> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms/configuring-a-jacques-intercom-system.md).

# Configuring a Jacques Intercom System

### Introduction

This topic describes how to configure a Jacques Intercom System in Command Centre, allowing the Jacques IP Intercom System to be integrated with Command Centre.

**Notes:**

* Only one Jacques IP Intercom System can be configured in Command Centre.
* Operators require the “Edit Site” operator privilege to be able to add, modify and delete the Jacques Intercom System.

### Procedure

1. Click **Configure** from the menu bar, then **External Systems**.

   The External Systems List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/glossary-of-terms.md#tree-view)).
2. Right click and select **New\...Jacques Intercom System**.

   By default the **General** tab displays.
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Event Response** tab, and configure as required.

   For further detail see [Event Response tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/event-response-tab.md).
5. Click the **Alarm Instructions** tab, and configure as required.

   For further detail see [Alarm Instructions tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/alarm-instructions-tab.md).
6. Click the **Setup** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-37f71d1d451e1141d21b1e17d5dc445f0b9b3584%2Fjacquesintercomsystem_setuptab.png?alt=media)
7. Enter the IP Address in the **Address** field.

   This will be the IP address that workstations use to make the initial connection to the Intercom server.
8. Enter the unique **Serial Number** issued to your site by Jacques. Range = 0 to 2147483647

   This Serial Number is usually the **uvalue** of tag '10101' in the **tag\_device** table in the Jacques database, located at:

   Jacques > Webcfg > MySQL > Databases > siteconfigDB > tag\_device

   If you are unsure, Gallagher recommends asking Jacques for your site's unique serial number.
9. Click the **Cameras** tab if you want to associate a DVR Camera(s) with this Intercom System.

   For further details see [Cameras tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/cameras-tab.md).
10. Click the **Icons** tab if you want to change the Icon Set for the Intercom System.

    For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
11. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Intercom System.

    For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
12. Click the **Notes** tab if you want to add a note(s) about the Intercom System.

    For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
13. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

The Jacques Intercom System has been created and displays at the root level of the External Systems window, with no children.

To check that the Jacques Intercom System is online, check that it, (e.g. **tag** '10101') displays with a **curstate** of 'online' in the **device\_state** table, located at:

Jacques > Webcfg > MySQL > Databases > stateDB > device state

### Hint

{% hint style="info" %}
**Editing and Deleting Jacques Intercom Systems**

Refer to [Editing items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/editing-items.md) and [Deleting items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/deleting-items.md) for procedures on how to edit and delete Jacques Intercom Systems.

**Notes about deleting the Jacques Intercom System:**

* The Jacques Intercom System will only allow deletion if it does not have any children, (i.e. no Jacques Intercoms referencing it).
* If an item is on a Site Plan you will not be able to delete it until it is removed from the Site Plan.
  {% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms/configuring-a-jacques-intercom-system.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
