> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard.md).

# Configuration Wizard

### Introduction

The **Configuration Wizard** enables you to easily configure the following for your site:

* Controllers
* Doors
* Cardholders with cards

### Procedure

1. Click **Wizards** from the menu bar.
2. Click **Configuration Wizard**.

   The Configuration Wizard launch page displays:

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-081f2db90c89c71e3edaa3e2c0a9bdaed53ed794%2Fconfigurationwizard_6000.png?alt=media)

   **Note:** In brand new systems, the fields in the **Device or Door** section of the Configuration Wizard launch page will be blank, until such time as a Controller has been created.
3. What do you want to create?

   <table><thead><tr><th width="126">If...</th><th>then...</th></tr></thead><tbody><tr><td>a Controller</td><td><ol><li>Select the <strong>Controller</strong> radio button.</li><li>Select the Controller type you require for your system from the <strong>Controller Wizard</strong> drop-down list.</li><li>Optionally select an already saved <strong>Template</strong> from the drop-down list.</li></ol></td></tr><tr><td>a Door</td><td><ol><li>Select the <strong>Device or Door</strong> radio button.</li><li>Select the Controller you require from the <strong>Controller</strong> drop-down list.<br>The <strong>Device Wizard</strong> drop-down list is populated with all the door wizards that can be used with the selected Controller.</li><li>Select the Wizard you require from the <strong>Device Wizard</strong> drop-down list.</li><li><p>Optionally select an already saved <strong>Template</strong> from the drop-down list.<br><br><strong>Notes:</strong></p><ul><li>Only Controllers in divisions that you have the "Edit Site" operator privilege for, will appear in the drop-down list.</li><li>To create a Door you must select a Controller.</li></ul></li></ol></td></tr><tr><td>Cardholders</td><td>go to <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-cardholders.md">Creating Cardholders</a> for the rest of this procedure.</td></tr></tbody></table>
4. Click the **Start** button.

   The first screen of the appropriate wizard displays. Click the **Next** and **Back** buttons to step through the wizard.

   **Notes:**

   * The **Finish** button can be clicked at any time to create the item without stepping through each page. It brings you directly to the 'Finish' page where you can also create a template.
   * There are a number of configuration options common to all Controller and Door wizards, as follows:

     <table><thead><tr><th width="144">Option</th><th>Description</th></tr></thead><tbody><tr><td><strong>Name</strong> and <strong>Description</strong> fields</td><td><p>Enter a name and description for the item being created.<br><br><strong>Notes:</strong></p><ul><li>The name can be up to 60 characters long, and the description, which is optional, can be up to 200 characters long.</li><li>As you type in the Name field, the Prefix field will also change to be the same.</li></ul></td></tr><tr><td><strong>Prefix</strong> field</td><td>This field appears on the first page of each of these wizards. It allows you to specify a naming prefix for any child items of the item you are creating.<br>The wizard will use this prefix when creating default names for child items, (e.g. if you entered Door-1 as the prefix, any child inputs would be labelled Door-1 Input 1, Door-1 Input-2, etc.).<br><br><strong>Note:</strong> A prefix can be up to 60 characters long. If a child item's name (determined by the prefix and a suffix) is longer than 60 characters, then the prefix will be truncated.</td></tr><tr><td><strong>CCC code</strong> field</td><td><p>These fields will only appear if your site is licensed for the Contact ID feature.<br>Items that are required to report Contact ID events need to be configured to do so by assigning CCC codes to them.<br>Change the code in the <strong>CCC</strong> field if required (3 Hex digits 0-9, B-F).<br><br><strong>Notes:</strong></p><ul><li>By clicking the Autofill button the wizard will pick the next available code for you.</li><li>000 can be used to indicate that no specific zone or user information applies.</li></ul></td></tr><tr><td><strong>Icon Set</strong> list</td><td>This drop-down list is populated with all the icon sets that can be applied to the item being created.<br>Select the icon set required.</td></tr><tr><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-78b6786245dd04fd957b81f18dc7f94a341bcae6%2Ftickbox.png?alt=media" alt=""> tick-box</td><td>By default, the <img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-78b6786245dd04fd957b81f18dc7f94a341bcae6%2Ftickbox.png?alt=media" alt=""> tick-box beside an item indicates that it is selected. For any unused items, uncheck the appropriate tick-box.</td></tr><tr><td><strong>Restore Defaults</strong> button</td><td>This button restores everything on that page to how it was when you first entered the page.</td></tr></tbody></table>
5. Refer to the relevant topic for details relating to the particular item you selected.

   [Creating Controllers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-controllers.md)

   [Creating Doors](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-doors.md)

#### 'Finish' page

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-b75a1ba58b9c66b874ebda91d63e306fdff1a557%2F37128.png?alt=media)

The final wizard page is titled 'Finish'.

**Note:** If the wizard was invoked with a template selected (at Step 3 of this procedure), then the fields on this screen will be populated, (i.e. they will display the name, description and division of the template selected). Otherwise they will be blank.

6. Do you want to save this configuration as a template for future use?

   <table><thead><tr><th width="72">If...</th><th>then...</th></tr></thead><tbody><tr><td>yes</td><td><p>Enter a Name and Division for the template, and optionally a Description.<br><br><strong>Notes:</strong></p><ul><li>If this wizard was started by opening an existing template, the <strong>Template Name</strong> field shall default to the name of the template. If you change the name, click the <strong>Save As</strong> button to create a new template, and the existing one will not be overwritten. If you click the <strong>Save</strong> button, the existing template will be overwritten.</li><li>Some fields in the wizards are not saved in the template as they are unique to that item, (e.g. <strong>MAC</strong> and <strong>IP Address</strong>).</li></ul></td></tr><tr><td>no</td><td>go to Step 7.</td></tr></tbody></table>
7. Click the **Finish** button to create the items configured/chosen in the wizard and save them to the database.

   Once the Progress bar reaches the end, the Configuration Wizard launch page re-displays.

   You will notice that the item you created now appears in the **Items you have added** list on the right of this screen.

   If you open the relevant list window, (i.e. **Hardware** or **Door** list window), the item will also appear there.

   **Note:**

   If you have made a mistake, you can choose to remove the item by clicking on it in the **Items you have added** list and clicking the **Remove Item** button. All child items that were created in the wizard will also be removed, (e.g. inputs, outputs, readers, etc.).
8. You can now add further items to the system, (i.e. hardware devices, doors or cardholders), by either:
   * repeating Steps 3 through to 7, or
   * using an existing template if one has been saved for the type of item you want to add.

     See [Wizard Templates](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/wizard-templates.md) for the procedure.

**Notes:**

* If you click the **Close** button now, you will exit the **Configuration Wizard**, and you can create further items later.
* Once you have configured the hardware, you can run a wiring report which provides instructions on how to wire the hardware items. See [Wiring Report](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/reports/creating-a-new-report/wiring-report.md) for further detail.

### In This Section

* [Creating Controllers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-controllers.md)
* [Creating Doors](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-doors.md)
* [Creating Cardholders](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard/creating-cardholders.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
