> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-monitoring/alarm-input-test-modes/configuring-access-groups-for-test-modes.md).

# Configuring Access Groups for Test Modes

### Introduction

This procedure describes how to configure the Access Groups you require for testing.

It is possible to configure groups of staff members with the Alarm Zones they are allowed to disarm and the times they can disarm them for.

It is also possible to configure groups of staff members with the period of time they are allowed to disarm the Alarm Zones for.

### Procedure

1. Ensure the following information has already been set up:

   *Divisions*

   Refer to "[Setting up System Division](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/system-division/setting-up-system-divisions.md)".

   *Cardholders*

   Refer to "[Add New Cardholder](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/cardholders/adding-a-new-cardholder.md)".

   *Schedules*

   Access Schedules = relating to cardholders

   Access Zone Schedules = relating to how the doors within the zone behave

   Refer to "[Schedule](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/schedules.md)".

   *Access zones*

   Includes a linked Access Zone Schedule

   Refer to "[Adding a new Access Zone](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/access-zones/adding-a-new-access-zone.md)".

   *Personal Data Fields*

   Refer to "[Creating a new Personal Data Field](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/personal-data-fields/creating-a-new-personal-data-field.md)".
2. Click **Manage** from the menu bar, then **Access Groups**.

   The **Access Group** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/tree-view.md)).
3. **Right click** on the appropriate Access Group and select **Properties**.
4. Click the **Cardholder Membership** tab.
5. Click **Manage** from the menu bar, then **Cardholders**.

   The **Cardholder** List Window opens.
6. Select the Cardholders who are required to perform input tests.

   Drag and drop them into the **Cardholder Membership** tab.
7. Close the **Cardholder** List Window.
8. Click the **Privileges** tab.
9. Check the **Change to the Disarmed state** checkbox.
10. If Cardholders are required to arm Alarm Zones associated with any Access Zone associated with this Access Group, check the **Change to the Armed state** checkbox.
11. If Cardholders are required to select an Alarm Zone to test on the terminal, check the **Prompt for alarm zone selection** checkbox.
12. Click the **Terminal Access** tab.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-a7302a7fe4224e5fff9b68ad76e3dae5dba3e052%2Faccessgroup_terminalaccesstab.png?alt=media)
13. Select the appropriate **Cardholder Access Schedule** for this Access Group.

    This schedule will control when the Cardholder can access the terminal.
14. Check the **Override Alarm Zone unset time** checkbox and enter the period of time you require the Alarm Zones to be unset. (Default = 60 minutes)

    This time will override the Alarm Zone unset time for all Alarm Zones associated with this Access Group, when unset from the terminal only.

    **Note:** If an Alarm Zone unset time is greater than the configured override unset time, the Alarm Zone will be reset at the time specified by the override.
15. Check the **User can initiate input test mode** checkbox.

    Cardholders belonging to this Access Group will able to perform input tests.
16. Click the **Alarm Zones** tab.
17. Click **Configure** from the menu bar, then **Alarm Zones**.

    the **Alarm Zone** List Window opens.
18. Select the Alarm Zones that the members of this Access Group are authorised to test.

    Drag and drop them into the **Alarm Zones** tab window.
19. Close the **Alarm Zone** List Window.
20. Click the **OK** button to exit and save your changes.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-monitoring/alarm-input-test-modes/configuring-access-groups-for-test-modes.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
