> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/upgrading-a-controller-6000-to-a-controller-7000.md).

# Upgrading a Controller 6000 to a Controller 7000

### Introduction

This procedure assists sites with the upgrading of a Controller from a C6000 to C7000. It reduces the time taken to configure a C7000 based on the C6000 that it is replacing, allowing sites to create an equivalent C7000 with most of the configuration copied over from the C6000 and linked items re-attached.

Operators require the "Edit Site", "Launch Configuration Client" and "Maintenance Override" privileges to perform this procedure.

### Before you begin

* All customisations will need to be removed from the Controller 6000 prior to the migration to the Controller 7000.
* The Alarm and Event Viewer will be flooded with "Part - no such type" (if the controller customisation items are present on the system) once the migrated Controller 7000 software controller is upgraded due to the external system controller customisation being linked to the newly migrated Controller 7000. A compatible controller customisation will need to be applied to the newly migrated Controller 7000 in order to address this issue.

### Procedure

1. Click **Configure** from the menu bar, then **Hardware**.

   The **Hardware** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/tree-view.md)).
2. **Right click** on the Controller 6000 that you want to upgrade, and select **Upgrade to 7000...**

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-a08c7a839248f40b9c419301e2f202ba5bb8ad86%2Fupgradeto7000.png?alt=media)

   The following warning message displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-dba9ae6f2f105dc48b386d64d6bfd270179e7ba7%2Fextendedwarningmessage.png?alt=media)
3. Click the **Upgrade to 7000** button.

   **Note:** The following screen will display if there are Controllers with reflected outputs spanned from the Controller being upgraded. It indicates which Controllers need to be restarted as a list that can be copied and pasted.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-855311d4c5252f529ce8ef2dce5086f1e24f1f63%2Fcontrollerlist.png?alt=media)

   If this screen does display, do the following:

   1. Click the **Copy List** button to copy the Controllers list to the clipboard.

      The following message displays:

      ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ccfa4c5bc28b27c042d76c4dfc3d616d84d6b46d%2Fcopytoclipboard.png?alt=media)
   2. Click the **OK** button. The message dialog closes.
   3. Paste the copied list to Notepad, etc., and click the **Continue** button to start the upgrade.

   The **General** tab of the Controller properties displays. The **Item Type** is now a Controller 7000.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7b02a3cb2361eca67dfaa3a4f6ed217e2149082c%2Fcontrollerproperties_generaltab.png?alt=media)

   Most of the configuration is copied across from the Controller 6000 item. The exceptions are:

   * **Network** tab: Controller MAC Address set to "00 00 00"
   * **Software** tab: Fields set to "Use System Default", scheduled upgrade unchecked, USB Use site default checked, HBUS display Language set to "English"
   * **Setup** tab: If the Controller 6000 was configured as Starter Kit or 2-Door, when upgraded to C7000 it will set "Restricted Controller" as unchecked and will be disabled by default. This checkbox will only be enabled after clicking the **Apply** or **OK** button.

   To select the restricted controller as "Starter Kit", you need to remove the C6000 Starter Kit Controller as the customer Command Centre license will only ever allow one Starter kit Controller per site.
4. Change the Controller **Name** if necessary.

   **Note:** Gallagher recommend that you check the properties of each tab to ensure items are copied over before clicking **Apply**.
5. Click the **OK** or **Apply** button.

   **Note:** Once you click **OK** or **Apply**, there is no way to undo that action.

   Communication is disabled for the Controller 6000, (i.e. it is overridden to "Stopped Communication"), to minimise the disruption while moving the items over to the Controller 7000. An "Operator Stopped Communication" event is generated.

   Both Controllers display in the Hardware List Window, (i.e. the new Controller 7000 item appears and the Controller 6000 has **"-Old"** added to the end of it’s name).

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fd556d5345297cb24ed99715f179b5083a710392%2Fc6000_old.png?alt=media)

   **Note:** Not all of the configuration is copied over to the C7000, and some items may still be associated with the C6000. Items that are currently under editing cannot be moved during an upgrade. If all items were successfully moved or there were no items to move no message will be shown. However, the summary message below will display advising of any items that were **not** moved over to the new Controller.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-a56de3b25b583a37727260d4c6cfb19458393a74%2Fcontrollerupgradesummarymessage.png?alt=media)

   If the C6000 configuration contains FT items that you do not have privileges to write, that FT item will not be updated and the following warning message will display:

   *"You wrote a field that you do not have privileges to."*

   You can open the **Details** tab of the "Controller 7000 Upgraded from Controller 6000" event to see the list of all FT items that you do not have privileges to.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7aa85522e9b2881bead918efd9b82184b1793a7d%2Fupgradec6ktoc7keventdetails.png?alt=media)
6. On the Controller 7000, click the **Network** tab and provide the correct **MAC Address**.
7. Click the **OK** or **Apply** button.
8. Power off the old Controller 6000.
9. Swap the physical Controller with the new Controller 7000 and devices.
10. Power on the new Controller 7000 with DIP Switch 2 turned on.

    **Note:** If a DHCP server is present on the network but you want to use BootP to set up the controller, you should enable DIP switch 4 to prevent the controller from obtaining an IP address from the DHCP server.
11. Recheck using the Find Tool to see if all associated items are moved over. Some items may need to be updated manually like Site Plans, Macros, etc.

    **Note:** You can opt to search either by the different Controller types, or for all Controllers at once.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-209b82341273fc7ee3ff2aed488f5571e675bc2b%2Ffindtool_controllers.png?alt=media)
12. Delete the old C6000. Refer to [Deleting items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/deleting-items.md) for the procedure.

### Result

The Controller 6000 has been upgraded to a Controller 7000.

**Note:** If software requires updating, refer to [Device Software](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/device-software.md) for further detail.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/upgrading-a-controller-6000-to-a-controller-7000.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
