Connect Fibre Transceiver power and ground
Learn how to power, ground, and electrically isolate Gallagher Fibre Transceivers.
Connect each Fibre Transceiver to a suitable power supply and a common ground. Isolate the unit from metallic surfaces.
Connect power and ground
Use the same power supply provided to the connected controller. A Fence Controller can power its connected Fibre Transceiver.
Connect the transceiver power negative to the HBUS device negative, or 0 V. Devices that use separate supplies must share a common ground.
Connect 0 V from the Controller 6000 to the Fibre Transceiver. Connect 0 V from the Fibre Transceiver to its HBUS devices.
Recommended configuration
Power each N12 from its connected Fence Controller. Battery-backed Fence Controllers provide a stable transceiver power supply.
Isolate the unit
Electrically isolate the Fibre Transceiver from metallic surfaces.
Use isolation part G28813 with N11 and N12 units. It is supplied in packs of 10.
🔗 Related
Configure HBUS biasing and termination explains HBUS commissioning requirements.
Fibre Transceiver communication issues covers intermittent communication faults.
Gallagher Fibre Transceiver identifies supported variants and topologies.
Last updated
Was this helpful?
