> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-alarm-monitoring/setting-the-country-code.md).

# Setting the Country Code

### Introduction

The Country Code needs to be set for an Alarm Dialler. This is done once the Alarm Dialler has been physically connected to the Controller, (the Installation Note provided with the Alarm Dialler has instructions on how this is done), and preferably before you configure the Alarm Dialler in Command Centre.

There are two methods for setting the country code, therefore use the procedure applicable to your situation:

* via the Controller Diagnostics web page, or
* the modem can be connected via a serial cable

### Procedure

#### Setting the Country Code via the Web Page

1. Ensure DIP Switches 1 and 2 are set on the Controller.

   **Note:** The Controller 6000 will need to be power cycled with DIP Switch 2 on to allow access to the Controller Diagnostics web page.
2. Open the Internet Browser.
3. In the **Address** field enter the IP Address of the Controller followed by a forward slash, then **config** followed by a full stop. See the example below for the correct format.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-879d4f6e42b2eb4142cdbb895804c69f2870c3de%2Faddress.png?alt=media)

   Press the **Enter** key on your keyboard.

   The Enter Network Password screen displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fa02f4dbd0956da14bc6209763c0ca6b2bb28162%2Fdirectconnect16.png?alt=media)
4. Enter **config** for the 'User Name' (all in lower case), and **CardaxFT** for the 'Password'. You also have the option to 'Save this password in your password list'.
5. Click the **OK** button.

   The Gallagher Controller Configuration screen displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-444ee4dae99880d0f35cf29b2e4169efa708f028%2Fnullmodem_scrn5.png?alt=media)
6. Select **Dial-up Configuration**.

   The Dial-up Modem Configuration screen displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e742aebdd68b568d76d2c95e55d127d8d64913fe%2Fmodem7_html.png?alt=media)
7. Scroll down the web page to the **Modem Information** section.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-5c46ef874f3c6f56c1867a6c0a9b0b0e8861a9f1%2Fmodem4_html.png?alt=media)
8. Specify the modem information string you wish to query, by clicking the drop-down menu list box and selecting the appropriate string.
9. Click the **Query Information** button.

   The following screen shot shows an example of the query results that display:

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-73d6ed57dd01072058abcc86e04e3188050fceb8%2Fmodem2a_html.png?alt=media)

   The results of this query show the level of the firmware on the socket modem. This query is used mostly for diagnostic purposes, therefore it is not essential that you perform this step.

   If however the Modem has not been connected to the Controller correctly, *"No Response"* displays in the query results.

   If you query the Modem when the Alarm Dialler is using it, *"Alarm Dialler is using modem. Try again later"* displays in the query results.
10. Scroll down the web page to the **Modem Country** section.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-92af62cebabad56890dbbf31df66fead13b7d099%2Fmodem5_html.png?alt=media)

    This section of the web page displays all the countries that the modem supports.
11. Click the **Query Country Code** button.

    The current country setting displays.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-116848baafd528a6c6d512cb69eee24afc16d3a1%2Fmodem6_html.png?alt=media)

    **Note:**

    In the example above the Country Code currently set is 09 New Zealand, therefore you would not need to re-set the Country Code if in New Zealand.
12. If you do require a different country setting from the one currently set, click the drop-down menu list box to display all the Country Codes, and select the Country Code you require. See [Country Codes](https://help.security.gallagher.com/knowledge-hub/configuration-client/appendices/country-codes.md) for details of all country codes supplied.

    **For example:**

    The following screen shot shows 01 Australia selected in the drop-down menu list list box.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9b8a77c6a26a8b2a7275221e8db9180b59fe4c6d%2Fmodem9_html.png?alt=media)

    When the **Set Country Code** button is clicked, the Country Code changes (in the following screen example it changes from 09 to 01) and the message in the drop-down menu list box reverts back to "Select Country".

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fec4e459addf60dcce1d3ad0c4f929c54efec926%2Fmodem10_html.png?alt=media)
13. Click the **Set Country Code** button.

### Result

The Country Code has been set for the Alarm Dialler.

### Next

[Configuring an Alarm Dialler](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-alarm-monitoring/configuring-an-alarm-transmitter-dialler.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-alarm-monitoring/setting-the-country-code.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
