Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Network ports

Reference Controller 7000 network ports, protocols, traffic direction, and TLS support.

This page answers

  • Which ports does a Gallagher controller use?

  • Which direction is each port, and what is it for?

  • Which versions of TLS are supported?

The ports used by Gallagher controllers for network communication.

These ports also apply to Controller 7000 SDC.


Port table

Port
Protocol
Direction
Purpose

80*

TCP

Inbound

Gallagher Technical Support Diagnostics using HTTP

137‡

UDP

Inbound

Browsing requests of NetBIOS over TCP/IP

138‡

UDP

Inbound

Browsing datagram responses of NetBIOS over TCP/IP

1072

TCP

Inbound

Inbound communication with Gallagher Command Centre Server and other Gallagher Controller devices using encrypted proprietary Bertbus Protocol

Assigned by TCP stack

TCP

Outbound

IP Alarms transmission using DC09 protocol (if configured)

Assigned by TCP stack

TCP

Outbound

Outbound communication with Gallagher Command Centre Server and other Gallagher Controller devices using encrypted proprietary Bertbus Protocol

* Port 80 is open only when DIP Switch 1 is ON. ‡ Ports 137 and 138 are open only when DIP Switch 6 is OFF.


TLS support

A Gallagher controller running a supported version of Command Centre supports TLS 1.2 and TLS 1.3 connectivity, as long as the server it is connected to also supports the protocol.


Notes

  • Port 1072 is the primary communication port for all controller-to-server and controller-to-controller traffic.

  • From CC version 8.50 onwards, the controller initiates the outbound TCP connection to the server. The server does not initiate connections to the controller.

  • The Bertbus Protocol on port 1072 is encrypted (AES 256-bit).

  • If another application is using port 1072, the FT Controller Service will fail to bind and controllers will not come online. See Firewall Issues and Bringing Online and Networking for diagnosis.


🔗 Related

Last updated

Was this helpful?