> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-doors.md).

# Creating Doors

### Introduction

The **Door Wizard** allows operators to easily create Doors in Command Centre.

### Door Wizard

The **Door Wizard** contains a number of pages which prompt you to enter certain information to create a Door.

**Follow the instructions displayed.**

#### 'Door Details' page

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f4aa9ce075a9b68d150a68b23c6e64444712e7ef%2Fdoorwizard_scrn1.png?alt=media)

1. Enter a **Name**, **Description** and **Prefix** for the Door.

   Refer to Step 4 of the [Configuration Wizard](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard.md) procedure for details.
2. Select the **Division** the Door is to be created in from the drop-down list.

   **Notes:**

   * By default the Controller's division populates the **Division** field.
   * The **Division** drop-down will list all the divisions for which you are privileged to create doors in. If you change the division here, this resets only the door’s division. All other items, (e.g. inputs, readers, etc.) will be created under the Controller’s division.
3. If the wizard was started from the Configuration Wizard (thus a controller must have been selected) then the **Controller** field will be 'read only' and the assigned controller will be selected. Otherwise the field will not be 'read only' and the **-- None Selected --** entry selected.
4. Do you want to use existing hardware or create new hardware items for this Door?

   <table><thead><tr><th width="162">If you want to...</th><th>then...</th></tr></thead><tbody><tr><td>use existing hardware,</td><td>check the <strong>Use existing hardware</strong> checkbox.<br>The <strong>Reader(s) connected to</strong> field becomes disabled.</td></tr><tr><td>create new hardware,</td><td>from the <strong>Reader(s) connected to</strong> drop-down list, select what the door's hardware items will be connected via, (i.e. 'Controller').</td></tr></tbody></table>
5. Select the appropriate **Lock Type** from the drop-down list:

   <table><thead><tr><th width="108">Lock Type</th><th>Description</th></tr></thead><tbody><tr><td>Shear</td><td>When configured as a Shear Lock and a valid card is presented the door unlocks.<br>If the door is not physically opened it will relock after the "Door unlock time" is exceeded.<br>If the Door is opened, the lock relay remains active until the Door open sensor recloses, (i.e. the Door closes).<br><strong>Uses:</strong><br>Electronic bolts or double doors that do not have to rebate to prevent the inactive door locking prior to the active door.</td></tr><tr><td>Mortise</td><td><p>When configured as a Mortise Lock and a valid card is presented the door unlocks.</p><p>If the door is not physically opened it will relock after the "Door unlock time" is exceeded.</p><p>If the Door is opened the lock relay resets immediately when the Door Open sensor switches open.</p><p>When the Door physically closes the lock is in a state that immediately re-secures the Door.</p><p><strong>Uses:</strong></p><ul><li>Most standard lock situations</li><li>Magnetic clamp locks</li></ul></td></tr><tr><td>Automatic</td><td>When configured as an Automatic Lock the lock relay will always be activated for the user configured time. This time is set by the use of the <strong>Door unlock time</strong> option. All other settings will be as for the other lock types.<br><strong>Uses:</strong><br>Magnetic clamp door with only one Input.</td></tr></tbody></table>
6. If your site is licensed for the Contact ID feature, check the **Enable Contact ID CCC Codes** checkbox.

   The **CCC Code** field is enabled. Refer to Step 4 of the [Configuration Wizard](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard.md) procedure for details.
7. Click the **Next** button.
8. Did you check the **Use existing hardware** checkbox?

   If **no**, go to Step 13.

   If **yes**, then the 'Door Entry/Exit zones and devices' page displays.

#### 'Door Entry/Exit zones and devices' page

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-70b874c65d993541564509013ec68ca46014efb5%2Fdoorwizard_scrn7.png?alt=media)

The Entry and Exit **Access Zone** drop-down lists are populated with all Access Zones you have access to. Unless otherwise stated, all of the other drop-down lists are restricted to items on the Controller (specified on the 'Door Details' page), and are also restricted to items which are not already on a door.

9. In the 'Entry' section of this page, select the **Access Zone** you enter into and the associated **Reader** from the drop-down lists.
10. In the 'Exit' section of this page, select the **Access Zone** you exit to and the associated **Reader/Pushbutton** from the drop-down lists.

    If you selected an item that can be assigned to a door as a Pushbutton rather than a Reader, the additional **Free Handle** option is enabled. This can be used for doors where the lock does not need to be unlocked for exit. If you enable (check) this option, and a valid exit request is made, the doors lock relay will not activate (doors outside handle will remain locked), in order to suppress the forced door alarm.
11. In the 'Input and Output' section of this page, select the Inputs and Outputs for this door.
12. Click the **Next** button.

#### 'Door Entry Zone' page

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-a4addcb75c03dfe291e5a3a93c1741ef4628b07e%2Fdoorwizard_scrn3.png?alt=media)

13. Select the **Access Zone** you enter into from the drop-down list.
14. Enter a **Reader Name** and **Description** if applicable.
15. Select a **Reader Type** from the drop-down list.

    **Note:** The options available in this drop-down list depends on what you selected previously for the readers to be connected to. If you assigned this door to a Controller 6000 (on the 'Door Details' page) there will be an additional 'HBUS Reader' type available. If you select 'HBUS Reader', a **Reader Serial Number** field appears, allowing the serial number of the HBUS Reader to be entered.
16. Click the **Next** button.

#### 'Door Exit Zone' page

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7cbe408d0749fdb2864b87337bff4964aa64e4fc%2Fdoorwizard_scrn4.png?alt=media)

17. Select the **Access Zone** you exit to from the drop-down list.
18. Select whether exit is controlled by a **Pushbutton** or **Reader**, by clicking the appropriate radio button.
19. Enter a **Name** and **Description** for the Pushbutton/Reader.
20. Which radio button did you select?

    <table><thead><tr><th width="132">If you selected...</th><th>then...</th></tr></thead><tbody><tr><td>Pushbutton</td><td>an additional <strong>Free Handle</strong> option is available.<br>This can be used for doors where the lock does not need to be unlocked for exit. When this option is enabled (checked), and a valid exit request is made, the doors lock relay will not activate (doors outside handle will remain locked), in order to suppress the forced door alarm.</td></tr><tr><td>Reader</td><td>a <strong>Reader Type</strong> drop-down list is available.<br>The options available in this drop-down list depend on what type of connection device, (i.e. Controller) you selected earlier. See Step 12.</td></tr></tbody></table>
21. Click the **Next** button.

#### 'Input and Output' page

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-0a428b749407bbc2fc9b5dfd192ec3b4f4089562%2Fdoorwizard_scrn5.png?alt=media)

22. Enter the names of the inputs and outputs to be created for this door.
23. Click the **Next** button.

#### 'Finish' page

This wizard page is the same for Controllers and Doors, and provides the same options. Refer to ['Finish' page](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard.md) in the Configuration Wizard procedure for further detail.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-doors.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
