> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/alarm-zones/adding-multiple-items-to-alarm-zones.md).

# Adding multiple items to Alarm Zones

### Introduction

This procedure allows an operator with the "Bulk Change" privilege to add multiple Command Centre items to an Alarm Zone.

There are three methods of performing this procedure. You can either use:

* the **Add Items** button on the **Connections** tab of the Alarm Zone properties, or
* the General Change Wizard, or

  **Note:** For this method refer to [Initiating a new Alarm Zone Bulk Change](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/bulk-changes/initiating-a-new-alarm-zone-bulk-change.md) for the procedure.
* the context menu option available from an items List Window or from the Find Tool search results.

  Using this method, you select the items that are to be added to an Alarm Zone, **right click** and select **Bulk Change of Alarm Zone** from the context menu.

  The "Change Alarm Zone" screen of the Bulk Change of Alarm Zone Wizard displays.

  Select the new Alarm Zone to be assigned to the items from the drop-down list, and go to Step 6 in the following procedure to complete a bulk change of alarm zone using this method.

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-cf66dbc88650a6f70150074579f662d414d022cb%2Falarmzonebc_contextmenu.png?alt=media)

### Procedure (using the 'Add Items' button)

1. Click **Configure** from the menu bar, then **Alarm Zones**.

   The **Alarm Zone** List Window opens (in [grid view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/grid-view.md)).
2. **Right click** on the required Alarm Zone, and select **Properties**.
3. Click the **Connections** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-473c673991dce81c1027401d5b5db104388b4f98%2Falarmzone_connections.png?alt=media)
4. Click the **Add Items** button.

   **Note:** The **Add Items** button will only be enabled if you have the "Bulk Change" operator privilege.

   The "Select Items" screen of the Bulk Change of Alarm Zone Wizard displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-09fbb570d06df40e0b08c7b6fe9009740d92789d%2Falarmzonebc_wizard1.png?alt=media)
5. Place all the items to be added to the Alarm Zone onto this screen, by dragging and dropping them from the appropriate List Window, or by using the Find Tool.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-58a8128df52e2eb3bd2a954f575f5d09144faef7%2Falarmzonebc_wizard2.png?alt=media)
6. Click the **Start** button.

   The "Applying Changes" screen of the Bulk Change of Alarm Zone Wizard displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-c446a9ef3edddb023a5fb5cd8e6c799609707040%2Falarmzonebc_wizard3.png?alt=media)

   This screen shows the progress of the bulk change.

   While this screen displays, the bulk change will appear in the **Bulk Changes** List Window with a system-generated name. While in progress, the status of this bulk change will show as 'Active' in the **Bulk Changes** List Window, and if it completes successfully it will show as 'Successful', at which time the system will delete it.

   **Note:**

   While a Bulk Change of Alarm Zone is active, or if it fails, it will remain in the **Bulk Changes** List Window until an operator deletes it.

### Result

A Bulk Change of an Alarm Zone has been initiated, and the selected items have been added to the Alarm Zone.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/alarm-zones/adding-multiple-items-to-alarm-zones.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
