> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration.md).

# Command Centre Site Configuration

### Introduction

The following process is recommended so you perform each activity in the correct order when setting up Visitor Management for your site, and therefore the relationships between the various entities in Command Centre are maintained.

Where necessary, this process refers to step-by-step procedures that are either detailed in this section or elsewhere in this document.

**Notes:**

* Functionality specific to Visitor Management is only available in Command Centre if your site is licensed for Visitor Management.
* Visits that have been created in the Visitor Management application can be viewed in Command Centre. This is not part of the configuration process, but may be of use. See [Viewing Visits](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/viewing-visits-in-command-centre.md) for details.
* Many actions performed in the Visitor Management application will generate events and/or alarms in Command Centre. See the [Event Viewer](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-monitoring/event-viewer.md) and [Alarm Viewers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-monitoring/alarm-viewers.md) sections for details on how to process these alarms.
* An automated purge will run daily to purge expired visits from the system. See [Purging Expired Visits](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/purging-expired-visits.md) for details.
* In a multi-server system that uses Visitor Management, visit data does not get replicated between servers. Therefore, the Evacuation Report cannot report on remote visitors.

### Configuration Process

The configuration required in Command Centre involves a number of procedures:

**Note:** This list can be used as a checklist to ensure you have configured all the necessary components for Visitor Management.

<table><thead><tr><th width="336" valign="top">"System" related</th><th width="48" data-type="checkbox"></th><th valign="top">Procedure</th></tr></thead><tbody><tr><td rowspan="7" valign="top">Base system configuration (mandatory)</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-divisions.md">Create Cardholder Division</a></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-divisions.md">Create Visitor Division</a></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-a-reception.md">Create a Reception</a></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/setting-default-receptions-for-workstations.md">Assign Reception Workstation(s)</a></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-visitor-type-and-host-type-groups.md">Define Visitor Types</a></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-visitor-type-and-host-type-groups.md">Define Host Types</a></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup.md">Configure Visitor Management set up</a></td></tr><tr><td valign="top">If you intend using image capture device(s) other than the default</td><td>false</td><td valign="top">See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/using-image-capture-devices.md">Using Image Capture Devices</a> for supported devices</td></tr><tr><td valign="top">If you intend scanning business cards</td><td>false</td><td valign="top">Configure the fields to be displayed on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/cardscan-configuration-tab.md">Cardscan Configuration tab</a></td></tr><tr><td rowspan="2" valign="top">If you intend printing badges</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-card-types.md">Create a Card Type</a></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/adding-visitor-details-to-cards-badges.md">Add Visitor details to cards/badges</a></td></tr><tr><td valign="top">If access cards are to be issued</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/access-groups/setting-up-access-groups.md">Configure Access Groups</a></td></tr><tr><td valign="top">If Reception readers are going to be used</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-doors.md">Configure Doors</a></td></tr><tr><td valign="top">If Macros will be available for a Receptionist</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-macros.md">Configure Macros</a></td></tr></tbody></table>

<table><thead><tr><th width="336" valign="top">"People" related</th><th width="48" data-type="checkbox"></th><th valign="top">Procedure</th></tr></thead><tbody><tr><td valign="top">Allow permanent cardholders to be visitors.</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/assigning-permanent-cardholders-to-cardholder-division.md">Assign to Cardholder Division</a></td></tr><tr><td valign="top">If you require contact details for "Host" Cardholders</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/adding-contacts-to-quot-host-quot-cardholders.md">Add Contacts to "Host" Cardholders</a></td></tr><tr><td valign="top">Assign privileges to cardholders able to pre-register visits.</td><td>false</td><td valign="top">See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuration-examples.md">Configuration Examples</a> for recommended Operator Groups</td></tr><tr><td valign="top">Assign privileges to Receptionists who can create/edit visits and Visitors and perform the Visitor Management actions.</td><td>false</td><td valign="top">See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuration-examples.md">Configuration Examples</a> for recommended Operator Groups</td></tr><tr><td valign="top">Assign privileges to Receptionists who can only view Visit and Visitor details. They cannot perform the Visitor Management actions.</td><td>false</td><td valign="top">See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuration-examples.md">Configuration Examples</a> for recommended Operator Groups</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
