authentication Method Biometrics and Card, Permitted Card Technology Use the server settings, Set MIFARE Key
  9. Configure the Reader Connection section. The fields show any previously configured values for existing readers.

    Field / Checkbox
    Description

    IP Address

    The IP address of this reader (as configured earlier: see MorphoAccess readers: IP address). DHCP is not supported for Morpho readers' IP addresses. (Default = 192.168.1.10)

    Encrypt TCP/IP Communications

    Off (disabled) by default.

    Reader Connection field descriptions: IP Address and Encrypt TCP/IP Communications
  10. Configure the Authentication Method section:

    Field / Checkbox
    Description

    Authentication Method

    Decides whether the cardholder has card-only access, must present a finger, enter a PIN (or both), or use a QR code. The reader authenticates a cardholder by one of: Biometrics (identification); QR Code (verification with a QR code); Card (identification, or verification with biometric, or ID on card). If the Authentication Method is changed, the database does not re-sync. When Card is selected and Require PIN to grant access (Advanced Settings tab) is enabled, a cardholder whose card has no PIN set is denied access.

    Authentication Method field description
  11. In Permitted Card Technology, Use the server settings is selected by default. To accept other card types at the reader, untick it and tick the card types. If you set a Morpho reader to follow the site default but the site default allows neither of the Morpho reader's card technologies (MIFARE Classic or DESFire), you get "The selected permitted card technology settings are not supported by the biometric reader". Either allow at least one of the two in the server settings, or do not have the Morpho reader follow the site-wide settings.

  12. If cards are encoded with Morpho data, the MIFARE data must be sent to the reader: click Set MIFARE Key on each Morpho reader that will be used with the cards. The reader's MIFARE key is updated. IMPORTANT: this must be done at least once if the site plans to use cards with the reader.

  13. Click the Advanced Settings tab.

    Morpho Biometric Reader 1 Properties, Advanced Settings: Auto Synchronise, Enable polling every 300 seconds, double card overrides, False Acceptance Rate < 0.01%, Require PIN to grant access, Reader Screen and OSDP Reader Display Messages
  14. Communication settings (leave as default):

    Field
    Description

    Auto Synchronise

    The reader is updated on a real-time basis (as soon as a change is made in Command Centre). If unticked, an operator can still update the reader manually with the manual options, including macros. (Default = checked)

    Enable polling

    The reader is polled as soon as its Poll Time has elapsed since the last connectivity poll, biometric update, database resync, reader configuration or refresh status request. (Poll Time range = 10 - 300 seconds.) A high polling frequency (a low polling interval) might not be achievable on sites with a lot of readers; contact Gallagher Technical Support. Higher polling rates mean a longer delay before offline alarms occur. If polling is enabled for an MA520 Morpho reader, the reader cannot read biometrics, and so give access, for 3 seconds while polling.

    Double card overrides

    To configure double card overrides for this reader, click Override access zone or Arm alarm zone, depending on whether the override should change the state of the Access Zone or arm the Alarm Zone associated with it. Leave Disabled checked if not required.

    Communication field descriptions: Auto Synchronise, Enable polling, Double card overrides
  15. Authentication settings (leave as default):

    Field
    Description

    False Acceptance Rate (FAR)

    The required closeness of a match when comparing two templates to verify captured biometric templates. The FAR setting affects the False Rejection Rate (FRR): the lower the FAR, the higher the FRR. A low FAR is more secure (less chance of authenticating someone it shouldn't) but more likely to fail someone it should (a higher FRR). (Default = < 0.01% Recommended value)

    Require PIN to grant access

    Only for biometric readers with PIN-entry keypads. Overrides the 'Reader ignores PIN' setting on the card layout; the reader always asks for a PIN. Requesting PINs for MA Sigma Extreme readers in Legacy mode (MA2G) is NOT supported. With it enabled, the Biometrics and QR Code authentication methods (Setup tab) cannot be applied.

    Authentication field descriptions: False Acceptance Rate and Require PIN to grant access
  16. Reader Screen settings:

    Field / Checkbox
    Description

    Display Date and Time

    Morpho reader models with screens, in Native Mode (MA5G), display the date and time.

    Display Cardholder Name after access is granted

    The reader shows the cardholder's name ("Surname,firstname", limited to 38 characters) in the welcome message when a fingerprint or Wave template is recognised. A cardholder's Short Name (limited to 16 characters) is shown instead, if they have one.

    Reader Screen field descriptions: Display Date and Time, Display Cardholder Name after access is granted
  17. Do you want access and status messages shown on this reader's screen?

    If…
    then if the Server Properties are configured to…

    no

    NOT show reader messages, leave Use site default settings checked; OR if the Server Properties ARE configured to display reader messages, untick Use site default settings and make sure Show reader display messages is unticked.

    yes

    show reader messages, leave Use site default settings checked; OR if the Server Properties are configured to NOT display reader messages, untick Use site default settings and tick Show reader display messages.

    Reader display messages: what to set for no and yes, depending on the Server Properties
  18. Click the Legacy tab.

    Morpho Biometric Reader 1 Properties, Legacy: FingerVein Fingerprint Mode, Connection Mode MA5G Mode (read-only)
  19. Fingerprint Mode (ticked by default) lets a finger-vein or MorphoWave reader work on fingerprints only, for the enrolment transition from Fingerprint to Fingerprint + Vein. Untick it if not needed.

  20. Connection Mode shows the mode originally specified for Legacy readers. It is read-only, as Legacy readers are no longer supported.

  21. Cameras tab: associate DVR camera(s) with the reader.

  22. Icons tab: change the reader's icon set.

  23. Notes tab: add notes about the reader.

  24. Click OK to save and exit, Cancel to exit without saving, or Apply to save and stay.

Assign a Morpho Biometric Reader

Assign the reader to a Gallagher controller and the other devices it serves (door, HBUS Wiegand Door Module, terminal, elevator car and/or HLI elevator car). From the Hardware or Door list window, highlight the device:

  1. Right-click and select Properties.

  2. Which tab to use:

    If…
    then click the…

    HBUS Wiegand Door Module

    Readers tab

    Door

    Entry/Exit Zone tab

    Terminal, Elevator Car or HLI Elevator Car

    Readers tab

    The window varies with the device. The example is a door:

    Door 1 Properties, Entry Zone: Entry is controlled by Reader(s), the Reader(s) list with Morpho Biometric Reader 1
  3. Select the Morpho Biometric Reader(s) from the reader drop-down list:

    Gallagher…
    can host a maximum of…

    Controller 6000, Controller 7000

    4 x Morpho readers for 8R; 2 x Morpho readers for 4R

    Single Door Wiegand Controller

    1 x Morpho reader

  4. Click OK to save and exit, Cancel to exit without saving, or Apply to save and stay.

Result: the Morpho Biometric Reader is configured and ready for use.

  • A Morpho Biometric Reader can be synchronised using macros.

  • You cannot delete a Morpho Biometric Reader if it appears on a Site Plan.

  • Disable encrypted communications on a Morpho Biometric Reader before deleting it (recommended).

Last updated

Was this helpful?