> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/tag-tracking/configuring-the-tag-tracking-feature.md).

# Configuring the Tag Tracking feature

### Introduction

This procedure covers what you need to configure for the Tag Tracking feature.

**Note:** The 'Configure Site' operator privilege is required to perform this procedure.

***

### Configuration

To set up your site for Tag Tracking, perform the following procedures in Gallagher Configuration Client:

<details>

<summary>Configuring Card Technology settings</summary>

<table><thead><tr><th width="312">To enable...</th><th>See procedure...</th></tr></thead><tbody><tr><td>individual Gallagher T-Series Readers (i.e. only some Readers) to read tracking tags,</td><td><em>"Enabling tracking tags per Reader"</em></td></tr><tr><td>Gallagher T-Series Readers to read tracking tags by default for your whole site (not recommended),</td><td><em>"Enabling tracking tags for your whole site"</em></td></tr></tbody></table>

#### Enabling tracking tags per Reader

To enable individual Gallagher T-Series Readers (i.e. only some Readers) to read tracking tags, perform the following procedure:

1. Click **Configure** from the menu bar, then **Hardware**.

   The Hardware List Window opens.
2. Open the properties of the Gallagher T-Series Reader(s) that you wish to enable to read tracking tags.
3. Click the **Advanced** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-3a040b8c337b324c98716e010e097d92933845d8%2Freader_advanced.png?alt=media)
4. If the **Use the server settings** check box is checked, the Reader will use the configuration as specified on the Server Properties. See *"Enabling tracking tags for your whole site"* below to set the card technology server settings.
5. To configure permitted card technology specific to this Reader, deselect the **Use the server settings** check box and select the **Bluetooth Tracking Tags** check box.
6. Click **OK** to close and save your changes.

#### Enabling tracking tags for your whole site

To enable Gallagher T-Series Readers to read tracking tags by default for your whole site (not recommended), perform the following procedure:

1. Click **File** from the menu bar, then **Server Properties**.

   The **Server Properties** window opens.
2. Click the **Card Security** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e641153e10a41b5efd956cacf4047a54097758fd%2Fserverproperties.png?alt=media)
3. In the 'Permitted Card Technology' section of this screen, select the **Bluetooth Tracking Tags** check box.
4. Click **OK** to close and save your changes.

</details>

<details>

<summary>Configuring Reader settings</summary>

**The Minimum accepted signal strength**

The 'Minimum accepted signal strength' provides an approximate control for the distance from the Reader within which a tracking tag will be read. A lower minimum accepted signal strength allows the Reader to read tracking tags that are farther away.

1. Click **Configure** from the menu bar, then **Hardware**.

   The Hardware List Window opens.
2. Right-click the Gallagher T-Series Readers for which you want to set the 'Minimum accepted signal strength', and select **Properties**.
3. Click the **Tag Tracking Settings** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-6174f10e5bcf68d0a5c25e40cc1f33e7b6c27661%2Freader_tagtrackingsettings.png?alt=media)
4. In the **Minimum accepted signal strength** field, enter the signal strength (in dBm) that this Reader will require for it to read a tracking tag. Received signal strengths less than this value will be ignored.

   **Recommendation:** To give the Reader the best chance of receiving advertisements from a tag that passes it, Gallagher recommends leaving the 'Minimum accepted signal strength' as the default value (-127).

   This will best counter the factors that can impact the received signal strength, including:

   * Transmission strength configured within the tag
   * Tag low battery
   * Objects that may alter the radio path loss between the tag and the reader
   * Atmospheric conditions.
5. Click **OK** to close and save your changes.

   Click **Cancel** to close without saving your changes.

   Click **Apply** to save your changes and stay in this window.

</details>

<details>

<summary>Configuring Door settings</summary>

**The Minimum out-of-range time.**

A Door's 'Minimum out-of-range time' is the time for which a tracking tag's advertisements must not be received by the Door before the tag can be again considered for an access decision at that Door.

* When a tag first comes within range of a Reader, an access decision is made.
* While the tag remains in range of the Reader, no further access decisions are made.
* Once the tag goes out of range of the Reader, the Minimum out-of-range time must pass before it can come back within range and be treated as another access attempt.
* If the tag comes back within range before the Minimum out-of-range time has passed, it is not considered as another access attempt, and the timer is reset.

**Warning:** Gallagher recommends leaving the Minimum out-of-range time as the default value. Lowering the value may cause excess access decisions to be made due to intermittently received tag advertisements.

1. Click **Configure** from the menu bar, then **Doors**.

   The Door List Window opens.
2. Right-click the Doors for which you want to set the 'Minimum out-of-range time', and select **Properties**.
3. Click the **Tag Tracking Settings** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1dfed7e311747212ec2dcb0b3b274bce6d79cac3%2Fdoor_tagtrackingsettings.png?alt=media)
4. In the **Minimum out-of-range time** field, enter the time (in seconds) that a tracking tag must be out of range of the Door's Readers for before it is considered for another access decision.
5. Click **OK** to close and save your changes.

   Click **Cancel** to close without saving your changes.

   Click **Apply** to save your changes and stay in this window.

</details>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/tag-tracking/configuring-the-tag-tracking-feature.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
