For the complete documentation index, see llms.txt. This page is also available as Markdown.

Scanning passports or driver licenses for visitors

Introduction

You can scan a visitor’s passport or driver’s license and the details taken will automatically populate the visitor fields using Optical Character Recognition (OCR). You can also select whether an image of the passport or driver’s license will be captured and stored against the visitor.

Notes:

  • The OCR functionality for passports and driver’s licenses supports English language only.

  • The ability to capture a passport or driver’s license image is supported using the SnapShell P5 Scanner, which supports Microsoft Windows 8 and 10 (32 & 64 bits).

Procedure

Perform the following procedure to scan a visitor's passport or driver's license:

  1. Click the Visitor Name hyper-link located on either the Visit, Find Visit or Home screens.

    The Visitor screen displays.

    Notes:

    • If you don't have the required user privileges, the visitor's details display as read-only.

    • The Scan and Configure buttons (at the lower left of the window) do not appear if you accessed this window via the Find Visitor search (on the Home screen).

  2. Select the appropriate document type, (e.g. Driver’s License, Passport), from the drop-down list.

    Note: The document types that appear in the drop-down are determined by what Data Maps have been created in Command Centre Client.

  3. Place the passport or driver's license in the scanner, and click the Scan button.

    Note: To ensure passports scan properly, we recommend you hold the lid of the scanner down so they lie flat.

    The visitor fields are populated with details from the passport or driver's license, and if configured to do so, an image of the document appears on the Visitor screen.

  4. Check that the details mapped to the visitor fields have been captured correctly.

    Correct any mistakes manually.

    Notes:

    • If no information or only partial fields are captured, you may want to try re-scanning before manually populating fields.

    • The system does not verify that the document scanned is either a valid or current form of ID.

  5. Click the OK button to save the visitor.

Last updated

Was this helpful?