> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors.md).

# Configuring Secure/Free Floors

The secure/free floor component of the Call Manager Interface enables an operator to either secure or free a floor.

<table data-header-hidden><thead><tr><th width="152.33331298828125"></th><th></th></tr></thead><tbody><tr><td>Secure:</td><td>A valid access card is required in order to gain access to the floor.</td></tr><tr><td>Free:</td><td>An access card is not required.</td></tr></tbody></table>

You will need to configure a virtual output for each floor you wish to secure. An operator can change the state of a floor to either secure or free by performing an override on the virtual output for the appropriate floor.

You will also need to configure an External System Item (Floor) for each floor you wish to secure. This item uses Schindler Time Patterns to reflect the true state of the floor. An operator can then observe the state of the floor from within Command Centre.

If the simulated terminal has not received the override command, the output state may differ from the External System Item state. The operator can then repeat the override action. If all is well, the virtual output state should be the same as the External System Item state.

Whenever Command Centre reconnects to Schindler (after being disconnected), all floor states are resent from Command Centre to Schindler. This helps to ensure all floor states in Schindler are correct.

### Configuration Process

Command Centre doesn't control the state of the floors directly. Instead Command Centre uses Schindler Special Operation Modes (SOMs) that control the Time Patterns assigned to the floors in Schindler. Therefore the proper functionality depends on the correct configuration of these Schindler items.

The following diagram provides an overview of the configuration process you will need to follow in order to secure/free floors. This process identifies the various items you will need to configure in both Command Centre and Schindler.

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1e0d78b2ea13bc0f22a9581f5cec81d97648b564%2Fschindler_securefloors1.png?alt=media)

**Notes:**

* This configuration process has been tested and is a suggestion as to how Schindler can be configured to secure/free floors. Your configuration of Schindler may vary, depending on your requirements.
* Schindler integrators should configure the Special Operations Modes, provide their names to Gallagher integrators.
* An additional configuration option (schindler\_zone\_status\_delay\_milliseconds) exists in the Schindler plugin configuration file 'SchindlerPlugin.config'. This option adds a delay between each zone change message/command sent from Command Centre to Schindler, to help mitigate queue overload. For details about the configuration file, refer to the document *"Release Note Schindler Call by Profile (v8.xx)"* located on the Command Centre installation media.

### Configuration Procedures

To configure secure/free floors, perform the following procedures in the order listed below.

**In Schindler:**

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring Time Patterns](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-time-patterns.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring Floor Access Requirements](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/configuring-floor-access-requirements.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring Special Operation Modes (SOMs)](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/configuring-special-operation-modes-soms.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring Dummy Users](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/configuring-dummy-users.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring Simulated Terminals](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/configuring-simulated-terminals.md)

**On the Middleware PC:**

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring the 'ReportTimePatterns' Registry](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/configuring-the-reporttimepatterns-registry.md)

**In Command Centre:**

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a Virtual Output for each Floor](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/configuring-a-virtual-output-for-each-floor.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Assigning each Virtual Output to an ESI (terminal)](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/assigning-a-virtual-output-to-an-esi-terminal.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a Site Plan for Secure/Free Floors](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors/configuring-a-site-plan-for-secure-free-floors.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/schindlerid/the-call-manager-interface-plugin/configuring-secure-free-floors.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
