Capturing images to store against a visitor
Introduction
Multiple images can be captured and stored against a visitor, and the type of device to be used for capturing images can be configured. The options available are:
to capture an image of the Visitor via a supported digital camera or a web cam;
to capture an image of the Visitor’s business card from a supported document scanner;
to capture an image of the Visitor’s supporting documentation (e.g. letter of recommendation, Passport, National ID card, etc.) from a supported document scanner.
Note: Up to A4 size will be supported.
Procedure
Perform the following procedure to configure an image PDF using a specific image capture device:
Click the Visitor Name hyper-link located on either the Visit, Find Visit or Home screens.

The visitor's details are displayed in the Visitor window.

Note: The size of this window will automatically resize depending on the number and size of image PDFs configured up to a maximum, based on the size of the workstation monitor, (or the primary monitor if a workstation has multiple monitors), on which the user is looking at this window. A scroll bar appears if all the image PDFs cannot be seen on the resized screen.
If required for an image PDF, configure the image capture device settings by clicking the Configure button.
The Capture Device configuration dialog displays.
Note: The options for "When image is too large" and the "Rotate image 90 degrees clockwise on capture" checkbox only appear when the DirectShow API is selected.
Configure the settings as appropriate:
FieldDescriptionAPI
The options available from the drop-down are: - DirectShow (Legacy) - DirectShow - TWAIN - Cardscan (Note: This option will not be available if your site has installed/upgraded with NPSA=1 in the licence file.) (Default = DirectShow)
Device
This drop-down populates with relevant devices associated with the API selected. The default "Any Device" option may use an imaging device not currently connected to the workstation.
Displayed Name
This is an optional string that can be displayed as a Tool Tip when the mouse pointer hovers over the Capture button on the Visitor window. This can be useful as an indication of which imaging device to use. (Maximum = 200 characters)
Device Timeout
This option is useful for allowing sufficient time to get an image from some slower devices, (e.g. the timeout value may need to be set to 6 seconds for the iBall Document Scanner). (Default = 3 seconds. Range = 1 - 30)
Capture image when scanning business card
If you check this box for any of your configured images, then when a ‘Scan Business Card’ is done (via the Visitor window), it will update each of those image PDFs with the scanned image of this card.
Click the OK button.
The Capture Device configuration dialog closes.
Click the Capture button.
The type of imaging device associated with the Image PDF determines what window will display, as follows:
If a... and the API is... then a... digital camera or web cam,
DirectShow (Legacy)
Camera Viewer displays.

Click the Capture button. The Camera Viewer closes, and the captured image appears on the Visitor screen, cropped to fit the image PDF.
DirectShow
Camera Viewer displays.

This screen gives you the opportunity to adjust the image before capturing it, as follows:
Clicking Rotate Left
turns the image 90 degrees anti-clockwise.Clicking Rotate Right
turns the image 90 degrees clockwise.Crop to fit
(which changes to Shrink to fit
when clicked), allows the image to either be cropped or shrunk to fit.
Make adjustments (if required), and click the Capture button. The Camera Viewer closes, and the captured image appears on the Visitor screen.
TWAIN or Cardscan scanner,
Scanner Properties dialog displays, with a Scan button on it. Note: The user interface will be device specific. Click the Scan button. The Scanner Properties dialog closes, and the captured image appears on the Visitor screen. Images captured by these devices always resize to fit the image PDF.
Notes:
Images captured will always maintain their aspect ratio.
If an image is a mandatory field you will get an error if you try to click OK without capturing the image, but you may need to scroll along to find the required image, which will be highlighted in yellow.
Click the OK button to save the visitor.
Last updated
Was this helpful?
