> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-a-controller-for-dhcp/enabling-dhcp-for-a-new-controller-6000-using-the-wizard.md).

# Enabling DHCP for a new Controller 6000 using the wizard

### Introduction

When setting up a new controller in Command Centre, you can enable DHCP for IPv4, IPv6, or both. Follow this procedure to access DHCP in Wizard.

**Note:** For DHCP to work, its configuration must include certain parameters before the Controller will trust the DHCP lease offered to it.

Refer to **DHCP Server Configuration.pdf** for detailed instructions. This document is located in the `'Utilities\DHCP'` directory of the Command Centre installation files.

### Procedure

1. Click **Wizards** from the menu bar, then **Configuration Wizard**.
2. In the Configuration Wizard window, ensure that **Controller** is selected.
3. From Controller Wizard drop-down menu, select **Controller 6000**.
4. Click **Start**.

   The Controller details pop-up window displays.
5. In the Controller 6000 Wizard enter controller **Name**, **Short Name** (optional) and **Description** (optional).
6. Enter the Controller MAC Address in the **MAC** field.
7. Select **Single** or **Dual** as Ethernet Connection.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-960ad52e6e5aef1760e305032f03e80d4c22fbf0%2Fdhcp_c6000_wizard.png?alt=media)
8. Configure as required.

   <table><thead><tr><th width="153.4444580078125">If you want to enable DHCP for...</th><th>then...</th></tr></thead><tbody><tr><td>IPv4,</td><td>tick the <strong>Enable DHCP</strong> checkbox.<br>The <strong>IP Address</strong>, <strong>Subnet</strong> and <strong>Gateway</strong> fields deactivate.</td></tr><tr><td>IPv6,</td><td><ol><li>Tick the <strong>IPv6 Enabled</strong> checkbox.<br>The <strong>Network Prefix</strong> and <strong>Address</strong> fields activate.</li><li>Tick the <strong>Enable DHCPv6</strong> checkbox.<br>The <strong>Network Prefix</strong> and <strong>Address</strong> fields deactivate.</li></ol></td></tr><tr><td>IPv4 and IPv6,</td><td><ol><li>Tick the Enable <strong>DHCP</strong> checkbox.<br>The <strong>IP Address</strong>, <strong>Subnet</strong> and <strong>Gateway</strong> fields deactivate.</li><li>Tick the <strong>IPv6 Enabled</strong> checkbox.<br>The <strong>Network Prefix</strong> and <strong>Address</strong> fields activate.</li><li>Tick the <strong>Enable DHCPv6</strong> checkbox.</li></ol></td></tr></tbody></table>
9. Click **Next**.
10. Complete **Controller Details - Part Two**.
11. Click **Next** to add HBUS Devices to the Controller, otherwise click **Finish**.
12. Do you want to save this configuration as a template for future use?

    <table><thead><tr><th width="120">If...</th><th>then...</th></tr></thead><tbody><tr><td>yes</td><td><ol><li>Enter the template name in the <strong>Template Name</strong> field.</li><li>Enter the template description in the <strong>Template Description</strong> fields.</li><li>Select the <strong>Template Division</strong> from the drop-down menu.</li><li>Click <strong>Save</strong>, or <strong>Save As</strong> to save your template.</li></ol></td></tr><tr><td>no</td><td>click <strong>Finish</strong>.</td></tr></tbody></table>

    **Note:** For a detailed guide on creating a controller using the Wizard, refer to [Configuration Wizard](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/setting-up-your-site/wizards/configuration-wizard.md).


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-a-controller-for-dhcp/enabling-dhcp-for-a-new-controller-6000-using-the-wizard.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
