> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/wizard-templates.md).

# Wizard Templates

### Introduction

Wizard templates are intended to standardise Command Centre implementations and improve the install time for sites. Installation companies may create themselves a set of standard templates that may be re-used for the majority of their sites. These templates can be copied from site to site using the export/import feature of the templates.

From within the **Wizard Templates** List Window you can set up new wizard templates, and you can view, modify and delete existing wizard templates.

Operators require the "Edit Site" operator privilege in the appropriate Division to be able to create, edit import or export wizard templates.

**Note:**

Localbus hardware device and Cardholder wizards do **not** support templates.

### Procedure

#### Opening the Wizard Templates window

1. Click **Wizards** from the menu bar.
2. Click **Wizard Templates**.

   The **Wizard Templates** List Window displays:

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-27f22bae7d81d299325ca375e52e6813d63edf2a%2Fwizardtemplate_mlw.png?alt=media)
3. Go to the procedure you want to perform next.
   * [Creating a new wizard template](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/wizard-templates.md)
   * [Creating an item using an existing wizard template](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/wizard-templates.md)
   * [Importing/Exporting wizard templates](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/wizard-templates.md)

#### Creating a new wizard template

1. **Right click** and select **New**.

   The Configuration Wizard launch page displays.
2. Select what type of template to create by selecting the type of hardware, and click the **Start** button.

   The first page of the wizard displays.
3. Work your way through the wizard, until you reach the 'Finish' screen.
4. Enter a **Template Name**, and optionally a **Template Description** for the template.
5. Select a **Template Division** for the template from the drop-down list.
6. Click the **Save** button.

   The new wizard template is saved and displays in the **Wizard Templates** List Window.
7. Do you want to create the Command Centre item you've just configured?

   <table><thead><tr><th width="78">If...</th><th>then...</th></tr></thead><tbody><tr><td>no</td><td>click the <strong>Cancel</strong> button.<br>The Command Centre item is not created. The Configuration Wizard launch page re-displays.</td></tr><tr><td>yes</td><td>click the <strong>Finish</strong> button.<br>The Command Centre item is saved to the database. The Configuration Wizard page re-displays, with the item you've just created appearing in the <strong>Items you have added</strong> list on the right.</td></tr></tbody></table>
8. Click the **Close** button.

#### Creating an item using an existing wizard template

1. **Double-click** on the wizard template you want to use.

   The first page of the wizard displays.

   **Notes:**

   * Some fields in the wizards are not saved in the template as they are unique to that item, (e.g. **MAC** and **IP Address** ).
   * If the **Name** of the item being configured has a number on the right hand end of it, then the system increments the number by one from the highest number in use, for the name, in the system.

     *For example:*

     If controllers named **Bldg1 Controller1** to **Bldg1 Controller7** exist on the system, by default, the next one would be named **Bldg1 Controller8**.
2. Work your way through the wizard, until you reach the 'Finish' screen.
3. Click the **Finish** button to create the items configured/chosen in the wizard and save them to the database.

   The wizard closes, and if you open the relevant List Window, (i.e. **Hardware** or **Door** List Window), the items will now appear there.

#### Importing/Exporting wizard templates

Wizard templates can be exported to another Command Centre installation, or you can import wizard templates that have been saved from another Command Centre system.

**Note:** Importing/exporting templates does not delete them from the source, it only copies them to the target location.

1. **Right click** in the List Window and select the required option, (i.e. **Import** or **Export** ).
2. Which option did you select?

   <table><thead><tr><th width="78">If...</th><th>then...</th></tr></thead><tbody><tr><td>Import</td><td><ol><li>From the displayed pop-up window, path your way to the Command Centre wizard template(s) you wish to import.</li><li>Select the division to import the templates into from the <strong>Division</strong> drop-down.</li><li><p>Click the <strong>Open</strong> button.<br>The template(s) are imported and appear in the <strong>Wizard Templates</strong> List Window.<br><br><strong>Notes:</strong></p><ul><li>If any templates of the same name already exist, then no templates are imported and an error message displays.</li><li>The contents of all the files are validated. If a template fails the validation test then no templates are imported an error message displays.</li></ul></li></ol></td></tr><tr><td>Export</td><td><ol><li>From the displayed <strong>Browse for Folder</strong> dialog, path your way to the directory to export the template(s) to.</li><li>Click the <strong>OK</strong> button.<br>A message displays indicating that the selected wizard template(s) have been exported. The name of the file(s) is the name of the template(s), with the file extension <strong>.FTWizardTemplate</strong>.</li></ol></td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/wizard-templates.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
