> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/configuring-a-d10-tautwire-sensor.md).

# Configuring a D10 Tautwire Sensor

### Introduction

This procedure describes how to configure a D10 Tautwire Sensor.

### Procedure

1. Click **Configure** from the menu bar, then **Hardware**.

   The **Hardware** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/tree-view.md)).
2. **Right click** and select **New\...Sensor Devices** > **D10 Tautwire Sensor**.

   By default the **General** tab displays.
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Event Response** tab, and configure as required.

   For further detail see [Event Response tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/event-response-tab.md).
5. Click the **Alarm Instructions** tab, and configure as required.

   For further detail see [Alarm Instructions tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/alarm-instructions-tab.md).
6. Click the **Connections** tab.

   The fields **Connected to** and **Device number** will only be populated once you assign the sensor to a Controller.
7. Click the **Configuration** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e62188dedf679d396717a5e4b54221363670e101%2Fd10sensor_configurationtab.png?alt=media)
8. Configure the fields as required:

   <table><thead><tr><th width="168">Field</th><th>Description</th></tr></thead><tbody><tr><td>Detection Window</td><td><p>This value indicates the least amount of time that the Detection Threshold must be exceeded by in order to indicate an alarm.</p><p>(Default = 1 second. Range = 0.01 seconds to 60.00 seconds, i.e. 1 minute)</p></td></tr><tr><td>Detection Threshold</td><td><p>This value is the threshold that the processed value must exceed for a certain duration in order to indicate an alarm.</p><p>(Default = 200. Range = 1 to 1000)</p></td></tr><tr><td>Alarm Latch Duration</td><td><p>This number determines how long an alarm condition is maintained after alarm condition is reached.</p><p>(Default = 2.5 seconds. Range = 0.01 seconds to 600.00 seconds, i.e. 10 minutes)</p></td></tr></tbody></table>
9. If required, check the **Output Selection LED** checkbox.

   When checked the device provides a visual indicator if the device is in alarm.
10. Click the **Cameras** tab if you want to associate a DVR Camera(s) with this Tautwire Sensor.

    For further details see [Cameras tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/cameras-tab.md).
11. Click the **Icons** tab if you want to change the Icon Set for this Tautwire Sensor.

    For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
12. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Tautwire Sensor.

    For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
13. Click the **Notes** tab if you want to add a note(s) about this Tautwire Sensor.

    For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
14. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

A new D10 Tautwire Sensor has been configured.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/configuring-a-d10-tautwire-sensor.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
