> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges/which-operator-privileges-you-require/configure.md).

# Configure

### Configure Access Report

An operator with "Configure Access Report" privilege in a division can save or delete any Access Report in the Command Centre Client, for the Report's Division, but only if the operator also has the privilege to view reports.

### Configure Broadcast Notifications

An operator on a site with 'Notifications' included in the license file, and the "Configure Broadcast Notifications" privilege in a division, can view, save, edit and delete Broadcast Notification items in the Command Centre Client.

### Configure Cardholder and Activity Report

An operator with "Configure Cardholder and Activity Report" privilege in a division can save or delete any Cardholder and Activity Report in the Command Centre Client, for the Report's Division, but only if the operator also has the privilege to view reports.

### Configure Evacuation Report

An operator with "Configure Evacuation Report" privilege in a division can perform the following in the Command Centre Client:

* Create a new Evacuation Report in that division.
* Delete an Evacuation Report in that division.
* Edit the properties of an Evacuation Report in that division.

**Note**: To view the properties of and/or run an existing saved Evacuation Report, an operator must have the "View Events and Alarms" operator privilege in the Evacuation Report's division. Having different privileges for creating and running Evacuation Reports ensures that operators who are able to run and print pre-configured Evacuation Reports (when there is an emergency), are prevented from changing their configuration.

### Configure Site

An operator with "Configure Site" privilege in a division can add or remove Command Centre items or view and edit their properties, (i.e. use the "New", "Delete", "Properties" context menu options), for all Command Centre items within that division and of the following types:

* Archives
* CardType, including editing Card Layout
* Universal Card Format
* Division
* Day Category \*
* Calendar
* Special Calendar
* Morpho Biometric Type
* Competencies
* Notification Filter

\* Day Categories are divisionless, so having "Configure Site" in any Division allows an operator to configure any Day Category.

*Exclusions:*

The following actions, previously included under this privilege, are explicitly excluded from this privilege and require the "Edit Site" privilege to perform:

* FTP Stop
* FTP Start
* Resync Databases

### Configure Time Report

An operator with "Configure Time Report" privilege in a Division can save or delete any Time Report in the Command Centre Client, for the Report's Division, but only if the operator also has the privilege to view reports.

### Configure Viewers

An operator with the "Configure Viewers" privilege in a Division can create, edit the configuration of and delete Viewers in that Division, in the Command Centre Client.

**Note:** This privilege does not automatically grant any other privilege which means the Operator will need additional privileges to be able to see the items (including Cardholders) to include in the configuration.

### Configure Voltage Report

An operator with the "Configure Voltage Report" privilege in a Division can save or delete any Voltage Report in the Command Centre Client, for the Report's Division, but only if the operator also has the privilege to view reports.

### Configure Workstation Routing

An operator with the "Configure Workstation Routing" privilege in a Division can create, edit and delete Workstation Routing items in that Division, in the Command Centre Client.

### Delegate API Activity

When a REST Client Operator (an operator assigned to a REST Client item) is assigned the "Delegate API Activity" privilege, the REST Client can delegate its overrides to a specific Cardholder (e.g. the one who performed the override). This Cardholder must belong to a Division assigned to the 'Divisions' tab of the REST Client Operator's Operator Group. Without the 'Delegate API Activity' privilege assigned, all actions simply appear to be performed by the 'REST Client Operator', who may not represent an actual person.

A parameter in the REST query is used to specify the Cardholder that the REST override is delegated to. In the override event details, this Cardholder appears to have requested the override. This parameter will not work if the 'Delegate API Activity' Operator Privilege is not assigned to the Operator Group of the REST Client Operator. For more information about using this REST query parameter, refer to the developer documentation and sample code stored at: <https://gallaghersecurity.github.io/>.

### Delete Workflows

An operator with "Delete Workflows" privilege in a division can view and delete all Workforce Manager Workflows and Rules in that division, and delete all versions of those Workflows and Rules.

### Edit Alarm Configuration

An operator with "Edit Alarm Configuration" privilege in a Division can perform the following:

* Create or delete Action Plans in that division.
* View and modify the properties of Action Plans in that division.
* Create or delete Insertion Tags in that division.
* View and modify the properties of Insertion Tags in that division.
* Create or delete Alarm Instructions in that division.
* View and modify the properties of Alarm Instructions in that division.

### Edit Card State Sets

An operator with the "Edit Card State Sets" privilege in a Division can can create, edit and delete Card State Sets in that Division, in the Command Centre Client.

**Note:** Operators must have this privilege in at least one Division in order to see the Card States icon on the **Administration** Toolbar in the Command Centre Client.

### Edit Card Types

An operator with the "Edit Card Types" privilege in a division can perform the following:

* Edit the properties of Card Types in that division, except the properties that are non-editable.
* Add or delete Card Types in that division.
* Edit Card Layouts in that division.

### Edit Cardholder Notification

An operator with the "Edit Cardholder Notification" privilege in a division can perform the following:

* Enable/disable notifications on the **Event Notifications** tab of a cardholder record.
* Change the Notification Method assigned to each Notification Filter on the **Event Notifications** tab of a cardholder record.
* Change the calendar assigned to a cardholder to either the default calendar or a specific special calendar.
* The following functions require an additional privilege as well as the "Edit Cardholder Notification" privilege:

  <table><thead><tr><th width="282">To be able to...</th><th>an operator must also have the...</th></tr></thead><tbody><tr><td>add or remove a Filter from a cardholder,</td><td>"View Site" privilege in the Notification Filter's division.</td></tr><tr><td>add a schedule to a cardholder's Notifications page,</td><td>"View Schedules" privilege in the Schedule's division.</td></tr><tr><td>update Cardholder tabs other than the <strong>Event Notification</strong> tab,</td><td>appropriate cardholder privilege, (e.g. "Edit Cardholder", "Delete Cardholder", "Edit Cardholder Notes").</td></tr></tbody></table>

The "Edit Cardholder Notification" privilege inherently receives the privilege of "View Cardholders".

### Edit Competency Definitions

An operator with the "Edit Competency Definitions" privilege in a division can perform the following:

* Add or delete a competency in that division.
* View or modify a competency in that division.

### Edit Divisions

An operator with the "Edit Divisions" privilege can perform the following:

* Add or delete a division.
* View or modify a division.

### Edit Enrolment Templates

An operator with "Edit Enrolment Templates" privilege in a division can perform the following:

* Create an Enrolment Template in that division.
* Delete an Enrolment Template in that division.
* View the properties of Enrolment Templates in that division.
* Edit the properties of Enrolment Templates in that division.

**Note:** Some Enrolment Template properties will require additional privileges to configure, (i.e. "View Site" is needed in the Card Type's division to select the Card Type, and "View Personal Data Definitions" is needed in a PDF's division to select that PDF within the Enrolment Template).

### Edit Enterprise Data Interfaces

An operator with the "Edit Enterprise Data Interfaces" privilege can perform the following:

* Create an Enterprise Data Interface (EDI)
* Save an EDI
* Edit an EDI
* Run an EDI
* Enable/disable an EDI.

### Edit Evacuation Report

An operator with "Edit Evacuation Report" privilege in a division can edit the properties of an Evacuation Report in that division, in the Configuration Client.

**Note:** To view the properties of and/or run an existing saved Evacuation Report, an operator must have the "View Events and Alarms" operator privilege in the Evacuation Report's division. Having different privileges for creating and running Evacuation Reports ensures that operators who are able to run and print pre-configured Evacuation Reports (when there is an emergency), are prevented from changing their configuration.

### Edit Guard Tours

An operator with "Edit Guard Tours" privilege in a division can perform the following:

* Edit the properties of Guard Tours in that division, including the list of checkpoints that are configured for the tour.
* Add or delete Guard Tours in that division.

### Edit Icon Sets

An operator with "Edit Icon Sets" privilege can perform the following:

* Add or delete an Icon Set in ANY division.
* View and modify the properties of any Icon Set in ANY division.

**Note:** Icon sets are divisionless, hence this privilege applies system-wide.

### Edit Lockers

An operator with "Edit Lockers" privilege in a division can create, edit and delete Lockers and Locker Banks.

### Edit Macros

An operator with "Edit Macros" privilege in a division can perform the following:

* View and edit the properties of Macros in that division (with the exception of the Macro's schedule).
* Add or delete Macros in that division (with the exception of the Macro's schedule).
* Duplicate a Macro in that division (with the exception of the Macro's schedule).

### Edit Operators

An operator with "Edit Operators" privilege in a division can perform the following:

* View all Operator Privileges (their name and description).
* View and edit the properties of Operator Groups in that division (including adding any privileges to those Operator Groups, providing the operator has "Edit Operators" privilege in each division to which those privileges will apply).
* Add or delete Operator Groups in that division.
* View the **Operator Configuration** tab on a cardholder's properties for cardholders in that division, if the operator also has "View Cardholders" privilege in that division.

View and edit the **Operator Configuration** tab on a cardholder's properties for cardholders in that division, if the operator also has "Edit Cardholders" privilege in that division.

* Add or delete Service Principals in that division, and view and edit all properties of Service Principals in that division.

### Edit Personal Data Definitions

An operator with "Edit Personal Data Definitions" privilege in a division can perform the following:

* Add or delete Personal Data Fields in that division.
* View or modify the properties of Personal Data Field definitions in that division.

### Edit Report Descriptions

An operator with "Edit Report Descriptions" privilege in a division can save or delete any type of Report Description (with the exception of the Evacuation Report) in the Configuration Client, for the Report Description's Division, but only if the operator also has the privilege to view reports.

**Note:** This applies to all reports except for the Evacuation Report which is controlled by the "Edit Evacuation Report" operator privilege.

### Edit Role Definitions

An operator with "Edit Role Definitions" privilege in a division can perform the following:

* View and edit the properties of Roles in that division.
* Add or delete Roles in that division.

### Edit Salto Items

An operator with "Edit Salto Items" privilege in a division can perform the following:

* Delete or change names, descriptions and door-zone relationships of Salto Doors and Zones.
* Re-synchronise with the Salto application.

**Note:** Names, descriptions or door-zone relationships of Rooms, Lockers or Suites cannot be deleted or changed. These are changed only through a re-sync, and then only from the Salto side.

### Edit Schedules

An operator with "Edit Schedules" privilege in a division can perform the following:

* View and edit the properties of Schedules in that division.
* Add or delete Schedules in that division.
* Duplicate Schedules.

### Edit Site

An operator with "Edit Site" privilege in the root division can edit the list of reasons for printing or encoding a card.

An operator with "Edit Site" privilege in a division can perform the following:

* Create and delete workstations.
* View the Status Viewer.
* View icon sets and change the icons on Command Centre items.
* View and edit the properties of any of the following Command Centre items in that division, (i.e. can use the **Properties** context menu option in the appropriate List Window).
* Add or remove any of the following Command Centre items in that division, with the exception of the Server, (i.e. can use the **New** or **Delete** context menu options in the appropriate List Window).
* See any Command Centre Client Monitor Site Viewers in that division.
* View Notification Filters and competencies, but not create them.
* Use the "Identify device" override.

{% columns %}
{% column %}
**Hardware Controllers:**\
\- Controller 6000 or 7000

**Hardware - HBUS:**\
\- HBUS Reader\
\- HBUS Terminal\
\- HBUS Alarms Only Terminal\
\- HBUS F31/F32/F41/F42 Fence Controller\
\- HBUS F22 Fence Controller\
\- HBUS I/O Interface\
\- HBUS Z10 Tension Sensor Group

**Hardware - Sensor:**\
\- D10 Taut Wire Sensor\
\- Z20 Disturbance Sensor

**Hardware - Aperio:**\
\- Aperio Door

**Hardware - Other:**\
\- Input\
\- Output (virtual or physical)\
\- Third Party Reader\
\- Morpho Biometric Reader (Third Party Reader)\
\- Alarm Dialler\
\- Elevator HLI\
\- DVR System\
\- DVR Camera
{% endcolumn %}

{% column %}
**Device software:**\
\- Controller Software\
\- RIO Software\
\- Controller Customisation Software

**Other items:**\
\- Server \*\*\
\- Workstation\
\- Access Zone\
\- Alarm Zone\
\- Door\
\- Site Plan\
\- Elevator Car\
\- Salto Server\*\*\
\- Salto Access Zone\
\- Elevator Car HLI\
\- Intercom\
\- Intercom System\
\- Interlock Group\
\- External System\
\- External System Item\
\- Logic Block\
\- Salto Door\
\- Receptions\
\- IP Alarm Transmitter
{% endcolumn %}
{% endcolumns %}

\*\* This item CANNOT be added or removed with the "Edit Site" privilege.

An operator with "Edit Site" privilege in a division can view and edit the properties of any of the following Services and Workstations items, in that division, as well as deleting the Services and Workstations items ( **Services and Workstations item** > **Delete** or, > **Properties** ).

* FT Controller Service
* FT Import-Export Service
* FT Bootstrap Protocol Service
* FT Intercom Service

An operator with "Edit Site" privilege in a division can perform the following:

* Re-synchronise databases between the Server and any Controller in that division.
* Re-synchronise databases between the Server and any Morpho Biometric Reader in that division.
* Re-synchronise with the Salto application.
* Accept a new certificate for a remote server.
* Create a new Elevator Car in that division by duplicating (or copying) the properties of another Elevator Car (to which the operator also has "Edit Site" privilege).
* Create a new Elevator Car HLI in that division by duplicating (or copying) the properties of another Elevator Car HLI (to which the operator also has "Edit Site" privilege).
* Create a new External System in that divsion by duplicating (or copying) the properties of another External System (to which the operator also has "Edit Site" privilege).
* Create a new External System Item in that division by duplicating (or copying) the properties of another External System Item (to which the operator also has "Edit Site" privilege).

An operator with "Edit Site" privilege in a division can push the configuration of that item to the Controller that hosts the item for any of the following Command Centre items in that division (Context menu option is **Command Centre item** > **Push Configuration**):

{% columns %}
{% column %}
Controller 6000 or 7000

HBUS F31/F32/F41/F42 Fence Controller

Elevator Car

Output

DVR Camera

Alarm Dialler

HBUS Reader

HBUS F22 Fence Controller
{% endcolumn %}

{% column %}
Door

External System

Fence Zone

Cardax IV Reader

HBUS Terminal

Elevator HLI

Interlock Group

External System Item
{% endcolumn %}

{% column %}
Access Zone

HBUS I/O Interface

HBUS Alarms Only Terminal

Elevator Car HLI

Input

DVR System

Alarm Zone

Third Party Reader
{% endcolumn %}
{% endcolumns %}

**Site Configuration Report:**

An operator with "Edit Site" privilege in a division can add, delete, generate, view and modify the properties of a Site Configuration Report description in that division. When run, the Site Configuration Report will only report the properties for Command Centre items to which the operator has "View" privilege.

**Contact ID Report:**

An operator with "Edit Site" privilege in a division can add, delete, generate, view and modify the properties of a Contact ID Report description in that division. The Contact ID Report will only include those Command Centre items to which the operator has "View" privilege.

**Access Report:**

An operator with "Edit Site" privilege in a division can add, delete, generate, view and modify the properties of an Access Report description (Summary or Detailed) in that division. The following rules apply:

* When the Access Report is run, it will only report on those Access Zones or Salto Access Zones to which the operator has "View Site" privilege.
* If a Door rather than an Access Zone is configured in the report description, then the Access Zone that the Door provides entry to, is the effective Access Zone that is reported on. The same does not apply for Salto Doors, as these may be reported on directly.

**Detailed Access Report:**

If the operator has the privilege to view properties of an Access Zone, Salto Access Zone or Salto Door included in the report then all cardholders which have access to that item (their name only) at the time configured in the report description (or for the configured day category) will be displayed in the Detailed Access Report. This applies regardless of the operator's privileges, or lack of them, to that cardholder.

The content of a PDF is only displayed in the Detailed Access Report, for each cardholder, if the operator has privilege to view the content of that PDF for that cardholder.

The cardholder's card number is only displayed in the Detailed Access Report, if the operator has "View cardholder" privilege for that cardholder.

**Summary Access Report:**

When the Summary Access Report is run, it displays the names of any Access Groups, and other information about that Access Group, for any Access Groups that provide access to that item at the time configured in the report description (or for the configured day category). This applies regardless of the operator's privileges, or lack of them, to these Access Groups.

**Fence Voltage Report:**

An operator with "Edit Site" privilege in a division can add, delete, generate, view and modify the properties of a Fence Voltage Report description in that division. The Fence Voltage Report must only include those Command Centre items to which the operator has "View" privilege.

### Edit Visits

An operator with "Edit Visits" privilege can perform the following in the Visitor Management system:

* Create and edit visits, including adding and removing visitors from the visit.
* Perform any of the actions, all of which update the status of the visitor for the visit and maintain a record of the actions performed.
* To send an arrival or general notification.

### Edit Workflows

An operator with "Edit Workflows" privilege in a division can perform the following:

* View and edit all Workforce Manager Workflows and Rules in that division.
* View and edit all versions of all Workforce Manager Workflows and Rules in that division, including their diagrams.
* Add Workforce Manager Workflows and Rules in that division.
* Add new versions of Workforce Manager Workflows and Rules in that division.

An operator cannot delete Workflows, Rules, or Workflow and Rule versions in a division unless they have the Delete Workflows privilege in that division.

### Enable/disable Operator

An operator with "Enable/disable Operator" privilege in a division can enable and disable the Command Centre Logon for operators via either:

* the Operator Configuration tab of the Cardholder properties in the Configuration Client, OR
* the Logon Details button on the Cardholder Operator Groups tile of the Cardholder Viewer in the Command Centre Client.

### Evaluate Cardholder Management Workflows

An operator with "Evaluate Cardholder Management Workflows" privilege in a division can perform the following:

* View and run all Published versions of Workforce Manager Work-flows in that division, only in the Cardholder Workflow Evaluator tile, for all Cardholders they can view.
* See a detailed overview of how those Workflows have run for all Cardholders they can view.

### Evaluate Test Cardholder Management Workflows

An operator with "Evaluate Test Cardholder Management Workflows" privilege in a division can perform the following:

* View and run all Test versions of Workforce Manager Workflows in that division, only in the Cardholder Workflow Evaluator tile, for all Cardholders they can view.
* See a detailed overview of how those Workflows have run for all Cardholders they can view.

### Manage Data Retention Settings

An operator with "Manage Data Retention Settings" privilege can manage settings related to data retention policy and redaction of cardholder’s personal identifiable information.

### Manage Keys

An operator with "Manage Keys" privilege in the Root Division can perform the following operations:

* Change/import/export site keys
* Start/stop migration
* Encode admin cards
* Change/import/export Morpho biometric type keys
* Change Salto keyset and Configure Encryption Override

The above operations will not be available to any operator who does not have the "Manage Keys" privilege or equivalent, (i.e. "Advanced User" in the same division, or System Operator).

### Manage Locker Assignments

An operator with "Manage Locker Assignments" privilege in a division can manually assign (allocate), modify and/or remove Lockers from Cardholders.

**Note:** It does not include "View Cardholder" privilege however. "View Cardholder" privilege is not required to see existing Locker assignments in the Locker Viewer.

### Modify Operator Group Membership

An operator with "Modify Operator Group Membership" privilege (but without the "Edit Operators" privilege) will be able to add and remove Cardholders and Service Principals from Operator Groups, but will not be able to edit the Operator Group, Cardholder or Service Principal in any other way.

### Run Bulk Random Selection

An operator with "Run Bulk Random Selection" privilege in a division can run Bulk Random Selection items in that Division. The operator can modify the ‘Cardholder Probability of Selection’ and ‘Per-Run Total Cardholder Selection Limit’ settings when they run a Bulk Random Selection, but these modifications are applied to that run only and not saved to configuration.

### Schedule Access Zone

An operator with "Schedule Access Zone" privilege in a division can change a Schedule on an Access Zone to another which has already been created.

### Select System View

An operator with "Select System View" privilege within any division, is able to restrict their system view within Command Centre to one or more of the Operator Groups to which they belong.

This makes the **Select System View** selection dialog available to them.

### View Alarm Configuration

An operator with "View Alarm Configuration" privilege in a division can perform the following:

* View the properties of Action Plans in that division.
* View the properties of Insertion Tags in that division.
* View the properties of Alarm Instructions in that division.

### View Lockers and Assignments

An operator with "View Lockers and Assignments" privilege in a division can view Lockers, Locker Banks and Locker assignments.

### View Operators

An operator with "View Operators" privilege in a division can perform the following:

* View all Operator Privileges (Name and Description).
* View the properties of Operator Groups in that division.
* View the **Operator Configuration** tab on a cardholder's properties for cardholders in that division, but only if the operator also has "View Cardholders" or "Edit Cardholders" privilege in that division.
* View the properties of Service Principals in that division.

### View Personal Data Definitions

An operator with "View Personal Data Definitions" privilege in a division can view the properties of Personal Data Fields in that division.

### View Schedules

An operator with "View Schedules" privilege in a division can view the properties of Schedules in that division.

### View Site

An operator with "View Site" privilege in a division can view the properties of any of the following Command Centre items in that division, (i.e. use the **Properties** context menu option for the appropriate Command Centre item).

{% columns %}
{% column %}
**Hardware Controllers:**\
\- Controller 6000 or 7000

**Hardware - HBUS:**\
\- HBUS Reader\
\- HBUS Terminal\
\- HBUS Alarms Only Terminal\
\- HBUS F31/F32/F41/F42 Fence Controller\
\- HBUS F22 Fence Controller\
\- HBUS I/O Interface\
\- HBUS Z10 Tension Sensor Group

**Hardware - Sensor:**\
\- D10 Taut Wire Sensor\
\- Z20 Disturbance Sensor

**Hardware - Aperio:**\
\- Aperio Door

**Hardware - Other:**\
\- Input\
\- Output (virtual or physical)\
\- Third Party Reader\
\- Morpho Biometric Reader (Third Party Reader)\
\- Alarm Dialler\
\- Elevator HLI\
\- DVR System\
\- DVR Camera
{% endcolumn %}

{% column %}
**Other items:** (these items edited with "Configure Site", "Edit Icon Sets" or "Edit Macros")\
\- Archive\
\- Calendar\
\- Special Calendar\
\- Card Type\
\- Day Category \*\
\- Division\
\- Universal Card Formats\
\- Notification Filters\
\- Macro\
\- Icon Sets \*

**Other items:** (these items edited with "Edit Site")\
\- Server \*\*\
\- Workstation\
\- Access Zone\
\- Alarm Zone\
\- Door\
\- Site Plan\
\- Elevator Car\
\- Elevator Car HLI\
\- Intercom\
\- Receptions\
\- Interlock Group\
\- External System\
\- External System Item\
\- Fence Controller\
\- Fence Zone\
\- Salto Server\*\*\
\- Salto Door\
\- Salto Access Zone\
\- Competencies
{% endcolumn %}
{% endcolumns %}

\* This item is divisionless, so having "View Site" in any division allows an operator to view the properties of this item.

\*\* This item CANNOT be added or removed with "Edit Site" privilege.

An operator with "View Site" privilege in a division can view the properties of any of the following Device Software items, in that division.

* FT Controller Service
* FT Import-Export Service
* FT Bootstrap Protocol Service
* FT Intercom Service
* Remote Server

An operator with "View Site" privilege in a division can see any Command Centre Client Monitor Site Viewers, in that division.

**Reports:**

An operator with "View Site" privilege in a division can add, delete, generate, view and modify the properties of a Site Configuration Report description in that division. When run, the Site Configuration Report will only report the properties for Command Centre items to which the operator has "View" privilege.

An operator with "View Site" privilege in a division can add, delete, generate, view and modify the properties of a Contact ID Report description in that division. The Contact ID Report will only include those Command Centre items to which the operator has "View" privilege.

An operator with "View Site" privilege in a division can add, delete, generate, view and modify the properties of an Access Report description (Summary or Detailed) in that division. The following rules apply:

* When the Access Report is run, it will only report on those Access Zones or Salto Access Zones to which the operator has the privilege to view the Access Zone's properties.
* If a Door rather than an Access Zone is configured in the report description, then the Access Zone that the Door provides entry to, is the effective Access Zone that is reported on. The same does not apply for Salto Doors, as these may be reported on directly.

**Detailed Access Report:**

If the operator has privilege to view the properties of an Access Zone, Salto Access Zone or Salto Door included in the report then all cardholders which have access to that item (their name only) at the time configured in the report description (or for the configured day category) will be displayed in the Detailed Access Report. This applies regardless of the operator's privileges, or lack of them, to that cardholder.

The content of a PDF is only displayed in the Detailed Access Report, for each cardholder, if the operator has privilege to view the content of that PDF for that cardholder.

The cardholder's card number is only displayed in the Detailed Access Report, if the operator has the privilege to view the card number for that cardholder.

**Summary Access Report:**

When the Summary Access Report is run, it displays the names of any Access Groups, and other information about that Access Group, for any Access Groups that provide access to that item at the time configured in the report description (or for the configured day category). This applies regardless of the operator's privileges, or lack of them, to these Access Groups.

**Fence Voltage Report:**

An operator with "View Site" privilege in a division can add, delete, generate, view and modify the properties of a Fence Voltage Report description in that division. The Fence Voltage Report must only include those Command Centre items to which the operator has "View" privilege.

### View Vists

An operator with "View Visits" privilege can perform the following in the Visitor Management system:

* View visits for a Reception that the Receptionist does not have edit rights for. Guards may be given 'view only' access.
* Print Visitor Management reports (with the exception of the Evacuation Report).

**Note:** This privilege is not required if the "Edit Visits" privilege is granted.

### View Workflows

An operator with "View Workflows" privilege in a division can view the properties of all Workforce Manager Workflows and Rules in that division, and view the diagrams of all versions of those Workflows and Rules.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges/which-operator-privileges-you-require/configure.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
