> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-a-controller-7000-or-7000-single-door-for-802-1x.md).

# Configuring a Controller 7000 or 7000 Single Door for 802.1x

### Introduction

802.1X is a widely used industry standard for network access control (NAC) and authentication. It is part of the IEEE 802.1 group of networking protocols and provides a mechanism for controlling access to a local area network (LAN) or a wireless network, enhancing network security by ensuring that only authorized users and devices can connect to the network.

Operators require the "Edit Site privilege to perform this procedure.

**Note:** The Secondary Ethernet port on a Controller 7000 Enhanced does not support 802.1x

***

### Configuration

The Controller is configured for 802.1x from the Controller Config Webpage, as follows:

1. Connect the Controller directly to your laptop.
2. Turn DipSwitch 1, 2 and 3 ON and restart the Controller.

   **Note:** If DipSwitch 2 is OFF, access to the 802.1x Configuration page is denied.
3. Open the Internet Browser.
4. In the **Address** field enter the Controller’s default IP Address followed by a forward slash, then **config**.

   See the example below for the correct format.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-879d4f6e42b2eb4142cdbb895804c69f2870c3de%2Faddress.png?alt=media)
5. Press the **Enter** key on your keyboard.

   The Enter Network Password screen displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fa02f4dbd0956da14bc6209763c0ca6b2bb28162%2Fdirectconnect16.png?alt=media)
6. Enter **config** for the 'User Name' (all in lower case), and **CardaxFT** for the 'Password'. You also have the option to 'Save this password in your password list'.
7. Click the **OK** button.

   The Gallagher Controller Configuration screen displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-48aadaace05e145e7de09767ffaa4c7a2817340e%2Fcontroller7000_webpage1.png?alt=media)
8. Select **Set Current Time**.

   The 'Time Manager Thread' page displays.
9. Set the Controller’s clock to use current time, and click the **Apply** button.
10. Select **802.1x Configuration**.

    The '802.1x Configuration' page displays.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7956a932fe456f66b46038b0e0b8b6825e4a324b%2Fcontroller7000_webpage2.png?alt=media)
11. Configure as required.

    <table><thead><tr><th width="150">Field / Button</th><th>Description</th></tr></thead><tbody><tr><td>Domain</td><td>This is the domain name of the computer where the Controller is connected to.<br>Valid characters are 0 to 9, a to z, A to Z, and -<br>(Default = blank)</td></tr><tr><td>Generate CSR</td><td>Clicking this button generates or re-generates CSR (Certificate Signing Request) along with the Controller’s private key. The generated CSR can then be submitted to a CA for signing. The CSR contains the MAC address (last 6 digits) as the identity of the Controller it is generated on.</td></tr><tr><td>EAP Mode</td><td>The drop-down list shows the following options:<br>Off = authentication using 802.1x standard is OFF<br>TLS = enables 802.1x with certificate-based authentication.<br>(Default = Off)</td></tr><tr><td>Identity</td><td>The identity used for authorisation. Accepts all characters including special characters. Cannot be left blank.<br>(Default = blank)</td></tr><tr><td>Server Certificate</td><td>This field is enabled when EAP mode = TLS. This is where you upload all the server certificates. The Server root certificate is required as a minimum.<br>(Default = No file chosen, disabled)</td></tr><tr><td>Client Certificate</td><td>This field is enabled when EAP mode = TLS. This is where you upload the certificate issued by the CA, based on the CSR.<br>(Default = No file chosen, disabled)<br><br><strong>Note:</strong> Error messages will display if the signed certificate is expired, doesn’t match the Private Key, or doesn’t contain a valid Subject Alternative Name (SAN) or Extended Usage extension as the CSR.</td></tr></tbody></table>
12. Click the **Apply** button.
13. Select **LAN Configuration**.

    The 'Ethernet LAN Configuration' page displays.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9eed6d1d1319fa877ff317d0f2fa2545f3135607%2Fserveraddress_webpage.png?alt=media)
14. You can use either DHCP or Static IP.

    <table><thead><tr><th width="266">If you select...</th><th>then...</th></tr></thead><tbody><tr><td>Automatic IP configuration (DHCP)</td><td>enter the DHCP Server address in the <strong>Server address</strong> field.</td></tr><tr><td>Static IP configuration</td><td>assign the Controller an IP by entering it in the <strong>IP address</strong> field.</td></tr></tbody></table>

    **Note:** Having Command Centre assign the Controller an IP Address via BOOTP is not supported in conjunction with 802.1x.
15. Click the **SAVE** button.
16. Turn DipSwitch 1, 2 and 3 OFF.
17. Swap the Controller on to 802.1x network and restart the Controller.
18. In Command Centre, click **Configure** from the menu bar, then **Hardware**.

    The **Hardware** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/tree-view.md)).
19. **Right click** and select **New\...Controllers** and the appropriate Controller type, (i.e. **Controller 7000** or **Controller 7000 Single Door** ).
20. Click the **Network** tab.

    The **General** sub-tab displays by default.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-bb60b44bc58b2fbd619b90735bf2b525066d859b%2Fcontroller7000_networktab.png?alt=media)
21. Which option did you select on the 'Ethernet LAN Configuration' page of the Controller Config Webpage?

    <table><thead><tr><th width="259">If you selected...</th><th>then click the...</th></tr></thead><tbody><tr><td>Automatic IP configuration (DHCP)</td><td><strong>Automatic (DHCP)</strong> radio button.</td></tr><tr><td>Statis IP configuration</td><td><strong>Manual</strong> radio button, and enter the IP address that you already set on the Webpage in the <strong>IP address</strong> field.</td></tr></tbody></table>
22. Click the **802.1x** sub-tab.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1b600ed96fae68491f8955a1d7d0098baed86a8a%2Fcontroller7000_networktab_802.1x.png?alt=media)

    **Note:** The controls will not be enabled on this tab is you haven’t yet configured the Controller for 802.1x on the Controller Config Webpage, and the following message will display in the lower part of the screen:

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9d17fa03d2ad922e1feaad549d3effdc1064ddcb%2Fcontroller7000_notconfiguredfor802.1x.png?alt=media)

    The controls will also be disabled if the Controller is offline, and the following message will display:

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-af0d938c404c198d973baf499bec6833712fc8b4%2Fcontroller7000_offlinemessage.png?alt=media)

### Result

A Controller has been configured for 802.1x.

The status message *"802.1x Enabled"* will display n the **Status and Overrides** tab indicating that it is configured and connected to 802.1x network.

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-19b2404b8198989d3676b3d56e69437cae68c83d%2Fcontroller7000_802.1xstatusmessage.png?alt=media)

If the Controller is configured but not connected to 802.1x network, then the status message will read *"802.1x Enabled - not connected to 802.1x network"*.

**Notes:**

* Controller 7000s already connected to Command Centre and online via a **non-802.1x authenticated port** can be updated to use 802.1x, as follows:

  <div data-gb-custom-block data-tag="hint" data-style="info" class="hint hint-info"><p><strong>Updating an existing install to 802.1x</strong></p><ol><li>Turn DipSwitches 1, 2 &#x26; 4 ON and restart the Controller.</li><li>Make sure the Controller is online with Command Centre.</li><li>Access the Controller's config page using it's assigned IP address.</li><li>Go to the '802.1x Configuration' page and configure the Controller for 802.1x and save.</li><li>Turn DipSwitch 1 and 2 OFF and DipSwitch 4 ON.</li><li>Swap the Controller on to 802.1x network, or configure port to require 802.1x and restart the Controller.</li><li>In Command Centre, check the Controller status updates to '802.1x - Enabled' on the Controller properties <strong>Status and Overrides</strong> tab.</li></ol></div>
* If you need to add new certificates or renew existing certificates to the Controller refer to [Adding new or renewing existing certificates to Controllers using 802.1x](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/adding-new-or-renewing-existing-certificates-to-controllers-using-802-1x.md) for the procedure.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-a-controller-7000-or-7000-single-door-for-802-1x.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
