> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars.md).

# High Level Interface Elevator Cars

### Introduction

Access from elevator cars can be controlled using a high level interface (Elevator HLI) between a Controller and the elevator control system. Alternatively, access from elevator cars is controlled using outputs from the Command Centre system to enable or disable specific elevator floor select buttons within an elevator car. Each method requires different configuration.

This section deals with configuring elevator cars that are controlled via a high level interface. If you are using outputs to control access to floors from within elevator cars refer to [Elevator Cars](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars.md).

### Licensing

The following license entries apply to the Command Centre Elevator HLI feature:

<table><thead><tr><th width="228">Licence</th><th>Description</th></tr></thead><tbody><tr><td><code>[Limits]</code><br><code>HLI Lift Cars=X</code></td><td>Where <code>X</code> is the maximum number of high level interface elevator cars (Elevator Car HLIs) that can be created. Once the maximum number has been reached the option to create additional Elevator Car HLIs will be disabled.</td></tr><tr><td>Kone – This integration is not licensed</td><td>Command Centre supports the Kone Protocol v2.5 communications protocol. This interface is a non-licensed feature of Command Centre. Communication is via the RS232 serial port on the Controller.</td></tr><tr><td>Otis - This integration is not licensed</td><td>Command Centre supports the Otis E.M.S - Security/B.M.S Protocol, Otis Ref No. 51646B. This interface is a non-licensed feature of Command Centre. Communication is via the RS232 serial port on the Controller.</td></tr><tr><td><code>[Features]</code><br><code>ThyssenKruppHLI=1</code></td><td>Is required when integrating the ThyssenKrupp elevator system with Command Centre. Communication is via the RS232 serial port on the Controller.</td></tr><tr><td><code>[Features]</code><br><code>OtisCompassHLI=1</code></td><td>Is required when integrating the Otis Compass Destination Management System with Command Centre. Communication is via TCP/IP but the integration will use the RS232 serial port on the Controller.<br>For information on how to install and configure this integration, refer to the document <em>"Release Note Otis Compass HLI (v7.60).pdf"</em> located in the Utilities\System Interfaces\OtisCompassHLI folder of the Command Centre installation files.</td></tr><tr><td><code>[Features]</code><br><code>OtisModbusHLI=1</code></td><td>Is required when integrating the Otis Modbus elevator system with Command Centre. Communication is via the RS232 serial port on the Controller. This integration requires an RS232 to RS485 converter.</td></tr><tr><td><code>[Features]</code><br><code>SchindlerHLI=1</code></td><td>Is required when integrating the Schindler elevator system with Command Centre. Communication is via the RS232 serial port on the Controller.<br><br><strong>Note:</strong> This is a separate integration to that of the SchindlerID integration. The SchindlerID integration synchronises the Command Centre cardholder database with the SchindlerID user database via TCP/IP.</td></tr><tr><td><p><code>[Features]</code><br><code>KoneELI=1</code><br>If the KoneRCGIF plugin is required, the following licence entries are also required:</p><p><code>[Limits]</code><br><code>Event Sources=X</code></p><p><code>[Plugin]</code><br><code>PluginX=KoneRCGIF</code></p></td><td>Is required when integrating the Kone ELI elevator system (Kone Socket Based Destination Call Giving Interface Specification Rev 1.5.1 829390) with Command Centre. Communication is via TCP/IP but the integration will use the RS232 serial port on the Controller.<br>Optionally, the Kone Remote Call Giving Interface (RCGIF) plugin enables a tenant to direct an elevator car to the tenant’s floor for a visitor. Please contact Gallagher Technical Support for obtaining the Kone RDGIF plugin.</td></tr><tr><td><p><code>[Limits]</code><br><code>SchindlerID Systems=X</code><br>If using SchindlerID plugins the following licence entries are required:<br><code>[Plugin]</code><br><code>PluginX=SchindlerID-LifeReporting</code></p><p><code>PluginX=SchindlerID-CallInterface</code></p></td><td>Is required when integrating Command Centre with SchindlerID v1.3.369.1<br>Where n is the maximum number of SchindlerID Systems that can be created. Once the maximum number has been reached the option to create additional SchindlerID Systems will be disabled. A SchindlerID System integrates the Command Centre cardholder database with the Schindler user database via TCP/IP. Refer to <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/external-systems.md">External Systems</a> for further details.<br>Optionally, the SchindlerID Life Reporting plugin enables Command Centre to build an audit trail for lift access events.<br>Optionally, the SchindlerID Call Interface plugin is required if you are using Gallagher readers on elevator terminals and are controlling a floor’s secure/free state from Command Centre.</td></tr></tbody></table>

Select the item below that you require further detail on:

(Refer to [Operator Privileges](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/operator-privileges.md) to check you have the correct operator privilege level for the activity you wish to perform.)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Understanding the High Level Elevator Interface](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/understanding-the-high-level-elevator-interface.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Performance](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/performance.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring High Level Elevator Interfaces](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/configuring-high-level-elevator-interfaces.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a Floor Arrangement](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/configuring-a-floor-arrangement.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring an Elevator Car HLI](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/configuring-an-elevator-car-hli.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Copying a Elevator Car](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/copying-an-elevator-car.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Performing executive overrides](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/performing-executive-overrides.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Supported elevator systems - Additional Configuration and Troubleshooting](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars/supported-elevator-systems-additional-configuration-and-troubleshooting.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/elevator-cars/high-level-interface-elevator-cars.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
