For the complete documentation index, see llms.txt. This page is also available as Markdown.

Life Safety Power

🌍 North America only. The Life Safety product is specifically for the North American region. Different regulations require a different product line. They should not be specified for AU, NZ, EU, UK or APAC sites.

Overview

Gallagher provides Life Safety Power (LSP) UL compliant powered cabinets in high grade steel locking enclosures with two standard configurations. Each cabinet comes pre- installed with power supply and distribution modules.

Life Safety Cabinets

Agency Listed for security applications, these cabinets include:

  • High grade steel design with lock and key

  • Pre-installed power supply and distribution modules

  • Optional back plates and brackets specifically designed for Gallagher equipment

  • Ample ½” and 1¼” knockouts

  • Removable door for easier servicing

  • 4.5” depth cabinets to fit 12Ah batteries

Life Safety cabinet range

Some of the Life Safety cabinets have plates fitted to them, or supplied with them, to facilitate the installation of Controller 6000 controllers.

🧑‍🔧 Installer note: the plates need to be mounted with the writing the wrong way up for the controllers to correctly mount. The image below is not upside down.

Life Safety mounting plates

Typically the cabinet's backplane is configured to have the holes pre-drilled for the Controller 6000 to be mounted directly to it.

Life Safety pre-drilled backplane

Life Safety documents

Reference datasheets for the pre-assembled cabinets available from the Gallagher american team.

Gallagher LSP Power Supplies

LSP power supplies are a power supply battery charger specifically designed for the security industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space.

Model
Power
Voltage Selection
Used in cabinet

FP075

75 W

6 A / 12 V or 3 A / 24 V

LSP E2 Cabinet

FP0150

150 W

12 A / 12 V or 6 A / 24 V

LSP E4 Cabinet

Both are for North, Central and South American customers.

FP075 75 Watt PSU

This is found in the LSP E2 Cabinet, for North, Central and South American customers. It allows for 6 A / 12 V or 3 A / 24 V supply.

FP075 75 W PSU

FP0150 150 Watt PSU

This is found in the LSP E4 Cabinet, for North, Central and South American customers. It allows for 12 A / 12 V or 6 A / 24 V supply.

FP0150 150 W PSU

Secondary modules

B100 Voltage regulator

The B100 allows a second voltage to be available on the Life Safety power supply system. By default it is set to 12 V.

By moving the jumper and adjusting the potentiometer, you can select from 5 V to 18 V.

We recommend setting this output to 13.6 V when using Gallagher equipment, because the Gallagher hardware expects about 13.6 V, matching the 8 A and 3.5 A Gallagher PSU rails.

When using the B100 with Life Safety power supplies, the recommendation is to set the power supply to 24 V. The B100 then steps that down to 13.6 V.

D8 Power Distribution Panel

The D8 is a power distribution panel for selecting the desired voltage for downstream systems.

  • The LEDs indicate the voltage selected: Blue is 24 V, Green is 12 V.

  • Each output is fused with a 3 A fuse.

M8 Managed Output Module

This module allows extension of up to 8 outputs, with switching between 12 V and 24 V and voltage / current monitoring via the NL4 or NLX network module.

C8 Unmanaged Output Module

This is an unmonitored version of the M8 panel. Use it where voltage and current monitoring is not required.


🔗 Related

Last updated

Was this helpful?