> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors.md).

# Perimeter Sensors

### Introduction

The following sensors can be connected to Command Centre and configured as hardware items, for the purpose of perimeter intrusion detection:

* Z10 Tension Sensors
* Z20 Disturbance Sensors
* D10 Tautwire Sensors

**Notes:**

* Z10 Tension Sensors, Z20 Disturbance Sensors and D10 Tautwire Sensors can be connected to the Controller 6000 and 7000.
* A maximum of 64 Z10 sensors can be connected to a Controller 6000 and 7000; either all off the same HBUS port, or spread over two.
* The Z10 Tension Sensor measures wire tension and signals an alarm when the wire tension exceeds the predetermined attack alarm threshold. Because the sensor measures wire tension, it can also signal an alarm when the wire tension exceeds predetermined maintenance alarm thresholds.

***

### Licensing

The use of sensors with Command Centre is a licensable feature. The total number of sensors is governed by the license, as follows:

`[Limits]`\
`Z10 Tension Sensors=X` OR `Disturbance Sensors=X`

Where `X` is the number of sensors your site is allowed.

***

### Operator Privileges

<table><thead><tr><th width="198">Operator Privilege</th><th>is required to...</th></tr></thead><tbody><tr><td>"View Site"</td><td>view Z10 Tension Sensor Groups, Z20 Disturbance Sensors and D10 Tautwire Sensors</td></tr><tr><td>"Edit Site"</td><td>view and edit Z10 Tension Sensor Groups, Z20 Disturbance Sensors and D10 Tautwire Sensors</td></tr><tr><td>"Maintenance Override"</td><td>override Z10 Tension Sensor Groups, Z20 Disturbance Sensors and D10 Tautwire Sensors</td></tr></tbody></table>

***

Select the item below that you require further detail on:

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a Z10 Tension Sensor Group](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/configuring-a-z10-tension-sensor-group.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Fence Configuration example](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/configuring-a-z10-tension-sensor-group/fence-configuration-example.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Performing a Maintenance Mode Override](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/performing-a-maintenance-mode-override.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Performing a Walk Test Mode Override](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/performing-a-walk-test-mode-override.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Tension Overload](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/tension-overload.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a Z20 Disturbance Sensor](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/configuring-a-z20-disturbance-sensor.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a D10 Tautwire Sensor](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/configuring-a-d10-tautwire-sensor.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Assigning Z20 and D10 sensors to a Controller 6000 or 7000](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/assigning-z20-and-d10-sensors-to-a-controller-6000-or-7000.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Performing a ‘Log Tuning Data’ override on a Z20 Disturbance Sensor](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors/performing-a-log-tuning-data-override-on-a-z20-disturbance-sensor.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/perimeter-sensors.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
