> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/reports/creating-a-new-report/wiring-report.md).

# Wiring Report

### Introduction

The Wiring Report allows the operator to create a new report, or set of reports, which can be run after hardware has been configured in Command Centre. The report provides documentation which tells the installer how the hardware must be wired. Ideally installers will run this at the end of running a wizard to configure the hardware.

Operators require the "View Site" and "Edit Report Descriptions" operator privileges to create, save, edit and delete Wiring Reports.

The items that can be reported on are listed below:

<table><thead><tr><th width="201.22222900390625">Controller 6000s</th><th></th></tr></thead><tbody><tr><td>HBUS Devices:</td><td>HBUS F31/F32/F41/F42 Fence Controller<br>HBUS F22 Fence Controller<br>HBUS Z10 Tension Sensor Group<br>HBUS I/O</td></tr><tr><td>Other:</td><td>Doors<br>Elevator Car</td></tr></tbody></table>

***

### Report Wizard

The Wiring Report wizard contains only two pages which enable you to create a report.

**Follow the instructions displayed**.

<details>

<summary>'Device Selection' page</summary>

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e6f1904fe902b2b538906364dc333e0073c81e4b%2Fwiringreport.png?alt=media)

This page provides a list of all the items that an operator may include in the report. Drag and drop those items you require from the **Available Items** list, to the **Selected Items** column on the right.

**Note:** As long as the **Selected Items** list on the right remains empty, the **Next** button will be disabled.

Should you wish to remove an item from the **Selected Items** list, **right click** on the item and click **Remove from List**.

</details>

<details>

<summary>Report Generation and Saving page</summary>

This wizard page is the same for all report types, and provides the same options. Refer to [Report Generation and Saving](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/reports/creating-a-new-report.md) in the *Creating a new report* procedure for further detail.

</details>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/reports/creating-a-new-report/wiring-report.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
