Roll keys on cards for a new SSK site
Migrate cards encoded with Gallagher Default keys to a new site's Site Specific Key.
When Command Centre is installed fresh from vEL8.20 onwards, a Site Specific Key is generated for that system. If cards were ordered from Gallagher Sales before that SSK was provided, the order is processed and the cards are encoded with the Gallagher Default keys. Those cards will not work on the site.
This procedure rolls the keys on those cards from the Default keys to the site's SSK.
Export and save the SSK
Note. This is critical. Save a copy before making any changes, because you will need it afterwards. Send the exported file to Gallagher Sales, separately from the password, so future card orders can be encoded correctly.
In Configuration Client, go to Server Properties > Card Security. The site shows the key seed masked with X characters.
Click Export Keys….
Enter a strong password when prompted.

Save the exported file somewhere safe.

Send the file to Gallagher Sales. Do not send the password with the file.

Revert to Gallagher Default keys
Now that the keys are safely stored, revert to the Default keys that the cards were encoded with.
Click Set To Default and confirm the warning dialog with Yes.
Click Apply and confirm the second warning dialog with Yes.
The system enters migration mode. Since no cards have been issued under the SSK yet, click Manage Card Migration, then Stop Migration.
Confirm the warning with Yes, then OK, then click Apply.

The system is now running Default keys, and the pre-encoded cards can be read by any configured T-series HBUS reader.
Re-import the SSK and roll keys on cards
Re-import the SSK you saved, so the system can roll the keys on the cards.
Click Import Keys… and select the previously saved key file.
Enter the strong password and click OK, then confirm the warning dialog with Yes.


Confirm the Default Application Key warning dialog with Yes.

Present each card to a configured reader, one at a time. Cards give Access Denied if they are not assigned access, but the key rolling still happens on presentation.
Once all the cards have been migrated, click Manage Card Migration and select Stop Migration. Confirm the warning with Yes, then OK.

Confirm the migration
Click Apply. All cards are now migrated from the Gallagher Default keys to the SSK.
🔗 Related
Credentials - Site Specific Key (SSK) vs Default Site Key. What to do when the site has already issued cards under its SSK.
Credentials - SSK Migration and the 2 Modes. Choosing between an all-readers migration and a choke-point migration.
Credentials - Fault Finding Cards with Site Specific Keys. Confirming that the single beep really is a key mismatch.
Last updated
Was this helpful?
