> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/low-level-interface-elevator-cars/configuring-elevator-cars.md).

# Configuring Elevator Cars

### Introduction

This procedure enables an operator with the "Edit Site" operator privilege to configure an Elevator Car.

***

### Configuration

To configure an Elevator Car, perform the following procedures in Gallagher Configuration Client:

1. Click **Configure** from the menu bar, then **Elevator Cars**.

   The **Elevator Car** List Window opens (in [grid view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/grid-view.md)).
2. **Right click** and select **New\...Elevator Car**.

   By default the **General** tab displays.
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click each tab in turn and configure the Elevator Car properties as required:

<details>

<summary>Connections tab</summary>

1. Click the **Connections** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-d8c06f520b0808e15bd83aaed3f4c5f1d63a8120%2Felevatorcar_connections.png?alt=media)
2. Enter the Controller for this Elevator Car.

</details>

<details>

<summary>Readers tab</summary>

1. Click the **Readers** tab.
2. Enter the Readers for this Elevator Car.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-11c78aa07d50bcac3b3097ac5e5c58d6d00f0ac2%2Felevatorcar_readers.png?alt=media)

   **Note:** Readers installed in the elevator car HLI function similar to the elevator reader at which the Cardholder badges. E.g. An elevator car HLI has readers A and B. The Cardholder badges at reader A. If the Cardholder is prompted to select a floor, reader B will also prompt for an input simultaneously. Therefore, floor selection can be made from either readers' location.
3. Check the **Disable reader feedback** checkbox if required.

   If this option is checked, then the elevator cars reader will not display prompts, icons, LEDs, or make access granted or access denied sounds when access attempts are made at the reader.

   **Note:** When checked, this option has the effect of disabling any feature that requires reader feedback, (e.g. PINs, Code or Card mode, local overrides).

</details>

<details>

<summary>Floors tab</summary>

1. Click the **Floors** tab.

   There are 75 slots available for floor data to be entered.
2. Start at the "top" slot on this screen by clicking the mouse button at the top of the white area.

   The first slot is highlighted and the fields across the bottom of the window are no longer greyed out.

   **Note:** Elevator Floors should be entered in descending order, (i.e. the top floor down to the lowest floor).

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-01caa2a43d5ff8f6c0d6092bf82102a09cf4b263%2Felevatorcar_floors.png?alt=media)
3. Enter the Name of the floor, (i.e. usually what is embossed on the elevator button in the elevator car, e.g. floor number, G for Ground, B for Basement, etc.) in the first field at the bottom of the screen.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-4b91bc899193b414849fe5d924381081b6050f34%2Flcfloors1.png?alt=media)

   **Note:** Floor names are limited to four characters.
4. Click in the first field with an arrow box ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f8bc79a81516a4f8d7caf998200c84b551910a24%2Fdownarrow.png?alt=media), and select the [Access Zone](https://help.security.gallagher.com/knowledge-hub/configuration-client/glossary-of-terms.md#access-zone) that represents the area outside the elevator on this particular floor, from the drop-down list.
5. Click the next field and select the "Floor Select" output from the drop-down list.

   In Elevator Car configuration, outputs are used to activate the floor buttons, (i.e. enables the button to be used).
6. Click the last field and select an input to remove wait states, if required.

   This Input will cancel the wait state (as configured on the **Advanced** tab in the "Floor select timeout" field), for inputting or pressing a floor button. Once a cardholder badges their card there is normally an active wait state allowing time for the cardholder to select (push) the required floor button. The Inputs are used to deactivate all the floor buttons again, as soon as one has been pushed. This stops another person in the elevator-car pushing another floor button, that they should not have access to while the floor buttons are in an active state.

   Adding an Input to each floor button also provides a more precise audit trail of cardholder movement throughout a building. An Activity Report will show which button each cardholder pushed in the elevator car, indicating which floor (or access zone) they most likely entered.
7. Repeat Steps 2.-6. for each floor you need to create.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ef303f44f8e706faaa45a5f5456113eb4773abe5%2Felevatorcar_floors2.png?alt=media)

   **Note:** Should you need to delete a floor, highlight the floor, then clear the Name field at the bottom of the window and set all the other fields to --None Selected--. This may result in a gap in the list of 75 floors available. This does not matter however, as the choice of which slots are used does not affect the operation of the Elevator Car, nor does the order of the slots matter.

</details>

<details>

<summary>Advanced tab</summary>

1. Click the **Advanced** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7cd434acaaf7fe40881cae2bb5b2a859830cded4%2Felevatorcar_advanced.png?alt=media)
2. Change the Advanced Settings as required.

</details>

5. Click the **Cameras** tab if you want to associate a DVR Camera(s) with this Elevator Car.

   For further details see [Cameras tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/cameras-tab.md).
6. Click the **Icons** tab if you want to change the Icon Set for this Elevator Car.

   For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
7. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Elevator Car.

   For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
8. Click the **Notes** tab if you want to add a note(s) about this Elevator Car.

   For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
9. Click **OK** to exit and save your changes.

   Click **Cancel** to exit without saving your changes.

   Click **Apply** to save your changes and stay in this window.

### Result

An Elevator Car is configured.

***

### Editing and Deleting Elevator Cars

Refer to [Editing items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/editing-items.md) and [Deleting items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/deleting-items.md) for procedures on how to edit and delete Elevator Cars.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/low-level-interface-elevator-cars/configuring-elevator-cars.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
