> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/access-zones/anti-passback/configuring-anti-passback.md).

# Configuring Anti-passback

### Introduction

This procedure describes how to enable anti-passback, set the 'auto-forgive' timeout and select an 'auto-forgive-all' time for an Access Zone.

You must have the "Edit Site" operator privilege, and be in the same Division as the Access Zone (or a parent Division).

### Procedure

1. Click **Configure** from the menu bar, then **Access Zones**.

   The **Access Zone** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/tree-view.md)).
2. Highlight the Access Zone you want to configure anti-passback for.
3. **Right click** and select **Properties**.
4. Click the **Advanced** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ab96f911303f0269612df10d96e47f6ecaeb6c78%2Faczone_ap.png?alt=media)
5. Configure the Anti-passback properties as required.

   <table><thead><tr><th width="258">Checkbox</th><th>Description</th></tr></thead><tbody><tr><td>Anti-passback enabled</td><td>When checked, the Controller will maintain a list of the Cardholders that are currently within the Access Zone. If the Access Zone is part of an Access Zone Group, then only one "in zone" list is maintained for the Master Zone of the Access Zone Group.<br>The <strong>Use single Controller</strong> checkbox becomes enabled and a new <strong>Anti-passback</strong> tab appears.</td></tr><tr><td>Check for tailgating on exit from zone</td><td>When checked, the Controller will maintain an "out of zone" list of Cardholders for the Access Zone. If the Access Zone is part of an Access Zone Group, then only one "out of zone" list is maintained for the Master Zone of the Access Zone Group.<br>The <strong>Strict Anti-tailgating enforcement</strong> and <strong>Use single Controller</strong> checkboxes become enabled and a new <strong>Anti-passback</strong> tab appears. See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/access-zones/configuring-strict-anti-tailigating.md">Configuring Strict Anti-tailgating</a> for further detail.<br><br><strong>Note:</strong> While this is configured here on the Access Zone, the anti-tailgating response is configured on the Access Group.</td></tr><tr><td>Use single Controller</td><td>When checked, the <strong>Controller</strong> selection box becomes enabled so you can select a single Controller to store the "in zone" and "out of zone" lists on.<br><br><strong>Note:</strong><br>This helps with performance for sites that require anti-passback on Access Zones with high throughput at specific times.</td></tr></tbody></table>

   **Note:**

   If you want to configure zone counting for this Access Zone also, refer to [Enabling Zone Counting](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/access-zones/enabling-zone-counting.md) for the procedure.
6. Click the **Anti-passback** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-c4e5c4c1449d19f33fc9f8459f57ae5103e613a8%2Faczone_ap2.png?alt=media)

   **Note:**

   If this Access Zone is a Master Zone for an Access Zone Group, then the properties configured here will apply to all Access Zones in the group.
7. If required, check the **Auto-forgive after** checkbox and enter the appropriate time (in minutes) in the Time box ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-69eaefeeadb83a8ab63b49fe9f1323f4e9b54da1%2Ftimebox2.png?alt=media). This will allow an authorised cardholder to re-enter the anti-passback zone after the time set, even though they have not made a valid exit from that zone. The **Auto-Forgive** time starts from the time of valid entry, (i.e. if it is set to 3 minutes and a cardholder presents their credential after 3 minutes from the original valid entry, they will be allowed back in the zone).
8. If required, check the **Auto-forgive-all at** checkbox and enter the appropriate time in the Time box ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ec76d44e8c4fd0ff6a7720046da4f10ec6627d60%2Ftimebox.png?alt=media) using the 24 hour clock.

   This will allow all authorised cardholders to re-enter the anti-passback zone after the time of day indicated, regardless of any previous anti-passback restrictions.

   **Note:**

   Anti-passback continues operating as normal after the time indicated.
9. The **Auto-Forgive on Exit from Site** section is used to list all the Door(s) that a cardholder can exit the site through, and they will be forgiven anti-passback violations and registered as "out of zone".

   Open the **Door** List Window and highlight the door(s) you want to be used by this Access Zone and drag and drop them into the **Auto-forgive on Exit from Site** grid.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-d3532ebe5810fcec2e02ad790ba7291939857b98%2Fdoorintoaz.png?alt=media)
10. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

Anti-Passback has been configured for the Access Zone.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/access-zones/anti-passback/configuring-anti-passback.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
