> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/configuring-high-level-elevator-interfaces.md).

# Configuring High Level Elevator Interfaces

### Introduction

This procedure enables an operator with "Edit Site" privilege to configure an Elevator HLI. Before carrying out this procedure ensure you have created the Controller that hosts the high level elevator interface. Refer to Creating Controllers.

### Procedure

1. Click **Configure** from the menu bar, then **Hardware**.

   The **Hardware** List Window opens.
2. **Right click** and select **New\...RS232 Devices** > **Elevator HLI**.

   By default the **General** tab displays.
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Advanced** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f76d09b1a778104e95d7cd69d907bd89cb02f356%2Felevatorhli_advancedtab.png?alt=media)
5. Enter the Offline timeout. A time between 30 and 120 seconds can be entered. After sending a command frame, Command Centre will wait for this period of time for a response from the elevator system. If no response is received it is assumed that communication with the elevator system has been lost and an alarm (or event) is generated. The status of the Elevator HLI changes to offline.

   **Note:** If you are configuring the Kone ELI Elevator HLI feature, set the **Offline timeout** to at least 60 seconds.
6. Select the elevator system **Protocol** you require from the drop-down list.

   **Note:** The protocols that appear in the list will depend on what elevator system protocols your site is licensed for.
7. The **Additional configuration** field provides a means of altering manufacturer specific properties of the Elevator HLI that can vary between installations of an elevator system. It should only be configured on advice from Gallagher Group Limited.

   Refer to [Supported elevator systems - Additional Configuration and Troubleshooting](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/supported-elevator-systems-additional-configuration-and-troubleshooting.md) for further information on the parameters that can be entered for different elevator system protocols.
8. Click the **Icons** tab if you want to change the Icon Set for this Elevator HLI.

   For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
9. Click the **Notes** tab if you want to add a note(s) about this Elevator HLI.

   For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
10. Click **Apply**.
11. Return to the **Hardware** List Window, and **right click** on the Controller that will host this Elevator HLI and select **Properties**.
12. Click the **Serial Devices** tab.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-3aafc3a4693dbf46e3fd682f2e0a41f9d199685e%2Fcontserialdev1.png?alt=media)
13. Select the Elevator HLI you have just created from the drop-down list.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-c29166e5c5f4956ad0fab9fe2f218b9976c891a9%2Fcontserialdev2.png?alt=media)

    **Note:**

    * The Controller can communicate with either an Alarm Dialler or an Elevator HLI, but not both, using the Controller serial port connection.
    * The link between the Elevator HLI and the Controller that hosts it is configured in the Controller properties, Serial Devices tab and is then displayed (but is not editable) on the Connections tab of the Elevator HLI.
14. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

An Elevator HLI is configured.

### Hint

{% hint style="info" %}
**Editing and Deleting Elevator HLIs**

Refer to [Editing items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/editing-items.md) and [Deleting items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/deleting-items.md) for procedures on how to edit and delete Elevator HLIs.

**Note:** The system will not allow you to delete an Elevator HLI if it is associated with an Elevator Car HLI.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/configuring-high-level-elevator-interfaces.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
