> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges/which-operator-privileges-you-require/monitor.md).

# Monitor

### Acknowledge Alarms

An operator with the "Acknowledge Alarms" privilege in a division can perform the following actions on a single alarm:

* Acknowledge and edit properties of alarms whose source is any Command Centre item within that division. This includes adding a Note or Comment to the alarm.
* View events and alarms whose source is a Command Centre item within that division.
* View an image sequence in that division.
* Refresh alarms from a Controller in that division, but only with "View Site" privilege in that division as well.
* Add, delete, edit properties of, or run an Activity or Exception report description in that division. If the report contains items to which the operator does not have "View" privilege they are excluded from the report.
* View the properties of an Evacuation Report in that division, or run an Evacuation report description in that division.

### Adjust DVR PTZ controls

An operator with "Adjust DVR PTZ controls" privilege in a division can alter the pan, tilt or zoom (or other controls as provided by the DVR integrator) of a DVR camera in that division, while watching live image sequences from that DVR Camera.

### Bulk Process Alarms

An operator with "Bulk Process Alarms" privilege in one or more divisions can perform the following:

* Bulk process all inactive alarms within an alarm priority group. This processes all the alarms, not just those in the division in which the privilege is held.

**Notes:**

* "Edit alarms" privilege in a division is also needed to bulk process alarms whose source is an item from that division.
* For escalated alarms, the operator must also belong to an Operator Group which allows them to acknowledge or process escalated alarms (configured via the Operator Group properties, **Configuration** tab).

### Controlled Challenge

An operator with "Controlled Challenge" privilege can open the Challenge Viewer in "Controlled" mode, and grant or deny access to cardholders entering via any Door in that division. The operator must also have "View Events & Alarms" privilege in the Door's division, to operate the Challenge Viewer, and "View Digital Camera" privilege if using DVR cameras.

### Edit Alarms

An operator with "Edit Alarms" privilege in a division can perform the following:

* Acknowledge, edit properties of, and process alarms whose source is any Command Centre item within that division.
* View events and alarms whose source is an Command Centre item within that division.
* View an image sequence in that division.
* Add, delete, edit properties of, or run an Activity report description in that division. If the report contains items to which the operator does not have "View" privilege they are excluded from the report.
* Add, delete, edit properties of, or run an Exception report description in that division. If the report contains items to which the operator does not have "View" privilege they are excluded from the report.
* View the properties of an Evacuation report description in that division, or run an Evacuation report description in that division.

  **Note:** This is the only report that includes all Access Zones configured in the report description, regardless of the (generating) operator's privileges (or lack of them) to these Access Zones.
* "Quick process" an alarm whose source is any Command Centre item within that division.

### Edit Alarms Below High Priority

An operator with "Edit Alarms Below High Priority" privilege can only acknowledge and process alarms of the following priorities:

* Medium High,
* Medium,
* Medium Low,
* Low, and
* Very Low

### Force Process

An operator with "Force Process" privilege in a division, and "View Site" and "Edit Alarms", can force process active alarms.

### Launch Configuration Client

An operator with the "Launch Configuration Client" privilege in any one or more divisions can perform the following:

* Login to the Configuration Client through CCFT.exe
* See the **Configuration Client** button on the Administration tab of the Command Centre Client.
* Click the **Configuration Client** button once to launch the Configuration Client from this icon.

### Record live DVR stream

An operator with "Record live DVR stream" privilege in a division can record the live DVR image sequences, while watching them from a DVR Camera in that division.

### Use Intercom

An operator with "Use Intercom" privilege in a division can perform the following:

**Note:** The operator also needs "View Site" in the Intercom's division, to view the Intercom Command Centre item, and "View Events & Alarms" in the Intercom's division to receive a call from the Intercom.

* Place a call to an Intercom in that division.
* Answer a call or end a call from an Intercom in that division.
* Place a call on hold or forward a call from an Intercom in that division.

### View Cardholder Events (API Only)

This privilege is only applicable to operators used as a REST Client Operator for a REST Client item. A REST Client Operator with "View Cardholder Events (API Only)" privilege can view Cardholder events (e.g. Door Access Granted) via the REST API. This can allow a REST client to monitor Cardholders' movements without being able to view non-Cardholder events.

### View Challenge

An operator with "View Challenge" privilege in a division can perform the following:

* Open the Challenge Viewer in "View only" mode and operate the Challenge Viewer for any Doors in that division.
* View the properties of all Doors in that division.
* The operator must also have "View Events & Alarms" privilege in the Door's division, to operate the Challenge Viewer.

### View Digital Camera

An operator with "View Digital Camera" privilege for a Digital Camera's or DVR Camera's division can view the properties of that Camera.

### View Events and Alarms

An operator with "View events and alarms" privilege in a division can perform the following:

* View events and alarms whose source is an Command Centre item within that division.
* View an image sequence in that division.
* Refresh alarms from a Controller (all types) in that division, but only with "View Site" privilege in that division as well.
* Add, delete, edit properties of, or run an Activity report description in that division. If the report contains items to which the operator does not have "View" privilege they are excluded from the report.
* Add, delete, view and edit properties of, or run an Exception report description in that division. If the report contains alarms whose source is an Command Centre item in a division which the operator does not have "View Events and Alarms" privilege within, they are excluded from the report.
* View the properties of an Evacuation report in that division, or run an Evacuation Report description in that division.
* See Alarm Viewers stored in that division which have been configured for use in the Command Centre Client.

### View Guard Tours

An operator with "View Guard Tours" privilege in a division can view the properties of Guard Tours in that division, including the list of checkpoints that are configured for the Tour.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges/which-operator-privileges-you-require/monitor.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
