> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/advanced.md).

# Advanced

### Introduction

The Advanced tab enables you to:

* enable/disable the Activity Indicator ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-d9e19db1388723623bc7215f66738b4cb841dc72%2Findicator.png?alt=media).

  If enabled, the Activity Indicator is always visible while Command Centre is running and responding, and provides operators with confirmation that the Command Centre application has not ceased operation.
* set the default mapping when a Logic Block or Output is used as an Input.
* have old inactive alarms automatically processed by the system. The purpose of this functionality is to clear the alarm buffer regularly for sites that do not manage alarms via Command Centre.
* change the password for the controller diagnostic web interface.
* enable/disable reader display messages for OSDP Readers by default.

### Procedure

1. Open the **Command Centre Server Properties** window. [How?](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/opening-the-server-properties-window.md)
2. Click the **Advanced** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e3b9b0b36938b85e67beee7fdbdc6aca6f9ea629%2Fserveradvanced.png?alt=media)
3. Check the **Display Application Activity Window** checkbox if you want the Activity Indicator to display while Command Centre is running.
4. From the **Mapping** drop-down list, select the default state translation to be used when a Logic Block, Output or Virtual Output is used in place of an Input.
5. Check the **Automatically Process Alarms** checkbox if you want the system to automatically process old inactive alarms, and indicate the time period to keep inactive alarms before they are auto-processed. By default, all inactive alarms older than a day (24 hours) will be processed.

   (Range = 1 - 999 days)

   **Notes:**

   * The minimum period that an alarm must exist before it can be auto-processed is 1 day.
   * The event history of each auto-processed alarm will be updated with the time of processing and a statement that it was auto-processed. Each daily auto-processing run will log a start and completion event.
6. The **Site Default Mail User Agent** is for use when generating Visitor Management Email Invitations sent through Notifications.

   Select the appropriate Site Default Mail User Agent from the drop-down list if required.
7. If your site is licensed to create Gallagher Class 5 End-of-Line Modules (ELMs), an additional **Class 5 ELMs** section will be visible on this tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-bebd65512006cbdab2b8169f42785e4f473efd54%2Fserveradvanced_class5elms.png?alt=media)

   Select the required global state for Class 5 ELMs from the **State Settings** drop-down list. The options are:

   <table><thead><tr><th width="274">Option</th><th>Description</th></tr></thead><tbody><tr><td>Trouble Output = Masked State</td><td>This option indicates the Masked state, and is the default setting.</td></tr><tr><td>Trouble + Alarm Outputs = Masked State; Trouble Output = Fault State</td><td>Selecting this option means that trouble and alarm means Masked, and trouble alone indicates Fault.</td></tr></tbody></table>

   **Note:** Different states can be configured for individual ELMs if required. See [Configuring a Class 5 ELM](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/class-5-end-of-line-module-elm/configuring-a-class-5-elm.md) for further detail.
8. If you want OSDP and Morpho Biometric Readers to display access and status messages on their screens (if they have screens) by default, then select the **OSDP Reader Display Messages** checkbox. Otherwise, deselect it.

   This setting defines what an OSDP or Morpho Biometric Reader does when it has the 'Use site default settings' check box selected on its **Advanced** (OSDP) or **Advanced Settings** (Morpho Biometric) tab.
9. The **Visit Counting** section displays and the fields are enabled if your site is licensed for the 'Visit Count' feature.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-4ad2a77397c657e0f9d19efb7ce0bad449a86676%2Fadvancedtab_visitcounting.png?alt=media)

   On a new installation, the Visit Counting fields will be populated with default values. On an upgrade, the visit count will be pre-populated if previously made visits are within the configurable period.

   This feature is only editable for operators with the 'Edit Site' privilege or higher.

   <table><thead><tr><th width="141">Field</th><th>Description</th></tr></thead><tbody><tr><td>Period</td><td>The Period length is configurable. A warning message displays when 0 is entered.<br>(Default = 12 months. Range = 1-999).</td></tr><tr><td>Warning</td><td>A warning message displays in Visitor Management when the number of visits by a visitor (in the <strong>Period</strong> specified) are greater than or equal to the <strong>Alert</strong> or <strong>Denial</strong> Threshold.<br>(Default = 14 visits)</td></tr><tr><td>Alert</td><td>A warning message displays in Visitor Management when the number of visits by a visitor (in the <strong>Period</strong> specified) are greater than or equal to the <strong>Denial</strong> Threshold.<br>(Default = 21 visits)</td></tr><tr><td>Denial</td><td>A warning message displays in Visitor Management when the number of visits by a visitor (in the <strong>Period</strong> specified) has met the <strong>Denial</strong> Threshold.<br>(Default = 28 visits)</td></tr></tbody></table>

   **Note:** Thresholds can be configured 'off' by setting values to '0', however at least one threshold must be configured.
10. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/advanced.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
