> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/locker-management-solution/configuring-a-locker.md).

# Configuring a Locker

If you need to configure a large number of Lockers, you can use the Bulk Configuration Tool. Refer to the *Bulk Configuration Tool* page on the Gallagher Security Hub for further detail:

[https://resources.security.gallagher.com/Install,\_Upgrade\_and\_Tools/Tools\_and\_Utilities/Bulk\_Configuration\_Tool](https://help.security.gallagher.com/knowledge-hub/deployment-resources/support-tools-and-troubleshooting/bulk-configuration-tool)

**Note:** An account is required to access the Security Hub, so register if needed.

Perform the following procedure to configure a Locker.

1. From the Gallagher Configuration Client main menu, click **Configure > Lockers.**
2. Right-click and select **New\...Locker.**

   The Locker Properties window opens to the **General** tab by default.
3. Complete the fields as required. For further details see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Event Response** tab, and assign a primary Alarm Zone for all events.

   For further detail see [Event Response tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/event-response-tab.md).

   **Notes:**

   * The Locker Bank Alarm Zone is assigned to the Locker automatically when creating a new Locker.
   * If you receive an *"Unable to save configuration as an Alarm Zone is required"* message, assign a primary Alarm Zone to the Locker and try again.
5. Click the **Alarm Instructions** tab, and configure as required.

   For further details see [Alarm Instructions tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/alarm-instructions-tab.md).

   **Notes:**

   * The **Status and Overrides** tab shows the Locker status. Once the Locker is fully configured, you can override it by selecting Open Locker from the Override drop-down list.
   * The **Cardholders** tab is read-only, and it shows the current assignments.
6. Click the **Setup** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-68239093001f9fb357d2ce8bdfbd78f7509e5fd3%2Flockersetup.png?alt=media)
7. Select a Locker Bank from the **Locker Bank** drop-down list.

   **Note:** You must select a Locker Bank for a Locker. Otherwise, the *'Locker must have a Locker Bank'* error displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-180e17e4ad1fa191a8d7a1bc59bdd0f28283b2fb%2Flocker_nolockerbankerror.png?alt=media)
8. Select a sensor from the **Open sensor** drop-down list.

   **Note:** The Locker cannot verify if the assigned I/O is unique.
9. Select an output from the **Unlock output** drop-down list.

   **Note:** The Locker cannot verify if the assigned I/O is unique.
10. Click the **Icons** tab if you want to change the Icon Set for this Locker.

    For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
11. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Locker.

    For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
12. Click the **Notes** tab if you want to add a note(s) about this Locker.

    For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
13. Click **OK** to exit and save your changes.

    Click **Apply** to save your changes and stay in this window.

    Click **Cancel** to exit without saving your changes.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/locker-management-solution/configuring-a-locker.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
