> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware.md).

# Hardware

After all the equipment is physically installed on site you need to configure Command Centre to match.

You can add the devices (via the **Hardware** List Window), in any order. However, it is important you link them together to accurately represent your site.

**Note:** It is important that any System Divisions are formalised **prior** to the commencement of configuration work. See [System Divisions](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/system-division.md) for procedure.

You must have the correct operator privilege level to configure Gallagher Hardware. Refer to [Operator Privileges](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges.md).

***

Select the item below that you require further detail on:

* [Creating Controllers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers.md)
  * [Creating Controller 7000s or 6000s](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/creating-controller-7000s-or-6000s.md)
  * [Creating a Controller 7000 Single Door](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/creating-a-controller-7000-single-door.md)
  * [OneLink Configuration](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/onelink-configuration.md)
  * [Configuring Secondary Ethernet operation mode](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-secondary-ethernet-operation-mode.md)
  * [Configuring a Controller 7000 or 7000 Single Door for 802.1x](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-a-controller-7000-or-7000-single-door-for-802-1x.md)
  * [Adding new or renewing existing certificates to Controllers using 802.1x](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/adding-new-or-renewing-existing-certificates-to-controllers-using-802-1x.md)
  * [Upgrading a Controller 6000 to a Controller 7000](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/upgrading-a-controller-6000-to-a-controller-7000.md)
  * [Configuring DNS Servers for Controllers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-dns-servers-for-controllers.md)
  * [Configuring Offline Monitoring](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-offline-monitoring.md)
  * [Configuring a Controller for DHCP](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-a-controller-for-dhcp.md)
  * [Enabling DHCP for a new Controller 6000 using the wizard](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configuring-a-controller-for-dhcp/enabling-dhcp-for-a-new-controller-6000-using-the-wizard.md)
  * [Configurable Ports - NAT Solution](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-controllers/configurable-ports-nat-solution.md)
* [Creating Devices](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-devices.md)
* [Assigning Device Software to devices](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/assigning-device-software-to-devices.md)
* [Configuring EOL Resistors for devices](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/configuring-eol-resistors-for-devices.md)
* [Linking devices to Controllers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/linking-devices-to-controllers.md)
* [Creating Inputs and Outputs](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-inputs-and-outputs.md)
* [Linking Inputs and Outputs to devices](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/linking-inputs-and-outputs-to-devices.md)
* [Creating Readers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-readers.md)
* [Configuring HBUS Devices](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/configuring-hbus-devices.md)
* [Configuring an HBUS Keypad Reader](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/configuring-an-hbus-keypad-reader.md)
* [Configuring HBUS Terminals](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/configuring-hbus-terminals.md)
* [Configuring an HBUS Contact Card Reader](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/configuring-an-hbus-contact-card-reader.md)
* [Configuring an HBUS I/O Interface](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/configuring-an-hbus-i-o-interface.md)
* [Configuring an HBUS QuickSwitch Board](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/configuring-an-hbus-quickswitch-board.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
