> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/configuring-a-dvr-system.md).

# Configuring a DVR System

### Introduction

Command Centre can be integrated with Digital Video Recording (DVR) equipment and software from a range of manufacturers. For a list of all DVR Integrations currently supported by Command Centre, contact Gallagher Security Technical Support.

**Note:** The DVR Server PC must maintain synchronisation with the Command Centre Server at least once a day to ensure the stored image sequences can be accurately requested through Command Centre from the DVR Server. Synchronisation can either be of each other, (i.e. Command Centre Server and the DVR Server), or it can be configured to synchronise off a common source, (e.g. the Domain Controller or a known reliable time-clock source off the Internet).

To configure a DVR System, complete the following procedure:

**Note:** Operators require the "Edit Site" operator privilege to be able to add, modify and delete DVR Systems.

***

### Procedure

1. Click **Configure** from the menu bar, then **External Systems**.

   The **External Systems** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/tree-view.md)).
2. **Right click** and select **New\...DVR System**.

   By default the **General** tab displays.
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Event Response** tab, and configure as required.

   For further detail see [Event Response tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/event-response-tab.md).
5. Click the **Alarm Instructions** tab, and configure as required.

   For further detail see [Alarm Instructions tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/alarm-instructions-tab.md).
6. Click each tab in turn and configure the DVR system properties as required:

<details>

<summary>API Setup tab</summary>

1. Click the **API Setup** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-c84803ee13eeddb04ac58ea1f67312b7706bc7e5%2Fdvrsystem_apisetuptab.png?alt=media)
2. Select the appropriate **Controller** from the drop-down list.

   **Note:** If a Controller is selected, the **Server** field becomes compulsory.
3. Select the appropriate External System Server from the **Server** drop-down list.
4. Click the appropriate radio buttons in the "Identity" section of this screen.

   <table><thead><tr><th width="132">Radio Button</th><th>Description</th></tr></thead><tbody><tr><td>Unique</td><td>This radio button allows you to assign an identity string to this DVR System such that all FTCAPI communication related to this item will be tagged with the assigned identity.<br>This field is limited to a maximum of 64 characters.</td></tr><tr><td>Same as</td><td><p>This radio button allows you to link the identity of this DVR System to be the same as another.<br><br><strong>Notes:</strong></p><ul><li>At most, 100 External System Items can be assigned to an External System. By configuring multiple External Systems that are the same, you can negate this limitation.</li><li>If "Same as" is selected, the <strong>Configuration</strong> tab disappears, therefore go to Step 7.</li></ul></td></tr></tbody></table>

</details>

<details>

<summary>Configuration tab</summary>

1. Click the **Configuration** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-d27fd228d6f659ab20de5663444b236da280521a%2Fdvrsystem_configurationtab.png?alt=media)

   This screen allows you to assign a system type to this DVR System. The **System Type** drop-down list defaults to "Generic", and will only be populated with the supported middleware 'plug-in' system types it finds in your Command Centre license file.
2. Select the DVR middleware plug-in to be used, from the **System Type** drop-down list.

   **Note:** The "Configuration" section of this screen becomes populated according to the plug-in selected, (e.g. the following screen example demonstrates how the screen will look when the **Decentralised VMS** plug-in is selected). For instructions on how to configure your selected plug-in, refer to your DVR Integration release note, provided with your DVR plug-in files.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-21e96fa7abbf3d6a6210c18ad44273f029ff7c04%2Fdvrsystem_configurationtabexample.png?alt=media)
3. For the Decentralised VMS plug-in, specify the port range that Command Centre can use to listen for events generated by the Decentralised VMS cameras assigned as DVR Camera Items. Command Centre will pick the first available free port within this range. Range 1000 to 9999.

</details>

<details>

<summary>DVR Setup tab</summary>

1. Click the **DVR Setup** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-39c38b00b779d67ab3c5da017dca8a6d646923e1%2Fdvrsystem_dvrsetuptab.png?alt=media)
2. Enter the IP Address or DNS name of the DVR Server PC.
3. Enter the DVR Username and Password to log on to the DVR Server PC.
4. In the ‘Viewing Windows’ section select the preferred **Stored** and **Live** Video Viewer controls from the drop-down lists.

   These lists will only contain entries if the DVR System Integrator supplied software has been copied onto this workstation PC and registered with the operating system if necessary.

   The supplied software should be installed on all Command Centre workstations that will view DVR images.

</details>

7. Click the **Cameras** tab if you want to associate a DVR Camera(s) with this DVR System.

   For further details see [Cameras tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/cameras-tab.md).
8. Click the **Icons** tab if you want to change the Icon Set for this DVR System.

   For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
9. Click the **Notes** tab if you want to add a note(s) about this DVR system.

   For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
10. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

A new DVR System has been created and displays in the External Systems window under the 'External System Server', with no children.

**Note:** A new DVR System can be saved even if some of the properties are not entered however it will not function correctly until all the properties are entered.

***

### Editing and Deleting DVR Systems

Refer to [Editing items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/editing-items.md) and [Deleting items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/deleting-items.md) for procedures on how to edit and delete DVR Systems.

**Notes:**

* The DVR System will only allow deletion if it does not have any children, (i.e. no DVR Cameras referencing it).
* If an item is on a Site Plan, you will not be able to delete it until it is removed from the Site Plan.
* You will still be able to view old stored image sequences for a deleted DVR Camera from within Command Centre, by locating the sequence in the Find Tool. If you also delete the DVR System the camera was associated with, then you will no longer be able to view the old stored image sequence from within Command Centre. You will need to use the DVR manufacturer’s tool instead.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems/configuring-a-dvr-system.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
