> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/tension-overload.md).

# Tension Overload

### Introduction

The maximum tension rating for a Z10 sensor is 200 kg.

If the sensor reports a tension rating exceeding 200 kg, the load cell within the sensor may have incurred damage and should be replaced.

When such an event occurs, a Sensor Abnormal alarm is raised in Command Centre. For example, \[*Z10 Tension Sensor Group Name* ] wire \[*Number* ] tension overload. This alarm remains active, until the sensor is replaced.

### Visual identification

To visually identify a sensor that has reported a tension overload, you will need to perform a Maintenance Mode override, or Walk Test Mode override for the sensor group. Refer to the topics [Performing a Maintenance Mode Override](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/performing-a-maintenance-mode-override.md), or [Performing a Walk Test Mode Override](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/performing-a-walk-test-mode-override.md) for details.

When a sensor has reported a tension overload event, the sensor's LED will display one of the following flash patterns:

<table><thead><tr><th width="318">LED</th><th>Tension Overload Status</th></tr></thead><tbody><tr><td>3 Flash for 3 seconds (Green), then<br>3 Flash for 3 seconds (Red, Blue then Green)</td><td>The wire tension is within target tension range. The sensor has reported a tension overload event.</td></tr><tr><td>3 Flash for 3 seconds (Red), then<br>3 Flash for 3 seconds (Red, Blue then Green)</td><td>The wire is over tensioned. The sensor has reported a tension overload event.</td></tr><tr><td>3 Flash for 3 seconds (Blue), then<br>3 Flash for 3 seconds (Red, Blue then Green)</td><td>The wire is under tensioned. The sensor has reported a tension overload event.</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/tension-overload.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
