Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Lock out a fence zone

Stop a fence zone pulsing so it can be worked on safely, from a Gallagher T20 Terminal.

Lockout lets someone work on a fence knowing it will not be energized.

Required privilege: your Access Group must have Lock out fence zones and must list the fence zone's alarm zone. It also needs View alarms and items for that alarm zone, or the fence controller does not show on the Fences screen.

Rules

What happens during a lockout

  • The fence is not pulsed, so no deterrent is delivered.

  • Overrides and state changes are ignored.

  • Scheduled changes do not take place.

  • Requests to arm are ignored and discarded. Turning the zone on from a Command Centre workstation has no effect, although the zone can still show as armed.

  • If the fence controller is then put into Service mode, the magnetic key cannot arm or disarm a locked-out fence zone. This applies to F3x, F4x, F5x and F6x fence controllers.

  • Alarms are still raised. Command Centre raises an alarm for each locked-out fence zone.

Lock out one fence zone

  1. Log on. If the fence controller list isn't showing, choose Fences from the Menu.

  2. Select the fence controller and press More.

  3. Select the fence zone and press Lockout. Or press More, choose Lockout and press Select.

Lock out every fence zone on a fence controller

  1. Log on. If the fence controller list isn't showing, choose Fences from the Menu.

  2. On the Fences screen, select the fence controller.

  3. Press Lockout.

This locks out all the fence zones on that controller.

Cancel a lockout

  1. At the terminal that started the lockout, go back to the Fences screen and select the fence controller.

  2. Press Undo Lockout.

  3. For each fence zone, the terminal asks Do you want to undo this lockout? Choose Yes.

To undo the lockout on one fence zone, open the fence zone at the same terminal (select the fence controller, press More, select the zone, press More), choose Undo Lockout and press Select.


🔗 Related

Last updated

Was this helpful?