> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/visitor-management-barcode-scanner-process/software-required-for-barcode-scanner-support/zebex-z-5652-barcode-scanner.md).

# Zebex Z-5652 Barcode Scanner

### Prerequisite

You will need to print a hardcopy of this topic to be able to physically scan the various barcodes shown below, at the Zebex Z-5652 Barcode Scanner you are installing.

### Procedure

Install and configure the Zebex Z-5652 Barcode Scanner on all workstations that run the Visitor Management Client or Kiosk, as follows:

1. Connect the driver USB to computer port.
2. For Windows XP, install the attached VCOM Driver ( **VCOM\_Driver\_Installation\_v1.0.0.1.zip** ) located in the `'Utilities\Visitor Management Drivers\ Zebex Drivers'` folder of the Command Centre installation files.

   **Note:** This step is not necessary for Windows 10.
3. Install the OPOS Driver ( **ZOPOS\_V3.2.0.0\_Setup.zip** located in the `'Utilities\ Visitor Management Drivers\Zebex Drivers'` folder of the Command Centre installation files.
   1. Extract file ZOPOS\_V3.2.0.0\_Setup file to local PC or VM.
   2. Run **ZOPOS\_V3.2.0.0\_Setup.exe**

      The 'Welcome' screen of the OPOS Service Control Setup Wizard displays.
   3. Click the **Next** button.

      The 'Select Destination Location' screen displays.
   4. Click the **Next** button.

      The 'Ready to Install' screen displays.
   5. Click the **Install** button.

      The 'Completing the OPOS Service Control Setup Wizard' screen displays.
   6. Click the **Finish** button to close the Installer.
4. Scan the following barcodes in the sequence below to configure the scanner to USB-Serial Mode.

   **Note:** As you scan each individual barcode, you may need to cover the others to ensure they each get read correctly.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-88eb78cb5a9d9421f21547f8940311d07a276ac5%2F39812.png?alt=media) ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1ee2e7f330b9603b2151850c52c81175bf49bd47%2F39813.png?alt=media) ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-135204bf3b23919f1610cc5f752ad7a1ffa0fcf2%2F39814.png?alt=media) ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-affec9d3e3557399c3b004c5f7c74d7e8ff9f106%2F39815.png?alt=media)
5. Go to `'C:\Program Files (x86)\OPOS Service Control V3.2.0.0'` and run **ConfigOPOS.exe**

   The 'ZOPOSConfig 3.2.0.0' dialog displays.
6. Select the related COM **Port** (which is what shows for this device in Device Manager as shown below).
7. To create a new scanner, click the **New** button.

   The 'Create a new device...' dialog displays.
8. Enter the **Device Name** and select the "2D Scanner \[USB]" from the **Scanner Type** drop-down list.
9. Click the **OK** button.

   The scanner setup is complete.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/visitor-management-barcode-scanner-process/software-required-for-barcode-scanner-support/zebex-z-5652-barcode-scanner.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
