> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/calendars/assigning-days-to-day-categories.md).

# Assigning Days to Day Categories

### Introduction

The following procedures enable you to assign days to Day Categories.

**Note:**

Individual dates, (e.g. Monday 25 October) can be assigned to Day Categories on any Calendar, whereas particular days, (e.g. All Saturdays) can be assigned to Day Categories only on the Default Calendar.

### Procedure

#### Assigning particular days to Day Categories

1. Click **Configure** from the menu bar, then **Calendars**.

   The **Calendar** List Window opens (in [grid view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/grid-view.md)).
2. **Right click** on the Default Calendar, and select **Properties**.
3. Click the **Day Category Allocation** tab.
4. **Right click** on the Day name.
5. From the displayed pop-up menu, select the required Day Category.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ab96cc45ffc35bb364f1d626f71790310ef636a8%2Fselectdaycat.png?alt=media)
6. Click **OK** to exit and save your changes.

   Click **Cancel** to exit without saving your changes.

   Click **Apply** to save your changes and stay in this window.

#### Assigning individual dates to Day Categories

1. Click **Configure** from the menu bar, then **Calendars**.

   The **Calendar** List Window opens (in [grid view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/grid-view.md)).
2. **Right click** on the appropriate Calendar, (i.e. either the Default Calendar or a Special Calendar), and select **Properties**.
3. Click the **Day Category Allocation** tab.
4. Either:

   * **Right click** on the specific date.

     From the displayed pop-up menu, select the required Day Category.

     ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-df55d63182ef447a37e50d0d1f5d46bf3b87663a%2Fresetdaycat.png?alt=media)

   OR:

   * Click on the specific date.

     From the **Select Day Category** drop-down list ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-b80d246ec2d7e26ab257870decbb9f8a08661d41%2Fselectdropdown.png?alt=media) select the appropriate Day Category.
5. Click **OK** to exit and save your changes.

   Click **Cancel** to exit without saving your changes.

   Click **Apply** to save your changes and stay in this window.

### Result

The day(s) selected change colour to reflect the colour you assigned to that Day Category.

**Notes:**

* How individual dates display once assigned to a Day Category depends on the type of Calendar used.

  <table data-header-hidden><thead><tr><th width="80.111083984375"></th><th></th></tr></thead><tbody><tr><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-d59572fb95017947f3ee46c91a03af83cf0a9df4%2Fdate1.png?alt=media" alt=""></td><td>A special day will display like this in the calendar it was defined in.</td></tr><tr><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fc3465e7fd52cdaaaf71e49e2f200f2e52cf078e%2Fdate2.png?alt=media" alt=""></td><td>A special day defined in the default calendar will display like this in a special calendar, but cannot be edited or 'Reset to Default' from the special calendar.<br></td></tr></tbody></table>
* There is a limit of 400 special days in the default calendar and 400 in each special (regional) calendar. This allows a total of 800 special days to be defined for any one special calendar. When the limit is reached, the system will remove special days in the past without warning, until all newly selected days can be added. If all special days in the past have been removed and the limit is still exceeded, the extra newly selected days will not be added and a warning message will display.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/calendars/assigning-days-to-day-categories.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
