> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-secondary-ethernet-operation-mode.md).

# Configuring Secondary Ethernet operation mode

### Introduction

The procedure describes secondary ethernet adapter configuration for a Controller 7000.

**Notes:**

* **Automatic (DHCP)** on secondary ethernet requires v9.40+ controller firmware.
* The controller can find the server automatically if it is assigned a "gallagherserver" DNS alias.

### Configuration

1. Click **Configure** from the menu bar, then **Hardware**.

   The **Hardware** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/tree-view.md)).
2. Highlight the Controller you want to configure automatic DHCP for.
3. **Right click** and select **Properties**.
4. Click the **Network** tab.

   The **General** sub-tab displays by default.
5. Click the **Dual Ethernet** sub-tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-0a8bc11e2dc8578e6c8ac56be08801524cf7ec80%2Fcontroller7000_networktab_dualethernetsubtab.png?alt=media)

   <table><thead><tr><th width="233">Field</th><th>Description</th></tr></thead><tbody><tr><td>Secondary MAC Address</td><td>This field is 'read-only'.<br>Once the controller comes online in Command Centre, regardless of the selected <strong>Operation Mode</strong>, the <strong>Secondary MAC Address</strong> will be automatically populated in this field.</td></tr><tr><td>Operation Mode</td><td>This field is set to 'Disabled' by default and is editable.</td></tr></tbody></table>
6. Select the appropriate **Operation Mode** from the drop-down list.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-bdf96276497ba2ad1418dc5559ebbaff3d5418b1%2Fcontroller7000_dualethernet_operationmode.png?alt=media)

   <table><thead><tr><th width="235.5555419921875">Option</th><th>Description</th></tr></thead><tbody><tr><td>'Disabled',<br>'Mode 1 - Active Backup', or<br>'Mode 4 - 802.3ad Link Aggregation Control Protocol',</td><td>If any of these options are selected, there will be no other fields shown.<br>Go to Step 10.</td></tr><tr><td>'Independent Dual Ethernet'</td><td>Go to Step 7.</td></tr><tr><td>'Ethernet Bridge'</td><td>If this option is selected, there will be no other fields shown.<br>This mode means the Controller will operate as a transparent Ethernet bridge. All network traffic destined for the bridged network will pass through the controller without modification, regardless of traffic type or content.<br><br><strong>Note:</strong> This mode only applies to Enhanced and High Sec Controller 7000s.<br>When selected, the following warning displays:<br><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-83b17fecb24c63c24f8417dceafc1909c6e36385%2Fcontroller7000_ethernetbridge_warning.png?alt=media" alt=""><br>Ensure the secondary ethernet port is NOT connected to the same network segment or switch as the primary ethernet port, and go to Step 10.</td></tr></tbody></table>
7. By selecting 'Independent Dual Ethernet' for **Operation Mode**, additional sections will appear on this screen, as shown:

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-93dcb525ddc5e2ed17eb0de1b65345fd09082eb8%2Fcontroller7000_networktab_independentdualethernetoption.png?alt=media)
8. Click the radio button for the appropriate **Secondary Network Method**, i.e. either **Automatic (DHCP)** or **Manual**.

   **Note:** **Automatic (DHCP)** is selected by default and is the preferred method. However, if you select **Manual** the **Controller Address** section changes as shown below:

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-67d224e9ae37bc533d4cc1fe66e7df6c65be2951%2Fcontroller7000_dualethernet_manual.png?alt=media)

   The configuration for these fields is the same as described for the **General** sub-tab.
9. What occurs if the **Enable IPv6** checkbox is ticked depends on what **Secondary Network Method** you selected.

   <table><thead><tr><th width="182">If you selected...</th><th>then...</th></tr></thead><tbody><tr><td>Automatic (DHCP),</td><td>an <strong>IPv6 Address</strong> field will appear in the <strong>Controller Address</strong> section, and will be automatically populated once the Controller receives an IPv6 address from the DHCP server.<br><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9ba480fb010bb49cc585bc00845fcff8ec7bf633%2Fcontroller7000_networktab_independentdualethernetoption_ipv6address.png?alt=media" alt=""></td></tr><tr><td>Manual,</td><td><p>additional fields will appear.<br><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-6a4185ee3e37515e2e051f3aaac3205ef97cebdd%2Fcontroller7000__dualethernetsubtab_enableipv6formanual.png?alt=media" alt=""><br>Click either the <strong>Network Prefix</strong> or <strong>Address</strong> radio button and enter appropriate details.</p><ul><li><strong>Network Prefix</strong> contains a pre-populated network prefix combo field containing all subnet prefixes available at the Command Centre server machine. The interface identifier of the Controller is pre-populated based on the entered MAC address.</li><li>The <strong>Address</strong> field is free text field to provide complete IPv6 address instead. The given address shall be from the list of IPv6 addresses assigned to the Controller through the auto-configuration process. Hostname is not supported here.</li></ul></td></tr></tbody></table>
10. Click **OK** to exit and save your changes.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-secondary-ethernet-operation-mode.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
