> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/locker-management-solution/configuring-a-locker-bank/setup-tab.md).

# Setup tab

1. Click the **Setup** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-3a515184b6a0e375c0ae527b48e94f621c92c5a8%2Flockerbanksetup.png?alt=media)
2. Select a controller from the **Controller** drop-down list.
3. Select a lock from the **Lock type** drop-down list.

   By default, Mortise is selected.
4. Configure the Locker timeouts as required.

   <table><thead><tr><th width="312">Option</th><th>This setting...</th></tr></thead><tbody><tr><td>Locker is confirmed as closed after</td><td><p>is to stop Locker door bounce causing a forced door alarm.</p><p>(Valid range is 0 - 5000 milliseconds. Default = 200 milliseconds)</p></td></tr><tr><td>Lock unlock time</td><td><p>determines the maximum time the Unlock relay is energised.</p><p>(Valid range is 1 - 86400 seconds. Default = 60 seconds)</p></td></tr><tr><td>Locker is 'Open Too Long' if still open after</td><td><p>determines when a Locker Open Too Long alarm is generated.</p><p>(Valid range is 5- 9999 seconds. Default = 90 seconds)</p></td></tr><tr><td>Locker is 'Forced Open' if opened while still locked</td><td>when checked, causes a Forced Locker alarm to be generated if the open sensor detects the Locker is opened.</td></tr><tr><td>Extended access time</td><td><p>determines an alternate unlock time, allowing the Locker to remain unlocked for longer than normal for those cardholders who require it, (e.g. disabled people, couriers, etc.).</p><p>(Valid range is 0 - 86400 seconds. Default = 120 seconds)</p></td></tr><tr><td>Access Credentials</td><td><p>Specify the first and second <strong>Access Credentials</strong> required to access the locker bank. The default first access credential required is "Card". The default second access credential required is "None".</p><p><strong>Note:</strong> If "User Code" is exclusively selected, a Mobile Credential cannot be used to open a locker. Mobile connect uses Passcode or Fingerprint (or Face ID) for second factor authentication.</p></td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/locker-management-solution/configuring-a-locker-bank/setup-tab.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
