> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/visitor-management-kiosk-configuration.md).

# Visitor Management Kiosk Configuration

The Visitor Management Client (Classic) is designed around the concept of Receptions. The configuration relating to visits for each Reception is stored on a Reception's Division. All Receptions utilising the same configuration can be stored in the same Division to minimise the configuration required.

A Visitor Management Kiosk is represented in Configuration Client as a Workstation with the configuration for each of these Workstations determined by their default Reception.

**Important:** This applies even if there is no physical Reception with the Kiosks.

### Visitor Divisions

Two types of Divisions are used by the Visitor Management system for visits and visitors:

* **Find Visitor Divisions** (Cardholder Division)

  This division or divisions are where permanent Cardholders who are potential visitors on a visit will be found. Normal inheritance rules apply.
* **Save Visitor Division** (Visitor Division)

  This division is where the system saves visits and newly created visitors. So that visitors in this are available for future visits this Division will either be the same or a child division of the Find Visitor Divisions.

Whilst the configuration of the Save Visitor Division and the Find Visitor Divisions have nothing to do with determining who can be a host or escort, it is likely that hosts and escorts will be stored in the Find Visitor Divisions.

These Divisions are configured on the **Visit Configuration** sub-tab (which is on the **Visitor Management** tab of the Visitor Division), as follows:

* Drag and drop the appropriate Divisions into the **Find Visitors in these Divisions** grid, so that people from these divisions can be added to visits.
* Select a Division from the **Save Visitors in this Division** drop-down list.

See [Visit Configuration tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/visit-configuration-tab.md) for further detail.

### Configuration Process

The configuration process required in Command Centre involves a number of components listed below. Each component refers to a step-by-step procedure that is either detailed in this section, or those procedures marked with an \* are located in the 'Visitor Management' section.

Some of the components are base configuration for both Named Visitor visits and Tour Group visits, while others are specific to only one of the visit types.

**Notes:**

* This list can be used as a checklist to ensure you have configured all the necessary components for Visitor Management Kiosk.
* To configure a Division for Visitor Management at least one Visitor Type must be specified on the **Visitor Types** tab. While multiple types can be configured for use at a Reception, only one type can be used for Named Visitors checking in at a Kiosk. Multiple types can be used for Tour Groups regardless of whether they are checking in at a Reception or Kiosk.

<table><thead><tr><th width="336" valign="top">Base Kiosk configuration</th><th width="48" data-type="checkbox"></th><th valign="top">Procedure</th></tr></thead><tbody><tr><td valign="top">Create Find Visitor and Save Visitor Divisions</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-divisions.md">Creating Divisions</a> *</td></tr><tr><td valign="top">Create a Reception</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-a-reception.md">Creating a Reception</a> *</td></tr><tr><td valign="top">Set a default Reception for a Workstation, (i.e. Kiosk)</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/setting-default-receptions-for-workstations.md">Setting default Receptions for Workstations</a> *</td></tr><tr><td valign="top"><p>Create Visitor Types and Host Types.</p><p><strong>Note:</strong> To host a visit, (i.e. named visitor or Tour Group visit), a Cardholder must belong to a Host Type Access Group.</p></td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-visitor-type-and-host-type-groups.md">Creating Visitor Type and Host Type Groups</a> *</td></tr><tr><td valign="top">Configure text for the Welcome screen start options buttons, on the <strong>Kiosk Configuration</strong> tab.</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/kiosk-configuration-tab.md">Kiosk Configuration tab</a></td></tr><tr><td valign="top">Specify the Welcome screen background, Privacy Statement, Induction Material, Conditions of Entry and Timeouts on the <strong>Kiosk Screens</strong> tab.</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/kiosk-screens-tab.md">Kiosk Screens tab</a></td></tr></tbody></table>

If you require badges to be printed at the Kiosk:

<table data-header-hidden><thead><tr><th width="336" valign="top"></th><th width="48" data-type="checkbox"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top"><ul><li>Configure a Visitor Badge Card Type</li></ul></td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-card-types.md">Creating Card Types</a> *</td></tr><tr><td valign="top"><ul><li>Indicate this on the <strong>Reception Actions</strong> tab</li></ul></td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/reception-actions-tab.md">Reception Actions tab</a> *</td></tr><tr><td valign="top"><ul><li>Specify the Badge Layout on the <strong>Visitor Types</strong> tab</li></ul></td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup.md">Configuring Visitor Management setup</a> *</td></tr></tbody></table>

<table data-header-hidden><thead><tr><th width="336" valign="top"></th><th width="48" data-type="checkbox"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top">Configure the columns to display on the Kiosk 'Host Actions screen', on the <strong>Home Screen</strong> tab.</td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/home-screen-tab.md">Home Screen tab</a> *</td></tr><tr><td valign="top"><p>If you require notifications to be sent to Hosts when they have a visitor signed in at a Kiosk.</p><p><strong>Note:</strong> Notifications are subject to licence.</p></td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-notifications-for-hosts.md">Configuring Notifications for Hosts</a></td></tr></tbody></table>

*(Named Visitor visits can be created by the visit Host in the Visitor Management (VM) Client or by the visitor at the Kiosk.)*

<table><thead><tr><th width="336" valign="top">Specific Named Visitor Visits configuration</th><th width="48" data-type="checkbox"></th><th valign="top">Procedure</th></tr></thead><tbody><tr><td rowspan="2" valign="top"><p>Create a Visitor Type to be used for named visitors signing in at a Kiosk.</p><p><strong>Note:</strong> Many Visitor Types can be configured for a Reception (via the <strong>Visitor Types</strong> tab), and the Kiosk Visitor Type can be used for visitors checking in at a Reception where the VM Client is used. However, only one Visitor Type can be used for named visitors signing in at a kiosk.</p></td><td>false</td><td valign="top"><p>Configure details on the <strong>Visitor Types</strong> tab.</p><p>See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup.md">Configuring Visitor Management setup</a> *</p></td></tr><tr><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/kiosk-configuration-tab.md">Kiosk Configuration tab</a></td></tr><tr><td valign="top">Specify the Access Groups containing cardholders who can host visits for the Kiosk Visitor Type.</td><td>false</td><td valign="top">Configure 'Host Type' details on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/host-types-and-access-tab.md">Host Types and Access tab</a></td></tr></tbody></table>

If access cards will be assigned to named visitors:

<table data-header-hidden><thead><tr><th width="336" valign="top"></th><th width="48" data-type="checkbox"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top"><ul><li>Configure the type of card to be assigned</li></ul></td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/creating-card-types.md">Creating Card Types</a> *</td></tr><tr><td valign="top"><ul><li>Indicate this on the <strong>Reception Actions</strong> tab</li></ul></td><td>false</td><td valign="top"><a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/reception-actions-tab.md">Reception Actions tab</a> *</td></tr><tr><td valign="top"><ul><li>Configure the Access Groups available for assignment for the Kiosk Visitor Type</li></ul></td><td>false</td><td valign="top">Configure 'Visitor Access' details on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/host-types-and-access-tab.md">Host Types and Access tab</a></td></tr></tbody></table>

<table data-header-hidden><thead><tr><th width="336" valign="top"></th><th width="48" data-type="checkbox"></th><th valign="top"></th></tr></thead><tbody><tr><td rowspan="2" valign="top"><p>When visitors sign in at a Kiosk they are expected to identify themselves. PDFs can be configured for use in the search.</p><p><strong>Note:</strong> This configuration is also used by the Find Visitor search in the VM Client. PDF privileges can be used to hide information at the Kiosk that you want a Receptionist to see in the VM Client.</p></td><td>false</td><td valign="top">Configure the PDF to be used, and whether it is mandatory for the search, on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/kiosk-configuration-tab.md">Kiosk Configuration tab</a></td></tr><tr><td>false</td><td valign="top">Configure the columns to be shown in the search results on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/find-visitor-fields-tab.md">Find Visitor Fields tab</a> *</td></tr><tr><td valign="top"><p>Create/update visitor details.</p><p><strong>Note:</strong> This config is shared with the visitor details displayed/captured in the VM Client. Created visitors will be stored in the Save Visitor Division, and existing visitors will be stored in either the Save Visitor Division or one of the Find Visitor Divisions (if a permanent Cardholder).</p><p>Privileges can be used to control the details that are visible and editable by the visitor, allowing different rules to be applied for permanent Cardholders and adhoc visitors. Where a Cardholder is stored in a Division in which the kiosk operator does not have the privilege to edit their details any required field checks will be bypassed.</p></td><td>false</td><td valign="top">Configure the fields to be displayed on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/visitor-fields-tab.md">Visitor Fields tab</a><br>If an image PDF is configured on the Visitor Fields tab, instructions can be configured for the camera on the Kiosk Screens tab</td></tr><tr><td valign="top">If you want visitors to be able to scan a personal document, (e.g. Passport, Drivers License), to initiate a cardholder search.</td><td>false</td><td valign="top">Configure on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/kiosk-screens-tab.md">Kiosk Screens tab</a>.</td></tr><tr><td valign="top">If you want visitors to be able to scan their business card, to simplify and speed up the data entry process.</td><td>false</td><td valign="top">Configure the fields to be displayed on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/cardscan-configuration-tab.md">Cardscan Configuration tab</a></td></tr><tr><td valign="top"><p>'Your Visits screen', which shows pre-registered visits for the visitor.</p><p>(See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/visitor-management-kiosk-screens.md">Visitor Management Kiosk screens</a> for an example of this screen.)</p></td><td>false</td><td valign="top">The information shown on this screen comes from the visit and is not configurable.</td></tr></tbody></table>

There are two steps to creating a visit:

<table data-header-hidden><thead><tr><th width="336" valign="top"></th><th width="48" data-type="checkbox"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top"><ul><li><p>Identify the person (Host) the visitor is meeting with on the <strong>Kiosk Host Fields</strong> tab.</p><p><strong>Note:</strong> This configuration is also used on the 'Sign In Complete screen'. (See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/visitor-management-kiosk-screens.md">Visitor Management Kiosk screens</a> for an example of this screen.)</p></li></ul></td><td>false</td><td valign="top">Configure the host fields to be displayed on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/kiosk-host-fields-tab.md">Kiosk Host Fields tab</a></td></tr><tr><td valign="top"><ul><li>Enter details of the visit.</li></ul></td><td>false</td><td valign="top">This is not configurable.</td></tr></tbody></table>

*(Tour Group Visits can only be created by the visit Host in the Visitor Management Client.)*

<table><thead><tr><th width="336" valign="top">Specific Tour Group Visits configuration</th><th width="48" data-type="checkbox"></th><th valign="top">Procedure</th></tr></thead><tbody><tr><td rowspan="2" valign="top"><p>Create a Visitor Type to be used for Tour Group visits signing in at a Kiosk.</p><p><strong>Note:</strong> It is possible to have more than one Tour Group Visitor Type.</p></td><td>false</td><td valign="top"><p>Configure details on the Visitor Types tab.</p><p>See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup.md">Configuring Visitor Management setup</a> *</p></td></tr><tr><td>false</td><td valign="top">Check the 'Visitor Type is for Tour Groups' checkbox on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/host-types-and-access-tab.md">Host Types and Access tab</a></td></tr><tr><td valign="top"><p>Specify the Access Groups containing cardholders who can host visits for each Tour Group Visitor Type.</p><p><strong>Note:</strong> If you have different types of Tours, you can specify different Host Type Access Groups for the different Tour Group Visitor Types.</p></td><td>false</td><td valign="top">Configure 'Host Type' details on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/host-types-and-access-tab.md">Host Types and Access tab</a></td></tr><tr><td valign="top">'Tour Group Visits screen' (See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/visitor-management-kiosk-screens.md">Visitor Management Kiosk screens</a> for an example of this screen.)</td><td>false</td><td valign="top">The information shown on this screen comes from the visit and is not configurable.</td></tr></tbody></table>

<table><thead><tr><th width="336" valign="top">Specific Rapid Entry Visits configuration</th><th width="48" data-type="checkbox"></th><th valign="top">Procedure</th></tr></thead><tbody><tr><td rowspan="2" valign="top">Create a Visitor Type to be used for Rapid Entry visits signing in at a Kiosk.</td><td>false</td><td valign="top"><p>Configure details on the Visitor Types tab.</p><p>See <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup.md">Configuring Visitor Management setup</a> *</p></td></tr><tr><td>false</td><td valign="top">To use Rapid Entry, cardholders must be a member of the Rapid Visitor Type and Rapid Host Type Access Group, specified on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/configuring-visitor-management-kiosk/configuring-visitor-management-for-the-kiosk/host-types-and-access-tab.md">Host Types and Access tab</a>. Also, the Cardholder's division must be included in the <strong>Find Visitors in these Divisions</strong> grid on the <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management/command-centre-site-configuration/configuring-visitor-management-setup/visit-configuration-tab.md">Visit Configuration tab</a> *</td></tr></tbody></table>

### Sign In Complete

When an individual visitor or Tour Group leader has completed the sign in process at a Kiosk the following occurs:

* A badge is printed if configured.
* A notification will be sent to the Host subject to licence and configuration.
* The status of the visitor/Tour Group leader will change to 'signed in' or 'on-site' depending on configuration.
* The 'Sign In Complete screen' will display. The host details on this screen will be as configured on the **Kiosk Host Fields** tab.

### Hosts

A Host will 'sign in' at the Kiosk by badging at the reader when the 'Welcome screen' is displayed. A valid Host will be a member of any of the Host Type Access Groups configured for the Kiosk Visitor Type and/or Tour Group Visitor Types as configured on the **Host Types and Access** tab.

### In This Section

* [Configuration Example](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/visitor-management-kiosk-configuration/configuration-example.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/visitor-management-kiosk/visitor-management-kiosk-configuration.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
