> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup.md).

# Configuring Visitor Management setup

### Introduction

The configuration for a Reception is defined against a division. If your site has a single Reception this will be configured on the **Visitor Division** (created earlier for assigning available visitors for a visit). For all other setups refer to [Configuration Examples](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuration-examples.md) to determine which division the Receptions should be configured on.

The configuration of a Reception determines the following options:

* Visitor Types available
* Visitor fields available: Visitor First Name, Visitor Last Name, Escort, Contacts, Notes, Personal Data Fields applicable to the Visitor Type
* Host Types (Meeting With) available
* Badge Texts available
* Access (access groups) available
* Actions available: Send Invitation, Sign In, Print badge, Assign access card, Assign escort, Mark On-Site, Mark Temp Off-Site and Mark Off-Site (Leave Site)
* Overdue grace period
* Time zone for a Reception
* Home screen columns and timeframe shown
* 'Find' screen columns
* Macros.

### Operator Privileges

<table><thead><tr><th width="228">Privilege</th><th>is required to...</th></tr></thead><tbody><tr><td>“Configure Site” or “View Site”</td><td>view this page.</td></tr><tr><td>"Configure Site"</td><td>edit properties.</td></tr><tr><td>"View Access Groups"</td><td>view the <strong>Visitor Types</strong> tab.</td></tr><tr><td>"View Cardholders"</td><td>see PDF's on the <strong>Visitor Fields</strong> tab and the <strong>Visit Fields on Visit</strong> tab.</td></tr><tr><td>"View Site"</td><td>see macros on the <strong>Home Screen Macros</strong> tab.</td></tr></tbody></table>

### Procedure

1. Click **Configure** from the menu bar.
2. Click **Divisions**.

   The **Division** List Window opens.
3. **Right click** on the "Visitor Division", and select **Properties**.
4. Type in the Name and Description.
5. Click the **Visitor Management** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-93a50624c61884ba1d8cef00bda11e8fb2e47cbb%2Fdivision_visitormgmttab.png?alt=media)

   This screen is split into two sections. The top section allows you to set the time zone and which Division’s configuration to use in the Visitor Management application. The lower section of this screen has nine tabs for configuring the different features of the Visitor Management application.
6. Complete the fields in the top section as required:

   <table><thead><tr><th width="228">Field / Button</th><th>Description</th></tr></thead><tbody><tr><td>Time Zone</td><td><p>A drop-down list of all the time zones that are installed on the computer. The time zone selected should be the one that receptions in this division are situated in.</p><p><strong>Note:</strong> You can create visits for Receptions in different time zones.</p><p>(Default = The computer's time zone)</p></td></tr><tr><td>Use Parent Division's Configuration</td><td><p>Click this radio button if the parent division's Visitor Management configuration is to be used.</p><p>(Default = Checked if the division is not the Root division)</p><p><strong>Note:</strong> When checked, the configuration options on all the other tabs on this screen are disabled, as the properties will be defined on the Parent Division.</p></td></tr><tr><td>Use this Division's Configuration</td><td><p>This radio button should be set if this division's division Visitor Management configuration is to be used.</p><p>(Default = Checked if the division is the Root division)</p></td></tr><tr><td>Copy From</td><td>This button copies the configuration from the division selected from the Source division drop-down list, preventing you having to repeat the set up.</td></tr><tr><td>Source Division</td><td>A drop-down list which allows the selection of a division. This is only available if the <strong>Use this Division's Configuration</strong> radio button is checked.</td></tr></tbody></table>
7. Which radio button did you select?

   <table><thead><tr><th width="228">If the...</th><th>then...</th></tr></thead><tbody><tr><td>Use Parent Division's Configuration</td><td>no further Visitor Management configuration is required, as this will be defined on the Parent Division.</td></tr><tr><td>Use this Division's Configuration</td><td><p>the <strong>Visitor Types</strong> grid on the lower section of this screen is enabled.</p><p>Go to Step 8.</p></td></tr></tbody></table>
8. Click **Manage** from the menu bar, then **Access Groups**.

   The **Access Group** List Window opens.
9. Select the Visitor Type Access Group that is applicable for the Reception(s) that are in this division, and drag and drop them into the **Visitor Types** tab, under the "Visitor Type" column.

   The Visitor Type(s) you include here will appear on the **Visit** screen for the Reception in the Visitor Management application.

   **Note:** The ‘Root Division’ is the exception, as it is envisaged it will not be used for Visitor Management configuration.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-a0a772d5c7b7940207a852830d4542988ca1d1ae%2Fagintovisitortypes_subtab.png?alt=media)
10. Close the **Access Group** List Window.
11. Select (highlight) a Visitor Type Group if you want to assign a Visitor Badge Card Type to this group, (i.e. if using the 'Print Badge' action).
12. Click **Configure** from the menu bar, then **Card Types**.

    The **Card Type** List Window opens.
13. Select the required Visitor Badge Card Type, and drag and drop it into the **Visitor Types** tab, under the "Visitor Badge Card Type" column.

    The Visitor Badge Card Types you include here specify the badge layout to be used for the visit for that Visitor Type.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-67495c67184039f33cb6ca5867cc57b850993458%2Fdivision_visitortypes_subtab2.png?alt=media)
14. Repeat Step 13 if there are other Visitor Types requiring Visitor Badge Card Types.
15. Close the Card Type list window.
16. Click the appropriate sub-tab(s) required to configure the division, and complete the setting information.

    **Note:** The minimum configuration required before you can save is Visitor Type and Host Type.

    * [Host Types and Access tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/host-types-and-access-tab.md)
    * [Visitor Fields tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/visitor-fields-tab.md)
    * [Cardscan Configuration](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/cardscan-configuration-tab.md)
    * [Visitor Fields on Visit tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/visitor-fields-on-visit-tab.md)
    * [Visit Configuration tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/visit-configuration-tab.md)
    * [Home Screen tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/home-screen-tab.md)
    * [Home Screen Macros tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/home-screen-macros-tab.md)
    * [Find Visitor Fields tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/find-visitor-fields-tab.md)
    * [Reception Actions tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/reception-actions-tab.md)
    * [Auto Offsite tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/auto-offsite-tab.md)
    * [Uninhibited Access Zones](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/uninhibited-access-zones-tab.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
