> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges/which-operator-privileges-you-require/cardholder-access.md).

# Cardholder Access

### Add Card or Credential

An operator with "Add Card or Credential" privilege in a division can add a card, mobile credential or FIDO2 credential to a cardholder in that division in both Command Centre client and Configuration client.

**Notes:**

* This privilege includes "View Cardholders", (i.e. can view cardholder properties, except for the cardholder notes and operator configuration details, for any cardholder in that division).
* "Edit Cardholders" includes the ability to perform this action.
* Does not allow removal of the card or credential, (i.e. the "Remove Card or Credential" privilege is needed to do this).
* Does not allow editing of an existing card or credential, (i.e. the "Edit Card or Credential Attribute" is needed for this).

### Add Cardholder Notes

An operator with "Add Cardholder Notes" privilege in a division can perform the following in Command Centre:

* View and add Cardholder Notes but cannot modify or delete existing Notes (Command Centre Client only).
* View Cardholder Notes only (Configuration Client only).
* Find Cardholders and view only all properties of a cardholder except the **Operator Configuration** tab.
* See changes to Notes on the **History** tab.
* See the PhotoID option in the **Configure** menu but cannot edit.

### Allow Re-Printing and Re-Encoding

An operator with "Allows Re-Printing and Re-Encoding" privilege in a division can perform the following:

* Anything that the "Print/Preview & Encode Card" privilege allows.
* Print and/or encode a Card that has already been printed/encoded on a Card before with the same identification details, (i.e. Facility Code, Card Number and Issue level).

  **Note:** Without this privilege cards can only be printed and encoded once.

### Assign Personalised Actions

This privilege applies only to the **Cardholder Personalised Actions** tile in the Command Centre Client.

An operator requires the "Assign Personalised Actions" privilege in the division of the output or macro, to be able to assign that item to the **Cardholder Personalised Actions** tile.

**Note:** The operator requires "View Site" or "Edit Site" in the division of the Access Zone to assign it to the tile.

### Bulk Change

An operator with "Bulk Change" privilege in a division can perform the following:

* Add or delete a Bulk Change in that division.
* View and configure the properties of any Bulk Change in that division.
* Save a Bulk Change in that division.
* Run a Bulk Change in that division. \[A bulk change only changes those items that the operator would have sufficient privilege to change via the standard Command Centre user interface (that is, outside of the bulk change).]

### Bureau Batch Printing/Encoding

An operator with "Bureau Batch Printing/Encoding" privilege in a division can perform the following:

* View the properties of Card Types in that division.
* Encode, or print and encode multiple cards of a Card Type in that division.

### Create and Edit Cardholders

An operator with "Create and Edit Cardholders" privilege in a division can perform the following:

* View and edit the properties of a Cardholder report description or Time & Attendance report description in that division.
* Create new Cardholder report descriptions or Time & Attendance report descriptions in that division.
* View and edit cardholder properties for all cardholders in that division, EXCEPT the **Cardholder Notes** and **Operator Configuration** tabs (neither tab is visible).
* Forgive a cardholder in that division anti-passback violations for a selected Access Zone (must also have "Override" privilege within the Access Zone's division).
* Add new cardholders in that division.
* Run Enrolment wizards in that division. \[Can edit cardholder data within an Enrolment wizard only according to their normal edit privileges to that cardholder.]
* Use the **Read MIFARE Card** utility to read card data.

### Create Cardholders

An operator with "Create Cardholders" privilege in a division can create cardholders, but cannot edit cardholders.

### De-Authorise Cardholder

An operator with "De-Authorise Cardholder" privilege in a division can perform the following in Command Centre:

* Anything that the "View Cardholders" privilege allows, AND
* Not applicable to the Configuration Client:

  De-authorise a cardholder (Command Centre), but cannot enable them or modify other entries on the **Cards** tile.

### Delete Cardholders

An operator with "Delete Cardholder" privilege in a division, can delete any cardholder in that division.

### Disable Card

An operator with "Disable Card" privilege in a division can perform the following in the Command Centre Client:

* Anything that the "View Cardholders" privilege allows, AND
* Not applicable to the Configuration Client:

  Disable a Cardholders Card or edit its From/Until Dates for an enabled card, but cannot enable a Cardholders Card or modify any other entries on the **Cards** tile.

### Edit Access Groups

An operator with "Edit Access Groups" privilege in a division can perform the following:

* View and edit the properties of Access Groups in that division, EXCEPT adding or removing cardholders to/from the Access Group (can still "View" the cardholder names).
* Add or delete Access Groups in that division.
* View and edit the properties of an Access Group report description, in that division.
* Add or delete Access Group report descriptions in that division.
* Run Access Group report descriptions in that division. In this case, the Access Group report will only include those Access Groups to which the operator has either "View Access Groups" or "Edit Access Groups" privilege.

### Edit Biometric Data

An operator with "Edit Biometric Data" privilege in a Division can capture/enrol Cardholder Biometric data for Morpho Readers using Finger/Vein/Wave.

**Notes:**

* This privilege will include "View Cardholders", (i.e. can view cardholder properties, except for the cardholder notes and operator configuration details, for any cardholder in that division).
* "Edit Cardholders" will retain the ability to perform this action.

### Edit Card or Credential

An operator with "Edit Card or Credential" privilege in a division can add, remove or edit the attributes (status, issue level, activation and expiry dates) of a card or mobile credential of any cardholder in that division in both Command Centre client and Configuration client.

The privilege exclusively includes the following:

* "Add Card or Credential" privilege
* "Remove Card or Credential" privilege
* "Edit Card or Credential Attribute" privilege

**Notes:**

* This privilege includes "View Cardholders", (i.e. can view cardholder properties, except for the cardholder notes and operator configuration details, for any cardholder in that division).
* "Edit Cardholders" includes the ability to perform these actions.

### Edit Card or Credential Attribute

An operator with "Edit Card or Credential Attribute" privilege in a division can edit the following attributes of an existing card or mobile credential of a cardholder in that division, in both Command Centre client and Configuration client.

The attributes that can be edited are:

* Status
* Issue Level
* Activation date (From)
* Expiry date (Until)

**Exclusions:**

* The privilege does not allow Print and Encode nor View Pins functionality. These functions have their own privileges.
* Card numbers, mobile numbers, email addresses, and mobile model descriptions are not editable (for existing cards and credentials these are not editable by any privilege).

**Notes:**

* This privilege includes "View Cardholders", (i.e. can view cardholder properties, except for the cardholder notes and operator configuration details, for any cardholder in that division).
* "Edit Cardholders" includes the ability to perform this action.

### Edit Cardholder Name

An operator with "Edit Cardholder Name" privilege in a division can edit, the First Name, Last Name and Short Name of a cardholder in that division in both Command Centre client and Configuration client.

**Notes:**

* This privilege includes "View Cardholders", (i.e. can view cardholder properties, except for the cardholder notes and operator configuration details, for any cardholder in that division).
* "Edit Cardholders" includes the ability to perform this action.

### Edit Cardholder Notes

An operator with "Edit Cardholder Notes" privilege in a division can perform the following:

* View, add or delete Cardholder Notes for cardholders in that division.
* View all cardholder properties for cardholders in that division, EXCEPT the **Operator Configuration** tab.

### Edit Cardholder Personal Data

An operator with "Edit Cardholder Personal Data" privilege in a division can edit the Personal Data Field values of a cardholder in that division in both Command Centre client and Configuration client.

**Notes:**

* This privilege includes "View Cardholders", (i.e. can view cardholder properties, except for the cardholder notes and operator configuration details, for any cardholder in that division).
* "Edit Cardholders" includes the ability to perform these actions.
* This privilege complements the existing operator group Personal Data privilege overrides to allow PDFs to be edited, only viewed, or hidden. For example, an operator with "Edit Cardholder Personal Data" privilege cannot edit a PDF that is hidden from them or is view only.

### Edit Cardholders

An operator with "Edit Cardholders" privilege in a division can edit all Cardholder fields EXCEPT the **Division**, and restricts those operators from creating new Cardholders.

### Edit Passenger Details

An operator with "Edit Passenger Details" privilege in a Division can add/change/remove a default floor for a ThyssenKrupp Elevator System. This allows the operator to view a list of elevator groups, and from this list view eligible default floor Access Zones and assign them.

### Modify Access Control

An operator with "Modify Access Control" privilege in a division can perform the following:

* View the properties of Access Groups in that division.
* Add or remove cardholders (to whom they must have "View" privilege) from Access Groups in that division.

### Print/Preview & Encode Card

An operator with "Print/Preview & Encode" privilege in a division can perform the following:

* Preview or print cards for cardholders in that division.
* Encode or print and encode cards for cardholders in that division, with the ability to enter user-defined PINs or generate random PINs, but not view PINs (as they will be masked).

  **Note:** The card's card type does not need to be in that division.
* View the cardholder's properties for all cardholders in that division.
* View cardholder properties for all cardholders in that division, with the exception of the Cardholder Notes and the Operator Configuration tab.
* Run Enrolment wizards in that division, but in a view only mode (no ability to edit cardholder data or create new cards for a cardholder).
* Run Enrolment wizards in that division with the ability to print or encode cards for cardholders in that division. Enter user-defined PINs or generate random PINs when encoding cards but not view them (since they are masked).

  **Note:** The card's card type does not need to be in that division.

### Remove Apple Account Binding

An operator with "Remove Apple Account Binding" privilege in a division can remove an Apple Account Binding allowing a Cardholder to provision an Apple badge.

### Remove Card or Credential

An operator with "Remove Card or Credential" privilege in a division can remove a card, mobile credential or FIDO2 credential from a cardholder in that division in both Command Centre client and Configuration client.

**Notes:**

* This privilege includes "View Cardholders", (i.e. can view cardholder properties, except for the cardholder notes and operator configuration details, for any cardholder in that division).
* Does not allow adding cards or credentials.
* Does not allow editing of card or credential attributes.
* "Edit Cardholders" includes the ability to perform this action.

### View Access Groups

An operator with "View Access Groups" privilege in a division can perform the following:

* View the properties of Access Groups in that division, including the names of all cardholders who belong to the Access Group.
* View and edit the properties of an Access Group report description, in that division.
* Run Access Group reports in that division. In this case, the Access Group report will only include those Access Groups to which the Operator has "View Access Groups" privilege.
* Add or delete Access Group report descriptions in that division.

### View Cardholder Notes

An operator with "View Cardholder Notes" privilege in a division can perform the following:

* View Cardholder Notes for cardholders in that division.
* View all cardholder properties for cardholders in that division, EXCEPT the **Operator Configuration** tab.

### View Cardholders

An operator with "View Cardholders" privilege in a division can perform the following:

* View and edit the properties of a Cardholder report description or Time & Attendance report description in that division.
* Create new Cardholder report descriptions or Time & Attendance report descriptions in that division.
* View cardholder properties for all cardholders in that division, EXCEPT the **Cardholder Notes** and **Operator Configuration** tabs.
* Run Enrolment wizards in that division, but in a view only mode (no ability to edit cardholder data or create, print or encode cards).
* Use the **Read MIFARE Card** utility to read card data.

### View Encrypted Cardholder User Codes (API Only)

An operator with "View Encrypted Cardholder User Codes" privilege can view encrypted Cardholder user codes (REST API only).

**Note:** The "Advanced User" privilege does not automatically convey this privilege.

### View Events

**Note:** The purpose of this privilege is to allow operators who do not (and should not) have the "View Events and Alarms" privilege, and whose role does not involve monitoring/managing Alarms, to view events in the Command Centre Client, (in particular, but not exclusively, events on the Event Trail tile), and seeing the Alarm state of an item in either client. It will not be possible to view the details of the Alarm.

An operator with "View Events" privilege in a division can perform the following:

* View events in that Division using the Command Centre Client.
* With the exception of the above, will NOT be able to do any of the other things the "View Events and Alarms" privilege allows.

### View PINs

There are two types of PINs (personal identification numbers); System Generated PINs and User Defined PINs. An operator with "View PINs" privilege can view PINs assigned to cards according to the following rules:

* An operator can only see a System Generated PIN if they have the "View PINs" privilege AND the PIN has not been changed. If changed, it then becomes a User Defined PIN and the rules below apply.
* An operator can only see a User Defined PIN if they have the "View PINs" privilege AND the **Store PINs for later viewing** check box was checked on the Server Properties **Card Security** tab at the time the PIN was set.
* A User Defined PIN that was set or changed while the **Store PINs for later viewing** check box was unchecked (on the Server Properties **Card Security** tab) is not retrievable and will need to be reallocated if the Cardholder has forgotten it.

**Note:** "View PINs" functionality is not supported for PIV cards.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges/which-operator-privileges-you-require/cardholder-access.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
